MA-30DXT

DAIWA HB-1 PRECISION REEL OILER (64110100) Handy one drop lube in a convenient tube with a pocket clip and fits perfectly in your tackle...

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

CARBON FIBER DRAG WASHER SET FOR OKUMA MAGDA & MAGDA PRO SERIES REELS BY DRAGMASTERS Drastically increase the performance potential of any Okuma Magda or Magda Pro series reel in only minutes by...

OKUMA 16000038 CAST CONTROL CAP (11600014-03001) This cast control cap is for right hand retrieve reels only & will not work on any DLX or LX left hand retrieve reels. For that application click here. Also, this...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL If you need a line guide pawl for any Okuma 15, 20, 25, 30, or 45 size level wind reel, this O.E.M. part is it & If your unsure, just...

OKUMA 15000467* & 15000470 HANDLE ASSEMBLY CLASSIC PRO CLX XT CLX-300La, 302La, 302LXa, 450La, 452La, & 452LXa CLASSIC PRO XP XP-302La, 452C, & 452La CLASSIC PRO XPD  XPD-30Da &...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT 8mm

OKUMA 11170010, 11170012*, & 41170001 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different...

OKUMA 12010001, 12010057, & 12010089 ANTI REVERSE PAWL (11201001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, 300C, 300L, 300LX, 300LXAG, 302C, 302L, 302LX,...

OKUMA 12070097 HOLD PLATE AVENGER AV-300L CLASSIC PRO CL-300L & 302L CLASSIC PRO LINE COUNTER XPD-30D & 30Da MAGDA PRO MA-30D, 30DT, 30DX, & 30DXT MAGDA PRO XPD MA-30XPD, XPD-30D, &...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12110008 & 12110034 ANTI REVERSE PAWL PIN (11211002-03001) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C,...

OKUMA 12120095 COUNTER COVER ASSEMBLY MAGDA PRO MA-15DLT, 15DT, 15DXT, 20DLT, 20DT, 20DLXT, 20DXT, 30DLT, 30DT, 30DLXT, 30DXT, 45DT, & 45DXT SCHEELS OUTFITTERS SO-15LCB, 20LCB, 20LCLXB, 30LCB,...

OKUMA 12150029 HOLD PLATE BUSHING (11215031-0115) This is the small white or black bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12150030 HOLD PLATE BUSHING (11215031-0114) This is the white bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12160001, 12160002, 12160010, & 12160018* ANTI REVERSE PAWL SPRING *Part numbers 12160001, 12160002, 12160010, 12160018, 11216001-06, & 11216001-06001 are all the same part that...

OKUMA 15160001 & 15160002* HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different...

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This drive gear shaft bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050002 & 13050007* CLICK PAWL SPRING (PLASTIC) *Click pawl spring numbers 13050002, 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different...

OKUMA 13050003, 13050006, 13050012, & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been...

OKUMA 14000282* & 14000283 SPOOL ASSEMBLY Spool assembly numbers 14000282, 14000283, 114000100112, & 11400010-0112 are all the same part that were just assigned a different production number...

OKUMA 14010052 SPOOL CLICK GEAR  Please examine the part you are replacing closely & compare it to the one in the picture as there has been a recent design change. If it does not look like the one in the picture,...

OKUMA 16090002, 16090003, 16090004*, & 16090009 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the...

OKUMA 16110005 & 16110006 EARED...

OKUMA 16120027 KEY...

OKUMA 16120029 KEY...

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the spring washer that prevents any binding issues between the star drag knob & the handle arm itself. *Washer numbers 16140001,...

OKUMA 16150021 STAR DRAG (11615005-01001) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, 452L, 552, & 552W CLASSIC PRO XT CLX-300L, 300La, 302L, 302La,...

OKUMA 13020014 & 13020015 WASHER (11302002-06001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17000026, 17000199, & 17000200* DRIVE GEAR  Drive gear numbers 17000199, 17000200, 11700006-032, 11700006-03002, & 1170000603002 are all the same part that were just assigned different production...

OKUMA 17010079 DRIVE GEAR SHAFT This drive gear shaft is equipped with the "Auto Trip®" lug & has an overall length of approx. 1.735" (44mm). CLASSC PRO CLX CLX-300L, 300La, 302L, 302La, 450L, 450La, 452L,...

OKUMA 17020023, 17020322, & 17020237 PINION GEAR *Pinion gear numbers 17020023, 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part,...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XT...

OKUMA 17040008 LINE GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XPD LINE COUNTER XPD-30D, 30Da, 30DLX, 30DLXa,...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel transmission gear that resides on the end of the spool shaft on the clicker side of the reel that is secured be 'C' retainer #19000001. AURORA...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17080003 TRANSMISSION GEAR (11708003-11) This is the small "conical" transmission gear that is located on the drive side of depth counter equipped reels mounts to the end of the worm shaft secured by a small...

