Si-40

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA 26001575 & 26001586 DRAG KNOB ASSEMBLY (1260006601P10) SALINA II SA II-3000, 4000, 5000, 5000a, 8000a, & 8000S STINSON Si-30, 30a, 40, 40a, 40S, 55, 55a, & 55S STRATUS SB-30, 40, &...

OKUMA 25130390 & 25130392 HANDLE SCREW CAP  *Please note that part numbers 25130242, 25130244, 25130390, 25130392, 12504006-01001, & 12513019-0A915 are all the same part that were just assigned a...

OKUMA 21180010 MAIN BODY RAMP (121181101) DIABLO D-30 & 40 ENTROPY ET III 2000 & 3000 EQUINOX EQ-20 & 30 IGNITE iT-30 & 40 PISCES-2000 & 3000 STINSON Si-30, 30a, 40, 40a, &...

OKUMA 23041774 BAIL ARM COVER (12304084-0A003) ALUMINA AL-40 & 40S DIABLO D-40 ENTROPY ET III-3000 IGNITE IT-40 PISCES 3000 STINSON Si-40, 40a, &...

OKUMA 23050072 KICK LEVER (12305074-05001) ALUMINA AL-40 & 40S DIABLO D-40 ENTROPY ET III-3000 HARDSTONE HS-40 INSPIRA iA-40 IGNITE iT-40 PISCES 3000 STINSON Si-40, 40a, &...

OKUMA 23090001 BAIL ARM SLIDER (12309001-01) *This part is also referred to as the "Bail Arm Support Pin" or Bail Arm Yoke". *** If the Bail Arm Slider does not look like the one in the photos, just click...

OKUMA 23100021 & 23100022 COMPRESSION SPRING *Spring numbers 23100021, 23100022, 12310017-06002, & 12310017-06003 are all the same part that were just assigned a different production number...

OKUMA 23130682, 23130779, & 23134071 BAIL WIRE *Bail Wire numbers 23130682, 23130779, 23134071, 1231311406002, & 1231311406002D are all the same part that were just assigned a different production number...

OKUMA 23150022 LINE ROLLER...

OKUMA 23170010 & 23170011 LINE ROLLER WASHER (12317010-01003...

OKUMA 23170008 LINE ROLLER WASHER...

OKUMA 23180012 12mm REVERSE THREAD ROTOR NUT...

OKUMA 23260096 BAIL ARM DECORATION (1231309506001) ALUMINA AL-30, 40, & 40S ENTROPY III ET III 2000 & 3000 IGNITE iT-30 & 40 STINSON Si-30, 30a, 40, 40a, & 40S PISCES 2000 &...

OKUMA 23250003 BAIL SCREW (12325001-063) AXEON AXS-60 & 60a EPIXOR EF-15 ENTROPY ET III 1000, 2000, 3000, 4000, & 5000  CALIFORNIAN TCP-15 EQUINOX EQ-20, 30, 40, 45, & 55 INSPIRA iS-15 IGNITE...

OKUMA 24050031 DRAG WASHER RETAINER (12405024-06001)

OKUMA 24070007 & 24070008 EXTENDED SPRING *Spring numbers 24070007, 24070008, 12407006-163, & 12407006-164 are all the same part that were assigned a different production number...

OKUMA 24120022 SPOOL...

OKUMA 26120054 KEY WASHER...

OKUMA 27000255, 27000256, 27000320, & 27000322* DRIVE GEAR *Drive Gear numbers 27000255, 27000256, 27000320, 27000322, 1270008504, 12700087-02001A, 12700087-02002, & 12700087-02003 are all...

OKUMA 27020325 PINION GEAR (1270213002) DIABLO D-30 & 40 IGNITE iT-30 & 40 ENTROPY ET III 2000 & 3000 EQUINOX EQ-20 & 30 HARDSTONE HS-30 & 40 PISCES 2000 & 3000 STINSON Si-30, 30a, 40, &...

OKUMA 27080059 OSCILLATING SLIDER (12708068-02001) EQUINOX EQ-20 & 30 IGNITE iT-30 & 40  STINSON Si-30 &...

OKUMA 27050049, 27050050, & 27050051 TRANSMISSION GEAR *Transmission Gear numbers 27050049, 27050050, 27050051, 12705041-02001, 12705041-02001A, & 12705041-02002 are all the same...

OKUMA 27180425 MAIN SHAFT (12718152-06001) ALUMINA AL-40 & 40S AVEON AE-40 DIABLO D-40 ENTROPY III 3000 HARDSTONE HS-40 INSPIRA iA-40 STINSON Si-40 & 40a V SYSTEM V-40, 40a, 40S &...

OKUMA 27190025 & 27190026 CLICK GEAR (12719020-06001) Click Gear numbers 27190025, 27190026, & 12719020-06001 are all the same part that was just assigned a different production number...

