CLASSIC PRO CL SERIES

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

Rotary Tool Buffing Wheel 15/16" MC13 180 grit Scotch BriteTM abrasive.Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA CLASSIC PRO CL-552 & 552W SERIES CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Classic Pro 552 Series reel in only minutes by adding a...

OKUMA DLX & LX CAST CONTROL CAP KIT The best way to go to take all the guess work out of missing parts & way cheaper too! Important note! This Cast Control Cap Kit has a reverse thread & will only work on left...

OKUMA AURORA CLASSIC OR CLASSIC PRO SERIES CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Aurora Classic or Classic Pro series reel in only...

OKUMA 16000038 CAST CONTROL CAP KIT (11600014-03001) The best way to go to take all the guess work out of missing parts & way cheaper too! This updated kit consists of one each of a Cast Control Cap, Metal End Thrust...

OKUMA 17150003, 17150004, 17150008, & 17150009 LINE GUIDE PAWL If you need a Line Guide Pawl for any Okuma 15, 20, 25, 30, or 45 Size level wind reel, this O.E.M. part is it & If your...

OKUMA 15000121, 15000134, 15000157, & 15000159 HANDLE ASSEMBLY (1150000604006 & 1150001004907) *Please note that this handle is now only available in the black finish. AURORA CLASSIC CL-30L &...

OKUMA 15000171 & 15000173 TWO POSITION BALANCED HANDLE ASSEMBLY *Handle numbers 15000171, 15000173, 1150001304905A, & 1150001304907A are all the same part that were just assigned a different number...

OKUMA ROD BRACE CLAMP & HARDWARE KIT (LARGE) The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp & Hardware Kit uses...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp &...

OKUMA15000105 SILVER TWIN HANDLE ARM ASSEMBLY (1150000504X) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, 202L, 300, 300C, 300L, 300LX, 302C, 302L, & 302LX MAGDA / MAGDA PRO MA-15D, 15DX, 20D,...

OKUMA15000105 BLACK TWIN HANDLE ARM ASSEMBLY (1150000504907) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, 202L, 300, 300C, 300L, 300LX, 302C, 302L, & 302LX MAGDA / MAGDA PRO MA-15D, 15DX, 20D,...

OKUMA 11050006 (11105003-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 (11105004-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11140036, 11140037, & 111400047 ROD & REEL BRACE / CLAMP (CLAMP ONLY) The Brace itself will fit reel seats with mounting hole dimensions from @ 1 1/4" to 1 3/8" (@ 32mm to 35mm) which does...

OKUMA 11140005, 11140006, 11140044, 111400048, & 11140068 ROD & REEL BRACE / CLAMP (CLAMP ONLY) This Brace itself will fit reel seats with mounting hole dimensions from @ 1 9/16" to 1 11/16" (@ 41mm to...

OKUMA 11150003 ROD BRACE CLAMP BOLT FLAT HEAD

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT

OKUMA 11170013 10mm HANDLE NUT (11117005-03002) This nut has a reverse thread & will only work on left hand retrieve model reels only. If you need a standard thread nut, please click here...

OKUMA 11170010, 11170012, & 41170001 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different...

OKUMA 11070021 LINE GUARD (11107018-06001) This is the steel bar with internal threads that is located inside the top of the Main Body Assembly that secures the Left Side & Right Side Hangers (#108 & #108-1) with...

OKUMA 11080014 HANGER (11108010-06001) CLASSIC PRO CL-552 & 552W DIEZEL DZ-55 STAR DRAG SD-55, 55L, &...

OKUMA 12010018 ANTI REVERSE PAWL (11201010-06001) CATALINA CT-55C, 55N, & 55W CLASSIC PRO CL-552 & 552W CONVECTOR CN / CV-55, 55L, 55LS, 55S, 55SS, & 55W DIEZEL DZ-55 STAR...

OKUMA  12010011 ANTI REVERSE PAWL (11201008-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200C, 200C, 202, 202C, & 202L CLASSIC PRO CLX (XT) CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L &...

OKUMA 12010001 ANTI REVERSE PAWL (11201001-06) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, & 452L CLASSIC PRO XT CLX-300L, 302L, 450L, 450LX,...

