CLASSIC PRO CL, CLX, XP, XPD, & XT

OKUMA 0930734 GOLD ANODIZED CLUTCH BAR SCREW...

OKUMA 0930696 & 09301225 HANDLE NUT RETAINER SCREW (03412...

OKUMA 0930588 SCREW (03223x12-61) This is the screw that secures the vice side plate (click side cover) to the main body...

OKUMA 0930549 VICE SIDE PLATE SCREW (03222...

OKUMA 0930176 SCREW (03222.6x9...

OKUMA 0930519 SCREW...

OKUMA 0930448 SCREW...

OKUMA 0930071 SCREW (03123...

OKUMA 0920291 WASHER (025.9x10x0...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0930219 CLICK PAWL SPRING & HOLD PLATE MOUNTING SCREW (03327.5x2...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0910096, 0910097, 0910099*, 0910103, 0910104, 0910280, & 0910327 BALL BEARING *Ball bearing numbers 0910096, 0910097,  0910099, 0910103, 0910104, 0910280, 0910327, 01081605-5, 01081605-6,...

OKUMA 0920157 WASHER (028.1x12x0.8-6)

OKUMA 0920154 DRIVE GEAR WASHER (028.1x12x0.5-6) This is the washer that resides on the back side of the drive gear that that separates it from the ball bearing on spinning reels...

OKUMA 0920117 WASHER (025x6.2x0.2-6)

OKUMA 26120056 KEY...

OKUMA 0930426 COUNTER COVER SCREW, LARGE (03122x26-61) This is the longer screw that is used to secure the counter cover to the handle side plate. Two are required...

OKUMA 29000002 'E' RETAINER (12900002-06) This is the 'E' retainer that is located at the end of the worm shaft on the drive or handle side of the reel...

OKUMA 0930194, 0930195, & 0930609* SCREW (03312X5-617 & 03312X3.5-61) *Screw numbers 0930194, 0930195, 0930609, 03312X5-617, & 03312X3.5-61 are all the same part that were just assigned a different...

OKUMA 0930575 SCREW (03222X4.5-61) On conventional star drag reels- This is the screw used to secure the spool click gear to the actual spool itself. two are required for this application. On spinning reels- This is...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930226* & 0930230 HANDLE NUT PLATE SCREW *Screw numbers 0930226, 0930230, 03412.6x4-61, & 03412.6x5-61 are all the same part that were just assigned a different number over the years. This is...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...