CLR-454D

DAIWA HB-1 PRECISION REEL OILER (64110100) Handy one drop lube in a convenient tube with a pocket clip and fits perfectly in your tackle...

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA PA1115 REEL OIL 0.35 OZ.

6.2:1 HIGH SPEED GEAR CONVERSION SET CATALINA CT-25C, 25D, 25L, 30C, 30D, 30L, 45C, 45D, 45D, 45L, 305Da, & 455Da CLARION CLR-303L, 304D, 453L, & 454D COLD WATER CW-303D &...

CARBON FIBER DRAG WASHER SET F0R CLARION CLR-303 THRU 454 SERIES REELS BY DRAGMASTERS Drastically increase the performance potential of any Okuma Clarion CLR-303L, 304D, 453L, 453LS, & 454D reel in only...

OKUMA 16000099 & 16000140 TROLLING SPOOL CONTROL (TSC) CAST CONTROL CAP CATALINA CT-305Da & 455Da CLARION CLR-304D &...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma rod brace clamp & hardware kit...

OKUMA 11050006 WORM SHAFT BUSHING (11105003-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT 8mm

OKUMA 11170011* & 11170017 HANDLE RETAINER NUT *Handle retainer nut numbers 11170011, 11170017, & 11117007-03001 are all the same part, just assigned a different production number. CATALINA CT-15C,...

OKUMA 29010001 WASHER (12901001-06) This is also referred to as a "push nut" or "press on retainer"...

OKUMA 12040016 COMPRESSION SPRING (11204008-06001) *This is the long coil spring that resides at the base of the drive gear shaft that actuates the auto trip mechanism...

OKUMA 12010037 ANTI REVERSE PAWL (11201029-06002) CATALINA CT-305Da & 455Da CEDROS CSD-10, 10S, 12S, & 15S CLARION CLR-303, 304D, 453L, 453LS, & 454D COLD WATER 303D, 303DLX, 303DS, 453D, & 453DS CONTORA...

OKUMA 12070083 HOLD PLATE (11207049-01001) CATALINA CT-455Da, 45C, 45D, & 45L CLARION CLR-453L, 453LS, & 454D CONTOURA CR-453CS CONVECTOR CV-45C, 45D, 45DS, 45L, & 45LS MAGNETICS MG-45CS &...

OKUMA 12110012 ANTI REVERSE PAWL PIN (11211005-03002) CATALINA CT-205Da, 305,Da, & 455Da CLARION CLR-203L, 204D, 303D, 303L, 453L, 453LS, 454D, 553L & 553LS COLD WATER CW-553LS CONTOURA CR-203CS, 303CS,...

OKUMA 12290001 & 12290002 TROLLING SPOOL CONTROL (TSC) CLICK SPRING / WASHER CATALINA CT-305Da & 455Da CLARION CLR-304D &...

OKUMA 12280002 TROLLING SPOOL CONTROL (TSC) CLICK WASHER (11228001-06001) CATALINA CT-305Da & 455Da CLARION CLR-304D &...

OKUMA 12240019 ONE WAY BEARING CLUTCH CAP (11224017-02002) CATALINA CT-305Da & 455Da CLARION CLR-304D &...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12160006*, 12160007, & 12160011 ANTI REVERSE PAWL & CLICK SPRING *Spring numbers 12160006, 12160007, 12160011, & 1121600401 are all the same part that were just assigned a different...

OKUMA 13001018 VICE SIDE PLATE CLARION...

OKUMA 16130018 TSC WASHER (1161301901) CATALINA CT-305Da & 455Da CLARION CLR-304D &...

OKUMA 12300001 TROLLING SPOOL CONTROL (TSC) DRAG WASHER RETAINER (11230001-06001) CATALINA CT-305Da & 455Da CLARION CLR-304D &...

OKUMA 13030052 CLICK BUTTON (1130301301) CLARION CLR303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS MAG SYSTEM MS-25CS, 25LS, 30CS, 30LS, 45CS, &...

