ISX-30B, ISX-30R, & ISX-30W

OKUMA 0.35 OZ. REEL OIL

OKUMA 240015349 SPOOL ASSEMBLY INSPIRA ISX-30W Multi-disc, oiled felt drag system. Machined aluminum, 2-tone anodized...

OKUMA 240015350 SPOOL ASSEMBLY INSPIRA ISX-30B Multi-disc, oiled felt drag system. Machined aluminum, 2-tone anodized...

OKUMA 25006076 & 25006083 HANDLE ASSEMBLY INSPIRA ISX-30R, ISX-30W, ISX-40R, ISX-40W, 2500a, 2500Sa, &...

OKUMA 25006077 HANDLE...

OKUMA 25130873 HANDLE SCREW CAP INSPIRA ISX-20R, ISX-20W, ISX-30R, ISX-30W, ISX-40R, &...

OKUMA 25130874 HANDLE SCREW CAP INSPIRA ISX-20B, ISX-30B, & ISX-40B  This will work equally good on any Inspira ISX-20R, ISX-20W, ISX-30R, ISX-30W, ISX-40R, OR ISX-30W if toy don't mind the...

OKUMA 26003814 DRAG KNOB INSPIRA ISX-20W, ISX-30W, &...

OKUMA 26003816 & 26003818 DRAG KNOB INSPIRA BLUE ISX-20B, ISX-30B, & ISX-40B *This will work equally good on any Inspira Red ISX-20R,  ISX-30R, or ISX-40R if you don't mind the...

OKUMA 21050012 PINION BEARING FIXED PLATE...

OKUMA 21056571 PINION BEARING FIXED...

OKUMA 21056578 PINION BEARING FIXED...

OKUMA 21120178 FOOT LABEL...

OKUMA 21120180 FOOT LABEL DECORATION INSPIRA ISX-30B *This part will work just fine on the Inspira ISX-30R if you don't mind the...

OKUMA 23050216 KICK LEVER  INSPIRA ISX-30B, ISX-30R, & ISX-30W INSPIRA 2500a &...

OKUMA 23090051 BAIL ARM SLIDER *This part is also referred to as the "Bail Arm Support Pin" or Bail Arm Yoke". AZORES Z-40S CAYMUS & CEYMAR C-10, C-25, C-25 WH, C-30, C-35, C-35 WH, C-40, & C-40...

OKUMA 23100090 & 23100095 COMPRESSION...

OKUMA 23134340 BAIL WIRE INSPIRA ISX-30B, ISX-30R, &...

OKUMA 23150029 LINE ROLLER...

OKUMA 23160014 LINE ROLLER...

OKUMA 23170024 LINE ROLLER...

OKUMA 23170026 LINE ROLLER...

OKUMA 23180005 ROTOR NUT (12318003-03) 10mm Reverse Thread...

OKUMA 24050042 DRAG WASHER RETAINER

OKUMA 24070009 EXTENDED SPRING...

OKUMA 25040004 HEXAGON HANDLE SCREW CAP WASHER *Washer numbers 25040004, 25040007, 12504003-01, & 12504004-0114 are all the same part that were just assigned a different production number that may arrive in...

OKUMA 27000318 DRIVE GEAR *Drive Gear numbers 27000318, 27000223, 27000224, 27000400, 12612037-06001, 12700073-02001, & 12700073-02002 are all the same part, just assigned a different production number...

OKUMA 27020759, 27020907, 27020908, 27020909, & 27020911 PINION GEAR AZUL AZ-30a AVENGER BAITFEEDER ABF-30b BARBARIAN BN-30 BEATER BE-25 & BE-30 CARBONITE REAR DRAG CBR-230 &...

OKUMA 27050099 TRANSMISSION GEAR Important installation tip below! When replacing this Transmission Gear, it needs to be synchronized with the drive gear & can be easily done by locating the red (or black)...

OKUMA 27080096 & 27080118 OSCILLATING SLIDER AVENGER AV-15a, AV-20a, AV-25a,  AV-25b, AV-30b, AV-30b-LE, & AV-30Mb AZUL AZ-30a BEATER BE-25 & BE-30 CALIFORNIAN (UR SERIES) TC-15a...

OKUMA 27160008 OSCILLATION SLIDER PLATE AQUIOS AQ-20 AVALON AN-20 AVENGER AV-15a, AV-20a,  AV-25a, AV-25b, AV-30b, AV-30b-LE, & AV-30Mb CALIFORNIAN (UR SERIES) TC-15a & TC-20a BEATER BE-25 &...

