XPD-30D

DAIWA HB-1 PRECISION REEL OILER (64110100) Handy one drop lube in a convenient tube with a pocket clip and fits perfectly in your tackle...

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA CLASSIC PRO XP & XPD SERIES CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Classic Pro XP or XPD series reel in only minutes by adding a new...

OKUMA CLASSIC PRO CAST CONTROL CAP 16000093 CLASSIC PRO CLX XT CLX-300L, 300La, 302L, 302La, 450L, 450La, 452L, & 452La CLASSIC PRO XP XP-302L, 302La, 452L, & 452La CLASSIC PRO...

OKUMA 16000038 CAST CONTROL CAP (11600014-03001) This cast control cap is for right hand retrieve reels only & will not work on any DLX or LX left hand retrieve reels. For that application click here. Also, this...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL If you need a line guide pawl for any Okuma 15, 20, 25, 30, or 45 size level wind reel, this O.E.M. part is it & If your unsure, just...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT 8mm

OKUMA 11170010, 11170012*, & 41170001 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different...

OKUMA 12010001, 12010057, & 12010089 ANTI REVERSE PAWL (11201001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, 300C, 300L, 300LX, 300LXAG, 302C, 302L, 302LX,...

OKUMA 12070097 HOLD PLATE AVENGER AV-300L CLASSIC PRO CL-300L & 302L CLASSIC PRO LINE COUNTER XPD-30D & 30Da MAGDA PRO MA-30D, 30DT, 30DX, & 30DXT MAGDA PRO XPD MA-30XPD, XPD-30D, &...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12110008 & 12110034 ANTI REVERSE PAWL PIN (11211002-03001) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C,...

OKUMA 12150029 HOLD PLATE BUSHING (11215031-0115) This is the small white or black bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12150030 HOLD PLATE BUSHING (11215031-0114) This is the white bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12160001, 12160002, 12160010, & 12160018* ANTI REVERSE PAWL SPRING *Part numbers 12160001, 12160002, 12160010, 12160018, 11216001-06, & 11216001-06001 are all the same part that...

OKUMA 15160001 & 15160002* HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different...

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This drive gear shaft bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 13030040, 13030041, & 13030083 GOLD ANODIZED CLICK BUTTON *Click button numbers 13030040, 13030041, 13030083, 11303004-03914, & 11303004-03929 are all the same part that were just...

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050002 & 13050007* CLICK PAWL SPRING (PLASTIC) *Click pawl spring numbers 13050002, 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different...

OKUMA 13050003, 13050006, 13050012, & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been...

OKUMA 14000743 SPOOL ASSEMBLY (1140003304928) CLASSIC PRO XP-302L CLASSIC PRO LINE COUNTER XPD-30D MAGDA PRO XPD...

OKUMA 14010002 & 14010026* SPOOL CLICK GEAR  *Spool click gear numbers 14010002, 14010026, 1140101101, 11401001-05001, & 11401001-05002 are all the same part that were just assigned a...

OKUMA 16090002, 16090003, 16090004*, & 16090009 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the...

OKUMA 16110005 & 16110006 EARED...

OKUMA 16120027 KEY...

OKUMA 16120029 KEY...

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the spring washer that prevents any binding issues between the star drag knob & the handle arm itself. *Washer numbers 16140001,...

OKUMA 16150021 STAR DRAG (11615005-01001) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, 452L, 552, & 552W CLASSIC PRO XT CLX-300L, 300La, 302L, 302La,...

OKUMA 13020014 & 13020015 WASHER (11302002-06001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17000026, 17000199, & 17000200* DRIVE GEAR  Drive gear numbers 17000199, 17000200, 11700006-032, 11700006-03002, & 1170000603002 are all the same part that were just assigned different production...

OKUMA 17010077 & 17010078 DRIVE GEAR SHAFT Drive gear shaft numbers 1701077, 17010078, & 1170101603001A are all the same part, that were just assigned a different number which has an overall length of @ 1...

OKUMA 17020023, 17020322, & 17020237 PINION GEAR *Pinion gear numbers 17020023, 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part,...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XT...