OKUMA 12070056 STAINLESS STEEL HOLD PLATE (11207022-06001) CATALINA CT-55C, 55N, & 55W CLASSIC PRO CL-552 & 552W CONVECTOR (CN) CN-55, 55L, 55S, 55SS, & 55W CONVECTOR (CV) CV-55, 55L,...

OKUMA 12070044 & 12070048 HOLD PLATE *Please note that due to availability, this product may arrive in brass or steel. AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450C, 450L ,452, 452C, & 452L (FIRST GEN...

OKUMA 12070046 HOLD PLATE (11207011-03001) AVENGER AV-300L (1st Generation) AURORA CLASSIC CL-30L CLASSIC PRO CL-300, 300C, 300L, 302C, & 302L (1st Generation) CONVECTOR CN-30C, 30D, & 30L DIEZEL DZ-30D &...

OKUMA 12070052 HOLD PLATE (11207017-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, & 20L DIEZEL DZ-20D & 20L SEARAY SR-20L  STAR...

OKUMA 12150013 & 12150015 HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production number...

OKUMA 12080024 SIDE PLATE COVER (11208012-06001) CATALINA CT-55C, 55N, & 55W CLARION CLR-553L & 553LS CONVECTOR CN / CV-55, 55L, 55LS, 55S, 55SS, &...

OKUMA 12110009 ANTI REVERSE PAWL PIN (11211003-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-150L 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO...

OKUMA 12110008 & 12110034 ANTI REVERSE PAWL PIN (11211002-03001) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C,...

OKUMA 12160003 ANTI-RE PAWL SPRING (11216002-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-200L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, &...

OKUMA 12160001, 12160002, 12160010, & 12160018 ANTI REVERSE PAWL SPRING *Part numbers 12160001, 12160002, 12160010, 12160018, 11216001-06, & 11216001-06001 are all the same part that...

OKUMA 13110023 SIDE PLATE COVER (11311005-06001) CLASSIC PRO CL-452, 452C, & 452L CATALINA CT-45C, 45D, & 45L CONVECTOR CN / CV 45C, 45CS, 45D, 45DS, 45L, & 45LS MAGDA MA-45DX SEARAY...

OKUMA 13030042 CLICK BUTTON (11303007-03907) AURORA CLASSIC CL-20L CLASSIC PRO  CL-150L, 200C, 200L, 202, 202C, & 202L CLASSIC PRO CLX CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L &...

OKUMA 15160001 & 15160002 HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different number which...

OKUMA 13020005 SPOOL SHAFT BUSHING (11302005-03) This is the bronze bushing that supports the end of the spool shaft that resides in the click side cover...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This Drive Gear Shaft Bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 16170008 & 16170023 DRIVE GEAR SHAFT BUSHING (OUTER) Bushing numbers 16170008, 16170023, 11617005-03, 11617018-01001, & 11617006-01002 are all the same part that were just assigned a different...

OKUMA 13020025 WASHER...

OKUMA 16170013 DRIVE GEAR SHAFT BUSHING (11617012-03001)*This Drive Gear Shaft Bushing has an overall length of .2590" (just a hair over 1/4" or 6...

OKUMA 16170018 DRIVE GEAR SHAFT BUSHING (INNER) *Drive Gear Shaft Bushing numbers 16170018, 11617006-01, & 11617015-03 are all the same part that were just assigned a different production number. **This Drive...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050007 CLICK PAWL SPRING (PLASTIC) *Click Pawl Spring numbers 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different number over the years that may arrive...

OKUMA 13050003 & 13050015 CLICK SPRING (1130500201) *Please note that the stainless steel version of this Click Spring has been discontinue & has been replaced with this copper version which works equally as...

OKUMA 14000284 GRAPHITE SPOOL ASSEMBLY CLASSIC PRO CL-300LX, 302LX, 300LX, 300LXa, 302LX, & 302LXa MAGDA PRO MA-30DLX & 30DLXT *Spool numbers 14000284, 14000285, 11400010-0112B, & 114000100112B are...

OKUMA 14000304 & 14000309 SPOOL ASSEMBLY *Spool numbers 14000304, 14000309, 1140002901001C, & 11400029-01001C are all the same spool that were just assigned a different production...

OKUMA 14000282 SPOOL ASSEMBLY Spool Assembly numbers 14000282, 14000283, 114000100112, & 11400010-0112 are all the same part that were just assigned a different production number. AURORA CLASSIC...