OKUMA 27180703 MAIN SHAFT AVENGER AV-25b, AV-30b, AV-30b-LE, & AV-30Mb CAYMUS & CEYMAR C-25, C-25 WH, C-30, & C-30 WH CEYMAR XT CXT-25 & CXT-30 DEAD EYE DE-25 & DE-30 INSPIRA ISX-30B,...

OKUMA 27190025 CLICK GEAR Click Gear numbers 27190025, 27190026, & 12719020-06001 are all the same part that was just assigned a different production number...

OKUMA 27220009 CLICK GEAR WASHER (12722008-01002) This is the small black or clear Teflon washer that resides on the main shaft (#718) between the spool click gear (#719) & the actual spool itself (#400). In some cases...

OKUMA 27220037 CLICK GEAR WASHER (1272202301) This is the small steel washer that resides halfway down the Main Shaft #718 just below the Spool Click Gear #719...

OKUMA 28000324 ANTI REVERSE LEVER AQUIOS AQ-20 AVALON AN-20 AVENGER ABF-20a, ABF-20b, & ABF-30b AVENGER BAITFEEDER AV-15, AV-15a, AV-20a, AV-25a, AV-30b, AV-30b-LE, & AV-30Mb BARBARIAN...

OKUMA 28000437 ANTI REVERSE LEVER HELIOS HSX-20, HSX-30, HSX-40 & HSX-40S INSPIRA ISX-20B, ISX-20R, ISX-20W, ISX-30B, ISX-30R, ISX-30W, ISX-40B, ISX-40R, & ISX-40W INSPIRA 2500a, 2500Sa, & 3000a SATO 25,...

OKUMA 28010024 ANTI-REVERSE LEVER SPRING...

OKUMA 24130009...

OKUMA 0910039 STAINLESS STEEL BALL BEARING *Ball Bearing numbers 0910039, 0910041, 0910253, 0910254, 0910255, 0910256, 0910381, 01071103-5, 01071103-51, 01071103-61, 01071103-511, 01071103-612, 01071103-613, &...

OKUMA 0910049 STAINLESS STEEL BALL BEARING *Ball Bearing numbers 0910049, 0910050, 0910051, 0910053, 0910054, 0910263, 0910326, 01071405-5, 01071405-6, 01071405-51, 01071405-61, 01071405-511, 01071405-613, &...

OKUMA 0910091 STAINLESS STEEL BALL BEARING *Ball Bearing numbers 0910091, 0910093, 0910272, 0910273, 0910274, 0910278, 0910361, 01081404-5, 01081404-51, 01081404-511, 01081404-615, & 6K582201 are all the...

OKUMA 0910221 STAINLESS STEEL BALL BEARING *Ball Bearing numbers 0910221, 0910215, 0910216, 0910335, 0910484, 01040725-5, 01040725-51, 01040725-61, 01040725-615 are all the same part that were just assigned a...

OKUMA 0910300 ONE WAY ANTI REVERSE BALL BEARING *Please note that this One Way Bearing Inner Ring length of .350" (8.89mm). If you have the larger Inner ring of .413" (10.48mm) please click here. **Bearing numbers...

OKUMA 0910525 ONE WAY ANTI REVERSE BALL BEARING *Please examine the One Way Bearing you are replacing closely & compare it to the one in the photographs as there has been a design change. If it...

OKUMA 0920154 DRIVE GEAR WASHER (028.1x12x0.5-6) This is the washer that resides on the back side of the drive gear that that separates it from the ball bearing on spinning reels...

OKUMA 0920376 DRIVE GEAR WASHER This is the thin Washer that resides between the back of the Drive Gear & the Ball Bearing...

OKUMA 0930044 SCREW (03122...

OKUMA 09301074 BAIL WIRE...

OKUMA 0930209 SCREW (03324.5x2.6X6...

OKUMA 0930429 SCREW...

OKUMA 0930438 SCREW...

OKUMA 0930541 BAIL ARM COVER / ANTI-RE LEVER SCREW This is the screw that secures the Anti Reverse lever #800 to the Anti Reverse Lever Shaft, or will secure the Bail Arm Cover to the Rotor Arm...

OKUMA 0930643 SCREW (03325.92.66.561) On Conventional Star Drag Reels: This Screw would be used to secure the Hold Plate (#207) to the Main Side Plate (#200). On Spinning Reels: This...

OKUMA 0930673 SCREW (03327x2...

OKUMA 0930794 SCREW On star drag reels; this is the screw that secures the counter cover to the handle side plate. On spinning reels; this is the screw that secures the pinion bearing fixed plate to the main body...