MS-45LS

DAIWA HB-1 PRECISION REEL OILER (64110100) Handy one drop lube in a convenient tube with a pocket clip and fits perfectly in your tackle...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA PA1115 REEL OIL 0.35 OZ.

OKUMA MAG SYSTEM MS-25CS, 25LS, 30CS, 30LS, 45CS, & 45LS CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Mag System series reel in only minutes by adding...

OKUMA 16000053 & 16000083* CAST CONTROL CAP *Cast control cap numbers 16000053, 16000083, 11600016-03001, & 11600025-0401 are now all the same part with an improved design. CATALINA CT-15C, 15D, 15L,...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA 15000236*, 15000247, 15000264, 15000274, & 15000289 POWER HANDLE ASSEMBLY *Handle numbers 15000236, 15000247, 15000264, 15000275, 15000289, 1150002404005, 1150002801927B, & 1150002404006C are all the...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma rod brace clamp & hardware kit...

OKUMA 11050006 WORM SHAFT BUSHING (11105003-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11020030 & 11020046 BODY FOOT (11102008-06002 & 11102010-06002) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da MAG SYSTEM MS-25CS, 25LS, 30CS, 30LS,...

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT 8mm

OKUMA 11170011* & 11170017 HANDLE RETAINER NUT *Handle retainer nut numbers 11170011, 11170017, & 11117007-03001 are all the same part, just assigned a different production number. CATALINA CT-15C,...

OKUMA 12010013 ANTI-RE PAWL (11201013-06001) BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, & 45L CONVECTOR CN CN-30CS CONVECTOR CV...

OKUMA 29010001 WASHER (12901001-06) This is also referred to as a "push nut" or "press on retainer"...

OKUMA 12070059 & 12070063 HOLD PLATE *Hold plate numbers 12070059, 12070063, 11207024-06001, & 11207028-06001 are all the same part that were just assigned a different production number. CATALINA 45C,...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12240004 & 12240017 ONE WAY BEARING CUP...

OKUMA 12110002 & 12110006* ANTI REVERSE PAWL PIN *Part numbers 12110002, 12110006, 11211002-03001, 11211002-03, & 11211005-03001 are all the same part that were just assigned a different...

OKUMA 16040002 & 16040003 DRAG CLICK *Control click numbers 16040002, 16040003, 1604002-01001, & 1604003-01001 are all the same part, that were just assigned a different production number. CATALINA CT-15C,...

OKUMA 15130015 & 15130017 HANDLE COVER * Handle cover numbers 15130015, 15130017, & 11513010-01001 are all the same part, that were just assigned a different production number. CATALINA (First...

OKUMA 12160006*, 12160007, & 12160011 ANTI REVERSE PAWL & CLICK SPRING *Spring numbers 12160006, 12160007, 12160011, & 1121600401 are all the same part that were just assigned a different...

OKUMA 12160004 ANTI-RE PAWL SPRING *Spring numbers 12160004, 11216001-06, & 11216001-06002 are all the same part that were just assigned a different production number. CATALINA CT-15C, 15D, 15L, 20C,...

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 13030052 CLICK BUTTON (1130301301) CLARION CLR303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS MAG SYSTEM MS-25CS, 25LS, 30CS, 30LS, 45CS, &...

OKUMA 13040011 CLICK PAWL (1130401301) CLARION CLR-203L, 303L, 453L, & 453LS CONTOURA CR-203CS. 303CS, & 453CS CORTEZ CZ-5CS, 5CSa, 10CS, 10CSa, 12CS, & 12CSa MAGNETIX  MG-15CS,...

OKUMA 13040013 CLICK PAWL (1130401201) CATALINA CT-305Da CLARION CLR303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS MAGNETICS MG-30CS, 30LS, 45CS, & 45LS MAG SYSTEM MS-15CS, 15LS, 20CS, 20LS,...

OKUMA 13040012 CLICK PAWL SPRING (11304009-06001) CATALINA CT-15C, 15D, 15L, 20C, 20D, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 55C, 55N, & 55W CHROMER CR-250, 250LX, 400, & 400LX FINA Fi-150,...