OKUMA 17100009 LINE GUIDE ASSEMBLY (1171000506) CLASSIC PRO CL-300L, 300LX, 302L, & 302LX DIEZEL DZ-30D MAGDA PRO MA-30D, 30DLT, 30DT, 30DX, 30DLX, 30DLXT, & 30DXT ROX 30DX SCHEELS OUTFITTERS SO-30LC,...

OKUMA 14010002 & 14010026 SPOOL CLICK GEAR  *Spool Click Gear numbers 14010002, 14010026, 1140101101, 11401001-05001, & 11401001-05002 are all the same part that were just assigned a...

OKUMA DRAG SPRING WASHER SET *Drag Spring Washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the same part that were just assigned a...

OKUMA 16110040 METAL EARED WASHER This is the metal "Eared Drag Washer or "Drag Plate" that is always located in the middle of the drag sequence as shown in the photo below. Washer numbers...

OKUMA 16110005 & 16110006 EARED WASHER  *Eared Washer numbers 16110005, 16110006, & 11611005-06 are all the same part that were just assigned a different production number...

OKUMA 16120045 DOMED KEY WASHER (11612026-06001) This is the Domed metal "Keyed Drag Washer or "Drag Plate" that is always located on the very top of the drag sequence as shown in the...

OKUMA 16120027 KEY...

OKUMA 16120029 KEY...

OKUMA 16140001 & 16140003 DRAG SPRING WASHER This is the Spring Washer that prevents any binding issues between the Star Drag Knob & the Handle arm itself. *Washer numbers 16140001,...

OKUMA 16150009 & 16150202 STAR DRAG KNOB (11615003-01001)   *Please note that this will work just fine as a replacement for the Okuma Searay SR-20L (#16150016) if you don't mind the color!   AURORA...

OKUMA 16150022 STAR DRAG *Star Drag numbers 16150022, 16150041, & 116150005-01001A are all the same part that were just assigned a different production number. This Star Drag Knob has reverse thread & is for left...

OKUMA 16150021 STAR DRAG (11615005-01001) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, 452L, 552, & 552W CLASSIC PRO XT CLX-300L, 300La, 302L, 302La,...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides between the inside of the Cast Control Cap & the metal End Thrust Washer. We also include this in our Cast Control Kits...

OKUMA 17000205, 17000210, & 17000211 DRIVE GEAR *Drive gear numbers 17000205, 17000210, 17000211, 1170000803006, 11700008-03002, & 11700008-03006 are all the same part that were just assigned a...

OKUMA 17000247 STAINLESS STEEL DRIVE GEAR (1170002806002) CATALINA CT-55C & 55W CLARION CLR-553L CLASSIC PRO CL-552 & 552W CONTOURA CR-553 & 603 CONVECTOR CN / CV-55, 55L, 55SS,...

OKUMA 17000026, 17000199, & 17000200 DRIVE GEAR  Drive gear numbers 17000199, 17000200, 11700006-032, 11700006-03002, & 1170000603002 are all the same part that were just assigned different production...

OKUMA 17010132 DRIVE GEAR SHAFT This Drive gear Shaft has an overall length of approx. 1.820" (46mm). CLASSIC PRO CL-552 & 552W DIEZEL DZ-55 STAR DRAG SD-55, 55L, &...

OKUMA 17010065 & 17010068 DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010065, 17010068, 1170100903001, & 1170100913001 are all the same part, that were just assigned a different number which has an...

OKUMA 17010071 DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010071, 17010075, & 1170101603001 are all the same part that were just assigned a different production number that has an overall length of approx. 1...

OKUMA 17010084 DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010084, 17010086, 17010087, 17010274, 1170102003001, 1170102013001A, & 1170102013001B are all the same part, that were just assigned a different number which...

OKUMA 17020264 PINION GEAR *This is the stainless steel version of pinion gear numbers 17020264, 17020265, 17020266, 17020354, 17020482, 11702030-06002, 11702030062, & 1170203003002  which...

OKUMA 17020243 & 17120244 PINION GEAR *Pinion gear numbers 17020243, 17120244, 11702008032, & 1170200803002 are all the same part that were just assigned a different number that will only work on left...

OKUMA 17020023, 17020322, & 17020237 PINION GEAR *Pinion gear numbers 17020023, 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part,...