OKUMA 27220010 CLICK GEAR WASHER (12722008-01003) This is the small black or clear Teflon washer that resides on the main shaft (#718) between the spool click gear (#719) & the actual spool itself (#400). In some cases...

OKUMA 27220009 CLICK GEAR WASHER (12722008-01002) This is the small black or clear Teflon washer that resides on the main shaft (#718) between the spool click gear (#719) & the actual spool itself (#400). In some cases...

OKUMA 27220037 CLICK GEAR WASHER (1272202301) This is the small steel washer that resides halfway down the Main Shaft #718 just below the Spool Click Gear #719...

OKUMA 27330005 LINE GUIDE SUPPORT BAR (12733004-06001) ALUMINA AL-15, 20, 30, 40, & 40S  AVEON AE-15, 20, 30, & 40 ENTROPY ET III-3000 EQUINOX EQ-20 & 30 HARDSTONE HS-15, 20, 30, & 40 INSPIRA...

OKUMA 28000242 ANTI-REVERSE LEVER (12800063-01003) ALUMINA AL-30, 40, & 40S APOLLO AP-30 & 40 AVENGER AV-30a, 35b, 40a, 40b, 40b-LE, 40-WH, 4000, & 4000-LE AVENGER BAITFEEDER ABF-40b AVEON...

OKUMA 28000295 ANTI REVERSE LEVER (12800085-01001) ENTROPY ET III 2000 & 3000 HARDSTONE HS-30 & 40 IGNITE iT-30 & 40 PISCES 2000 & 3000 STINSON Si-30, 30a, 40, 40a, &...

OKUMA 28010022 & 28010023 ANTI-RE LEVER SPRING *A/R Spring numbers 28010022, 28010023, 12801020-06, & 12801021-06 are all the same part that were just assigned a different number...

OKUMA 29030001 HANDLE SPRING WASHER...

OKUMA 0910070 & 92010008 BALL BEARING (010717-582) *One Way Ball Bearing numbers 0910070, 010717-582, & 92010008 are all the same part that were just assigned a different production number. **If you are...

OKUMA 0930538 BAIL ARM COVER SCREW (03221.6x4...

OKUMA 0930044 SIDE PLATE SCREW (03122...

OKUMA 0930643 SCREW (03325.92.66.561) On Conventional Star Drag Reels: This screw would be used to secure the hold plate to the main side plate. On Spinning Reels: This screw would be used to secure the...

OKUMA 0930680 BAIL ARM & BAIL HOLDER SCREW (03328.52...

OKUMA 0920180 & 0920355 CLEAR WASHER (02036.201) This is a multi purpose screw that is used on the screw that secures the bail wire to the bail arm on smaller reels & is also used on the screws that secure the...

OKUMA 0910071 ONE WAY BALL BEARING...

OKUMA 0930058 SCREW (03322.6X8-61) On conventional star drag reels this is the screw that secures the vice side plate to the main body. On spinning reels this is the screw that secures either the end cap or side plate...

OKUMA 0910049, 0910050, 0910051*, 0910053, 0910054, 0910263, & 0910326 BALL BEARING *Ball Bearing numbers 0910049, 0910050, 0910051, 0910053, 0910054, 0910263, 0910326, 01071405-5, 01071405-6, 01071405-51,...

OKUMA 0910091, 0910093*, 0910272, 0910273, 0910274, 0910278, 0910361, 6K582201, 92010015, & 92010016 BALL BEARING Inner Dia. 8mm  Outer Dia. 14mm  Thickness 4mm *Ball Bearing numbers...

OKUMA 0910039, 0910041*, 0910253, 0910254,  0910255, 0910256, & 0910381 BALL BEARING *Ball Bearing numbers 0910039, 0910041, 0910253, 0910254, 0910255, 0910256, 0910381, 01071103-5, 01071103-51, 01071103-61,...

OKUMA 0930301 SCREW *Screw numbers 0930301, 0930770. & 03422.6x8-64 are all the same part that were assigned different production numbers over the years...

OKUMA 0930471 OSCILATING SLIDER SCREW  (03212.3x5.5-61) This is the screw that secures the main shaft to the oscillating slider...

OKUMA 0920246 WASHER (023.5x6x0...

OKUMA 0920324 DRIVE GEAR WASHER (028.1x12x0.05-3) This is one of usually two washers that are located on the backside of the drive gear...

OKUMA 0910013, 0910015*, 0910016, 0910017, 0910018, 0910232, 0910234, 0910382, 92010017, 6K304001, & 6K304004 BALL BEARING *Ball Bearing numbers 0910013, 0910015, 0910016, 0910017, 0910018,...

OKUMA 0930237 SCREW (03412.6X7...

OKUMA 0930575 SCREW (03222X4.5-61) ON CONVENTIONAL STAR DRAG REELS- This is the screw used to secure the spool click gear to the actual spool itself. two are required for this application. ON SPINNING REELS- This is...