OKUMA 13040013 CLICK PAWL (1130401201) CATALINA CT-305Da CLARION CLR303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS MAGNETICS MG-30CS, 30LS, 45CS, & 45LS MAG SYSTEM MS-15CS, 15LS, 20CS, 20LS,...

OKUMA 13050009 CLICK PAWL SPRING (1130500301) CATALINA CT-305Da & 455Da CEDROS CSD-10, 10S, 12, 12S, & 15S CLARION CLR-303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS CORTEZ CZ-10CS,...

OKUMA 14010002 & 14010026* SPOOL CLICK GEAR *Please note that this part may arrive in either white or black molded plastic. **Spool click gear numbers 14010002, 14010026, 1140101101,...

OKUMA 14010030 STAR DRAG CLICK GEAR...

OKUMA 15150001 & 15150002* HANDLE NUT LOCK SCREW *Screw number 15150001, 15150002, 11515001-03907, & 11515001-06001 are all the same part that was just assigned a different production number...

OKUMA 16090002, 16090003, 16090004*, & 16090009 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the...

OKUMA 16100063 TROLLING SPOOL CONTROL (TSC) DRAG WASHER (11610006-01003) CATALINA CT-305Da & 455Da CLARION CLR-304D &...

OKUMA 16110037 & 16110045 EARED WASHER (1161101201 &...

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the spring washer that prevents any binding issues between the star drag knob & the handle arm itself. *Washer numbers 16140001,...

OKUMA 16150164 STAR DRAG ASSEMBLY (1161501701927) CATALINA CT-305Da & 455Da CLARION CLR-304D, 454D, 553L, & 553LS CONTOURA CR-553 &...

OKUMA 17000241*, 17000243, & 17000244 DRIVE GEAR (11700027-03002) *This drive gear may arrive in brass or stainless steel. BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25D, 25L, 30C, 30D, 30L, 45C,...

OKUMA 17010135, 17010142, 17010144*, & 17010146 DRIVE GEAR SHAFT Drive gear shaft numbers 17010135, 17010142, 17010144, 17010146, 1170103106001, 1170103406001, & 1170103416001 are all the same part that were just...

OKUMA 17020279, 17020282, 17020285, 17020325, & 17020477* PINION GEAR *Pinion gear numbers 17020279, 17020282, 17020285, 17020325, 17020477, 11702033062, 1170203303002, & 1170203306002  are all the...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CLARION CLR-453L, 453LS, & 454D CLASSIC PRO CL-450L & 452L CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L,...

OKUMA 17040019 LINE GUIDE SUPPORT BAR (11704004-03001) AURORA CLASSIC CL-45L CATALINA CT-45D, 45L & 455Da CLARION CLR-453L, 453LS, & 454D CONVECTOR CV-45DS & 45LS MAGNETICS MG-45LS MAG SYSTEM MS-45LS MAGDA...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel transmission gear that resides on the end of the spool shaft on the clicker side of the reel that is secured be 'C' retainer #19000001. AURORA...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17080014* & 17080015 TRANSMISSION GEAR *Transmission gear numbers 17080014, 17080015, 1708008-01001, & 1708009-01001 are all the same part that were just assigned different numbers over the...

OKUMA 17100030 & 17100032* LINE GUIDE ASSEMBLY (1171001406917) *Please note that this line guide is the direct replacement / upgrade for the now discontinued #17100030 & 1171001406002 guide assemblies...

OKUMA 17120038 & 17120081* WORM SHAFT *Worm shaft numbers 17120038, 17120081, & 11712030-03001 are all the same part that were just assigned a different production number.  This worm shaft will not fit in the...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 17200005 DRIVE GEAR SHAFT...

OKUMA 17200006 DRIVE GEAR SHAFT BUSHING (11720006-06001) *This drive gear shaft bushing has an overall length of .563" (@ 9/16" or 14...