OKUMA 17020246 PINION GEAR (1170201103002) Before you buy this gear... Please examine the Pinion Gear you are replacing closely & compare it to the one in the photographs. If the spool shaft does not look...

OKUMA 17020310 PINION GEAR (1170203603002) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L & 202La CLASSIC PRO XPD...

OKUMA 17030008 WORM SHAFT GUARD (11703009-03) AURORA CLASSIC CL-20L CATALINA CT-205Da, 20D, & 20L CLARION CLR-203L & 204D CLASSIC PRO CL-200L & 202L CLASSIC PRO CLX (XT) CLX-200L &...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CLARION CLR-453L, 453LS, & 454D CLASSIC PRO CL-450L & 452L CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L,...

OKUMA 17030004 & 17030006 WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XT...

OKUMA 17040013 WORM GUIDE SUPPORT BAR *Part numbers 17040013, 17040022, 11704009-03, & 11704009-03907 are all the same part, that were just assigned a different production number. CLASSIC PRO CL-200C &...

OKUMA 17040008 WORM GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XPD LINE COUNTER XPD-30D, 30Da, 30DLX, &...

OKUMA 17040010 WORM GUIDE SUPPORT BAR (11704006-03) CLASSIC PRO CL-300C & 302C CONTOURA CR-30CS CONVECTOR CN / CV-30C & 30CS STAR DRAG...

OKUMA 17040025 LINE GUIDE SUPPORT BAR (11704016-03001) CLASSIC PRO CL-450C & 452C CONTOURA CR-453CS CONVECTOR CN / CV-45C & 45CS DIEZEL DZ-45C STAR DRAG...

OKUMA 17040007 WORM GUIDE SUPPORT BAR (11704004-03907) AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450L, 452, & 452L CONVECTOR CN-45 & 45L CONVECTOR CV-45D & 45L DIEZEL DZ-45L MAGDA PRO MA-45D &...

OKUMA 17040012 LINE GUIDE SUPPORT BAR *Support Bar numbers 17040012, 17040021, 11704008-03, & 11704008-03907 are all the same part that were just assigned a different production number AURORA CLASSIC...

OKUMA 17050011 WORM SHAFT TRANSMISSION GEAR (11705006-06) This is the steel Transmission Gear that resides on the end of the Worm Shaft that is located on the Clicker side of the reel. This is also referred to as the...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel Transmission Gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060003 TRANSMISSION GEAR (11706002-06) *This is the small Transmission Gear that resides on the end of the spool shaft on the clicker side of the reel. This Gear may arrive in either a cast steel or brass finish...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel Transmission Gear that resides on the end of the spool axle shaft on the clicker side of the reel that is secured be 'C' retainer #19000001...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the Transmission Gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17070009 TRANSMISSION GEAR (11707008-11) This is the "stepped" Transmission Gear that is located under the Click Pawl Spring that is secured to the Vice Side Plate with one small Phillips screw & is also referred...

OKUMA 17090004 & 17090017 TRANSMISSION GEAR BUSHING *This is the brass bushing that resides on the vice side plate ("click side, side cover") that helps reinforce the post that the transmission gear is secured to...

OKUMA 17100011 LINE GUIDE ASSEMBLY (1171000606) *Please note that due to availability, this part may arrive in either a chrome plated or gold anodized finish. CLASSIC PRO CL-450L & 452L MAGDA MA-45D, 45-DX, &...

OKUMA 17100040 & 17100070 LINE GUIDE ASSEMBLY (1171000906) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200L, & 202L CLASSIC PRO CLX (XT) CLX-150La & 200La DIEZEL DZ-20L MAGDA MA-15D, 15DLT, 15DT-T,...

OKUMA 17120026 WORM SHAFT *Worm Shaft numbers 17120026, 17120051, 17120062, 1171203701, & 11712019-03 are all the same part that were just assigned a different production number over the years. AURORA...

OKUMA 17120021 WORM SHAFT (11712011-03907) *Please examine the worm shaft you are replacing closely & compare it to the one in the photographs as there has been a design change on the Convector CV-45L. This...

OKUMA 17120014 WORM SHAFT *Worm Shaft numbers 17120019, 17120020, 17120055, 11712005-03, & 11712010-13907 are all the same part that were just assigned different production numbers. AURORA CLASSIC CL-30L...