OKUMA 17100009 LINE GUIDE ASSEMBLY (1171000506) CLASSIC PRO CL-300L, 300LX, 302L, & 302LX DIEZEL DZ-30D MAGDA PRO MA-30D, 30DLT, 30DT, 30DX, 30DLX, 30DLXT, & 30DXT ROX 30DX SCHEELS OUTFITTERS SO-30LC,...

OKUMA 17120090 WORM SHAFT MAGDA PRO DXT MA-30DXT SCHEELS...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 18000005 & 18000008* CLUTCH CAM Clutch cam numbers 18000005, 18000008, 11800002-02002, & 11800002-12002 are all the same part, that were just assigned a different production number which is also...

OKUMA 18010023 CLUTCH SPRING CLASSIC PRO XPD-30Da MAGDA PRO MA-30DT & 30DXT MAGDA PRO XPD SERIES MA-30XPD, XPD-30D, & 30DB ROX ROX-30DX SCHEELS OUTFITTERS SO-30LCA & 30LCB STRATAMASTER...

OKUMA 18020157 CLUTCH BAR MAGDA PRO MA-30DT & 30DXT SCHEELS...

OKUMA 0930732 CLUTCH BAR SCREW

OKUMA 18040001 CLUTCH CAM SLIDER (11804001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L, 302LX, 450, 450C, 450L, 452, 452C, & 452L CLASSIC...

OKUMA 18050001 PINION GEAR YOKE (11805001-06) *On some parts diagrams this may also be referred to as the "clutch yoke". AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L,...

OKUMA 18060001, 18060002, & 18060003* YOKE SPRING *Yoke spring numbers 18060001, 18060002, 18060003, 11806001-06, & 11806001-061 are all the same part that were just assigned a different...

OKUMA 19100145 COUNTER ASSEMBLY MAGDA PRO MA-15DLT, 15DT-T, 15DXT, 15DXT-T, 20DLT, 20DT, 20DLXT, 20DXT, 20DXT-DE, 30DLT, 30DT, 30DLXT, & 30DXT SCHEELS OUTFITTERS SO-15LCB, 20LCB, 20LCLXB, 30LCB, &...

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19000002 WORM SHAFT TRANSMISSION GEAR 'E' RETAINER (11900002-06) This is the very small 'E' retainer located at the end of the worm shaft on the counter side that secures the small conical plastic gear that...

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic transmission gear (#706) in...

OKUMA 0910365 BALL BEARING Inner DIA. 8mm  16mm Outer DIA. 16mm  Thickness...

OKUMA 0930438 SCREW (03122x8-61) On spinning reels, this is one of several screws that secure the side plate to the main body & once the rotor is removed, is located above the one way ball bearing. On star drag line...

OKUMA 0920126 WASHER (026.05x9x0...

OKUMA 0920108 WASHER (025.1x10...

OKUMA 0930626 SCREW...

OKUMA 0920076 WASHER (023.5x6x0.5-3) BAITCAST REELS: This is the washer that resides under the 'E' retainer that secures the clutch bar support in place. STAR DRAG REELS: This is the washer that is found...

OKUMA 0920315 WASHER (027x8x0...

OKUMA 0920283 WASHER (025.1x8x0.5-6) *On star drag reels: this is the washer that resides between the base of the drive gear shaft & the bronze hold plate bushing. *On lever drag reels: this is the washer that resides...

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the washer that generally resides on the worm shaft between the worm shaft bushing & 'E' clip on the handle side of the reel...

OKUMA 0920276 WASHER (024x5.2x0...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0930219 CLICK PAWL SPRING & HOLD PLATE MOUNTING SCREW (03327.5x2...

OKUMA 0910096, 0910097, 0910099*, 0910103, 0910104, 0910280, & 0910327 BALL BEARING *Ball bearing numbers 0910096, 0910097,  0910099, 0910103, 0910104, 0910280, 0910327, 01081605-5, 01081605-6,...

OKUMA 0930194, 0930195, & 0930609* SCREW *Screw numbers 0930194, 0930195, 0930609, 03312X5-617 & 03312X3.5-61 are all the same part that were just assigned a different production number...

OKUMA 0930575 SCREW (03222X4.5-61) On conventional star drag reels- This is the screw used to secure the spool click gear to the actual spool itself. two are required for this application. On spinning reels- This is...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930226* & 0930230 HANDLE NUT PLATE SCREW *Screw numbers 0930226, 0930230, 03412.6x4-61, & 03412.6x5-61 are all the same part that were just assigned a different number over the years. This is...

OKUMA 0930196 CLICK BUTTON SCREW (03312x5-61) This is the screw that secures the click pawl to the click button. If you intend to use this screw or if your schematics call for use of this screw as a slider screw, your...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...