STR-45D

OKUMA ARS-2 NEOPRENE REEL COVER FOR 10/15 LEVER DRAGS & 30/40/300/450 STAR DRAG REELS Okuma Reel Shield Neoprene Reel Covers are seam-sealed, waterproof, neoprene reel covers that keep reels and drags dry and...

DAIWA HB-1 PRECISION REEL OILER (64110100) Handy one drop lube in a convenient tube with a pocket clip and fits perfectly in your tackle...

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA PA1115 REEL OIL 0.35 OZ.

6.2:1 HIGH SPEED GEAR CONVERSION SET CATALINA CT-25C, 25D, 25L, 30C, 30D, 30L, 45C, 45D, 45D, 45L, 305Da, & 455Da CLARION CLR-303L, 304D, 453L, & 454D COLD WATER CW-303D &...

OKUMA STORMRUNNER STR-30D & 45D CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Stormrunner STR-30D & 45D reels in only minutes by adding a new set...

OKUMA 16000187 & 16000226 CAST CONTROL CAP KIT *** Color tone may vary slightly from photo due to availability. ALC MAG SURF ALC-20CS STORM RUNNER STR-20D, 30D, &...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma rod brace clamp & hardware kit...

OKUMA 11050006 WORM SHAFT BUSHING (11105003-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11170011* & 11170017 HANDLE RETAINER NUT *Handle retainer nut numbers 11170011, 11170017, & 11117007-03001 are all the same part, just assigned a different production number. CATALINA CT-15C,...

OKUMA 12010013 ANTI-RE PAWL (11201013-06001) BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, & 45L CONVECTOR CN CN-30CS CONVECTOR CV...

OKUMA 12040016 COMPRESSION SPRING (11204008-06001) *This is the long coil spring that resides at the base of the drive gear shaft that actuates the auto trip mechanism...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12110002 & 12110006* ANTI REVERSE PAWL PIN *Part numbers 12110002, 12110006, 11211002-03001, 11211002-03, & 11211005-03001 are all the same part that were just assigned a different...

OKUMA 12160004 ANTI-RE PAWL SPRING *Spring numbers 12160004, 11216001-06, & 11216001-06002 are all the same part that were just assigned a different production number. CATALINA CT-15C, 15D, 15L, 20C,...

OKUMA 13020017 & 13020018 WASHER

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 13020025 WASHER (1130201301) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050003, 13050006, 13050012, & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been...

OKUMA 14010052 SPOOL CLICK GEAR  Please examine the part you are replacing closely & compare it to the one in the picture as there has been a recent design change. If it does not look like the one in the picture,...

OKUMA 14010030 STAR DRAG CLICK GEAR...

OKUMA 15150001 & 15150002* HANDLE NUT LOCK SCREW *Screw number 15150001, 15150002, 11515001-03907, & 11515001-06001 are all the same part that was just assigned a different production number...

OKUMA 16090002, 16090003, 16090004*, & 16090009 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the...

OKUMA 16110037 & 16110045 EARED WASHER (1161101201 &...

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the spring washer that prevents any binding issues between the star drag knob & the handle arm itself. *Washer numbers 16140001,...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17000241*, 17000243, & 17000244 DRIVE GEAR (11700027-03002) *This drive gear may arrive in brass or stainless steel. BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25D, 25L, 30C, 30D, 30L, 45C,...

OKUMA 17010135, 17010142, 17010144*, & 17010146 DRIVE GEAR SHAFT Drive gear shaft numbers 17010135, 17010142, 17010144, 17010146, 1170103106001, 1170103406001, & 1170103416001 are all the same part that were just...

OKUMA 17020279, 17020282, 17020285, 17020325, & 17020477* PINION GEAR *Pinion gear numbers 17020279, 17020282, 17020285, 17020325, 17020477, 11702033062, 1170203303002, & 1170203306002  are all the...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CLARION CLR-453L, 453LS, & 454D CLASSIC PRO CL-450L & 452L CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L,...

OKUMA 17040019 LINE GUIDE SUPPORT BAR (11704004-03001) *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." AURORA CLASSIC CL-45L CATALINA CT-45D, 45L &...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17080014* & 17080015 TRANSMISSION GEAR *Transmission gear numbers 17080014, 17080015, 1708008-01001, & 1708009-01001 are all the same part that were just assigned different numbers over the...