OKUMA 18000015 CLUTCH CAM (11800004-12003) *Please note that product may arrive in an anodized black or gray finish as shown in photographs. CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS,...

OKUMA 18010007 & 18010012* CLUTCH SPRING (11801005-06001) AVENGER AV-300L CATALINA 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da CLASSIC PRO CLX (XT)...

OKUMA 18020106 CLUTCH BAR ASSEMBLY (1180201304927) CLARION CLR-453L, 453LS, 454D, 553L, & 553LS CONTOURA CR-453CS, 553, &...

OKUMA 09301058 CLUTCH BAR SCREW (0331042-01) CLARION CLR-203L, 204D, 303L, 304D, 453L, 453LS, 454D, 553L, & 553LS COLD WATER CW-153D, 153DLX, 153DLXm, 203D, 203D-LE, 203DLX, 203DLX-LE, 203DLXm, 303D, 303DS,...

OKUMA 18040008* &18040015 CLUTCH CAM SLIDER (011804008-06001) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 305Da, & 455Da CEDROS CSD-10, 10S, 12S, & 15S CLARION CLR-303L,...

OKUMA 18050004 PINION GEAR YOKE (11805004-06001) *On some parts diagrams this may also be referred to as the "clutch yoke". BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D,...

OKUMA 18060004 YOKE SPRING (1180600102)

OKUMA 18070001 & 18070002* YOKE BRAKE PLATE *Part numbers 18070001, 18070002, 11807001-06001, & 11807001-06001 are all the same part that were just assigned different production numbers...

OKUMA 19100093 DEPTH COUNTER CATALINA CT-455Da CLARION CLR-454D CONVECTOR CV-45D &...

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19000002 WORM SHAFT TRANSMISSION GEAR 'E' RETAINER (11900002-06) This is the very small 'E' retainer located at the end of the worm shaft on the counter side that secures the small conical plastic gear that...

OKUMA 0910429 TROLLING SPOOL CONTROL (TSC) ONE WAY BALL BEARING (01100806-06) CATALINA CT-205Da, 305Da & 455Da CLARION CLR-204D, 304D, &...

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic transmission gear (#706) in...

OKUMA 0910080, 0910152, 0910153, 0910694, & 0910695* ONE WAY BALL BEARING *Ball bearing numbers  0910080, 0910152, 0910153, 0910694, 0110160901, 01101609-6, & 01101609-61 are all the same part...

OKUMA 0920126 WASHER (026.05x9x0...

OKUMA 0930598 SCREW (03224x2.6x11-61 034) This is the smallest of the six handle side plate screws...

OKUMA 0920108 WASHER (025.1x10...

OKUMA 0930663 BEARING HOLD / ROTOR NUT LOCK SCREW (033272.6x4.5-61) On conventional star drag reels- This the screw that secures the ball bearing #0910227 to the clicker side plate. On spinning...

OKUMA 0920315 WASHER (027x8x0...

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the washer that generally resides on the worm shaft between the worm shaft bushing & 'E' clip on the handle side of the reel...

OKUMA 0920435 WASHER (025.1x11.5x0.2-61) This is the washer that resides between the base of the drive gear shaft & the bronze hold plate bushing...

OKUMA 0930501 SPOOL CLICK GEAR SCREW (03212x5-617) This is the small screw that attaches the spool click gear to the actual spool itself. Two are required...

OKUMA 0930062 & 09301491* (03122x8-62) On star drag line counter reels: This is the smallest (black) screw of the three screws that secure the counter cover to the handle side plate. On spinning reels: This...

OKUMA 0930928 SCREW...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930585 SCREW (03723x11.5-61) This is the Screw that secures the Handle Side Plate to the Main Body Assembly...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0930194, 0930195, & 0930609* SCREW *Screw numbers 0930194, 0930195, 0930609, 03312X5-617 & 03312X3.5-61 are all the same part that were just assigned a different production number...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920133 CLEAR HANDLE WASHER (026x13x0...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...