OKUMA 17040008 LINE GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XPD LINE COUNTER XPD-30D, 30Da, 30DLX, 30DLXa,...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel transmission gear that resides on the end of the spool shaft on the clicker side of the reel that is secured be 'C' retainer #19000001. AURORA...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17080003 TRANSMISSION GEAR (11708003-11) This is the small "conical" transmission gear that is located on the drive side of depth counter equipped reels mounts to the end of the worm shaft secured by a small...

OKUMA  17100045* & 17100046 LINE GUIDE ASSEMBLY This line guide assembly is now the replacement or upgrade for numbers 17100045, 17100046, 1171001306917, & 1171001306002. *Please note that in some...

OKUMA 17120023 WORM SHAFT (11712014-03) CLASSIC PRO LINE COUNTER XPD-30D & 30Da CONVECTOR CN-30D DIEZEL DZ-30D MAGDA PRO MA-30D & 30DX MAGDA PRO XPD SERIES MA-30XPD, XPD-30D, &...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 18000005 & 18000008* CLUTCH CAM Clutch cam numbers 18000005, 18000008, 11800002-02002, & 11800002-12002 are all the same part, that were just assigned a different production number which is also...

OKUMA 18010001 CLUTCH SPRING (11801001-06) AURORA CLASSIC CL-20L, 30L, & 45L CATALINA CT-55C, 55N, & 55W CLARION CLR-553L & 553LS CLASSIC PRO CL-150, 200C, 200L, 202, 202C, 202L, 300, 300C,...

OKUMA 18020038 CLUTCH BAR *Clutch bar numbers 18020038, 11802005-01, & 11802005-01X are all the same part that were just assigned a different production number. CLASSIC PRO LINE COUNTER XPD-20D, 20Da,...

OKUMA 18040001 CLUTCH CAM SLIDER (11804001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L, 302LX, 450, 450C, 450L, 452, 452C, & 452L CLASSIC...

OKUMA 18050001 PINION GEAR YOKE (11805001-06) *On some parts diagrams this may also be referred to as the "clutch yoke". AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L,...

OKUMA 18060001, 18060002, & 18060003* YOKE SPRING *Yoke spring numbers 18060001, 18060002, 18060003, 11806001-06, & 11806001-061 are all the same part that were just assigned a different...

OKUMA 19100004, 19100028, 19100072, & 19100100* DEPTH COUNTER *Depth Counter numbers 19100004, 19100028, 19100072, 19100100, 11910001-01, 11910001-01003, & 1191000101003 are all the same part...

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19000002 WORM SHAFT TRANSMISSION GEAR 'E' RETAINER (11900002-06) This is the very small 'E' retainer located at the end of the worm shaft on the counter side that secures the small conical plastic gear that...

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic transmission gear (#706) in...

OKUMA 0910365 BALL BEARING Inner DIA. 8mm  16mm Outer DIA. 16mm  Thickness...

OKUMA 0920151* & 0920317 DRIVE GEAR WASHER

OKUMA 0920126 WASHER (026.05x9x0...

OKUMA 0920108 WASHER (025.1x10...

OKUMA 0920166 DRIVE GEAR SHAFT...

OKUMA 0920315 WASHER (027x8x0...

OKUMA 0920283 WASHER (025.1x8x0.5-6) *On star drag reels: this is the washer that resides between the base of the drive gear shaft & the bronze hold plate bushing. *On lever drag reels: this is the washer that resides...

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the washer that generally resides on the worm shaft between the worm shaft bushing & 'E' clip on the handle side of the reel...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930589 SCREW...

OKUMA 0930734 GOLD ANODIZED CLUTCH BAR SCREW...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0930219 CLICK PAWL SPRING & HOLD PLATE MOUNTING SCREW (03327.5x2...

OKUMA 0910096, 0910097, 0910099*, 0910103, 0910104, 0910280, & 0910327 BALL BEARING *Ball bearing numbers 0910096, 0910097,  0910099, 0910103, 0910104, 0910280, 0910327, 01081605-5, 01081605-6,...

OKUMA 0920157 WASHER (028.1x12x0.8-6)

OKUMA 0930194, 0930195, & 0930609* SCREW *Screw numbers 0930194, 0930195, 0930609, 03312X5-617 & 03312X3.5-61 are all the same part that were just assigned a different production number...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930196 CLICK BUTTON SCREW (03312x5-61) This is the screw that secures the click pawl to the click button. If you intend to use this screw or if your schematics call for use of this screw as a slider screw, your...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...