OKUMA 17100030 & 17100032* LINE GUIDE ASSEMBLY (1171001406917) *Please note that this line guide is the direct replacement / upgrade for the now discontinued #17100030 & 1171001406002 guide assemblies...

OKUMA 17120038 & 17120081* WORM SHAFT *Worm shaft numbers 17120038, 17120081, & 11712030-03001 are all the same part that were just assigned a different production number.  This worm shaft will not fit in the...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 17200005 DRIVE GEAR SHAFT...

OKUMA 18000012 & 18000014* CLUTCH CAM / CLUTCH SHAFT Clutch cam numbers 18000012, 18000014, 11800004-02002, & 11800004-12002 are all the same part, that were just assigned a different production...

OKUMA 18010007 & 18010012* CLUTCH SPRING (11801005-06001) AVENGER AV-300L CATALINA 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da CLASSIC PRO CLX (XT)...

OKUMA 0930732 CLUTCH BAR SCREW

OKUMA 18040008* &18040015 CLUTCH CAM SLIDER (011804008-06001) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 305Da, & 455Da CEDROS CSD-10, 10S, 12S, & 15S CLARION CLR-303L,...

OKUMA 18050004 PINION GEAR YOKE (11805004-06001) *On some parts diagrams this may also be referred to as the "clutch yoke". BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D,...

OKUMA 18060001, 18060002, & 18060003* YOKE SPRING *Yoke spring numbers 18060001, 18060002, 18060003, 11806001-06, & 11806001-061 are all the same part that were just assigned a different...

OKUMA 18070001 & 18070002* YOKE BRAKE PLATE *Part numbers 18070001, 18070002, 11807001-06001, & 11807001-06001 are all the same part that were just assigned different production numbers...

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19000002 WORM SHAFT TRANSMISSION GEAR 'E' RETAINER (11900002-06) This is the very small 'E' retainer located at the end of the worm shaft on the counter side that secures the small conical plastic gear that...

OKUMA 0910080, 0910152, 0910153, 0910694, & 0910695* ONE WAY BALL BEARING *Ball bearing numbers  0910080, 0910152, 0910153, 0910694, 0110160901, 01101609-6, & 01101609-61 are all the same part...

OKUMA 0920076 WASHER (023.5x6x0.5-3) BAITCAST REELS: This is the washer that resides under the 'E' retainer that secures the clutch bar support in place. STAR DRAG REELS: This is the washer that is found...

OKUMA 0930060 SIDE PLATE SCREW (03122.6x9-61)

OKUMA 0930663 SCREW (033272.6x4...

OKUMA 0920162 WASHER (028x10x0...

OKUMA 0920111 WASHER (025.1x11.5x.5-6) This is the washer that generally resides between the yoke brake plate & the hold plate bushing...

OKUMA 0930566 SCREW (03222...

OKUMA 0930062 & 09301491* (03122x8-62) On star drag line counter reels: This is the smallest (black) screw of the three screws that secure the counter cover to the handle side plate. On spinning reels: This...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930585 SCREW (03723x11.5-61) This is the Screw that secures the Handle Side Plate to the Main Body Assembly...

OKUMA 0930588 SCREW (03223x12-61) This is the screw that secures the vice side plate (click side cover) to the main body...

OKUMA 0930448 SCREW...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0930219 CLICK PAWL SPRING & HOLD PLATE MOUNTING SCREW (03327.5x2...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0930426 COUNTER COVER SCREW, LARGE (03122x26-61) This is the longer screw that is used to secure the counter cover to the handle side plate. Two are required...

OKUMA 0920326 STAR DRAG KNOB FRICTION WASHER (028.1x12x0.5-0) This is the washer that is located between the star drag knob & the click gear index...

OKUMA 0930194, 0930195, & 0930609* SCREW (03312X5-617 & 03312X3.5-61) *Screw numbers 0930194, 0930195, 0930609, 03312X5-617, & 03312X3.5-61 are all the same part that were just assigned a different...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920133 CLEAR HANDLE WASHER (026x13x0...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...