OKUMA 13050009 CLICK PAWL SPRING (1130500301) CATALINA CT-305Da & 455Da CEDROS CSD-10, 10S, 12, 12S, & 15S CLARION CLR-303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS CORTEZ CZ-10CS,...

OKUMA 14010029 CLICK GEAR CLARION CLR-453L & 453LS CONTOURA CR-453CS MAG SYSTEM MS-45CS & 45LS MAGNETICS MG-45CS &...

OKUMA 14010002 & 14010026* SPOOL CLICK GEAR *Please note that this part may arrive in either white or black molded plastic. **Spool click gear numbers 14010002, 14010026, 1140101101,...

OKUMA 15150001 & 15150002* HANDLE NUT LOCK SCREW *Screw number 15150001, 15150002, 11515001-03907, & 11515001-06001 are all the same part that was just assigned a different production number...

OKUMA 16090002, 16090003, 16090004*, & 16090009 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the...

OKUMA 18150001 & 18150002 SCREW This is the screw that secures the clutch bar to the clutch cam. *Screw numbers 18150001, 18150002 & 11815001-16001 are all the same part that were just assigned a...

OKUMA 16110037 & 16110045 EARED WASHER (1161101201 &...

OKUMA 16120047 KEY WASHER (11612029-06001) This is the washer that resides on the drive shaft between the handle assembly & the black plastic drag click. This key washer is identified as Key...

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 13020014 & 13020015 WASHER (11302002-06001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17010160 DRIVE GEAR SHAFT (1170103716001) This drive gear shaft has an approximate length of 2.322" (59mm). CATALINA (1ST GEN.) CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 55C, 55N, &...

OKUMA 17020272, 17020275, 17020276, & 17020485* STAINLESS STEEL PINION GEAR 6.2:1 *Pinion gear numbers 17020272, 17020275, 17020276, 17020485, 1170203203002, & 1170203206002 are all the same part that...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CLARION CLR-453L, 453LS, & 454D CLASSIC PRO CL-450L & 452L CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L,...

OKUMA 17040019 LINE GUIDE SUPPORT BAR (11704004-03001) AURORA CLASSIC CL-45L CATALINA CT-45D, 45L & 455Da CLARION CLR-453L, 453LS, & 454D CONVECTOR CV-45DS & 45LS MAGNETICS MG-45LS MAG SYSTEM MS-45LS MAGDA...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel transmission gear that resides on the end of the spool shaft on the clicker side of the reel that is secured be 'C' retainer #19000001. AURORA...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17100030 & 17100032* LINE GUIDE ASSEMBLY (1171001406917) *Please note that this line guide is the direct replacement / upgrade for the now discontinued #17100030 & 1171001406002 guide assemblies...

OKUMA 17120053 WORM SHAFT (1171203901) *Please note that on some parts diagrams for the MG-30LS this is listed as the replacement Worm Shaft. This will not fit as it is to large. Click here for the correct part...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 17200003 DRIVE GEAR SHAFT BUSHING (11720003-06001) *This drive gear shaft bushing has an overall length of .409" (just a hair under 7/16" or 10...

OKUMA 18000012 & 18000014* CLUTCH CAM / CLUTCH SHAFT Clutch cam numbers 18000012, 18000014, 11800004-02002, & 11800004-12002 are all the same part, that were just assigned a different production...

OKUMA 18010007 & 18010012* CLUTCH SPRING (11801005-06001) AVENGER AV-300L CATALINA 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da CLASSIC PRO CLX (XT)...

OKUMA 18020076 & 18020080 CLUTCH BAR ASSEMBLY Clutch bar numbers 18020076, 18020080, 1180201206001, & 1180201206001 are now all the same part. CATALINA CT-25C, 25CS, 30C, 30CS, 30D, 30L, 45C, 45D, &...

OKUMA 18040008* &18040015 CLUTCH CAM SLIDER (011804008-06001) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 305Da, & 455Da CEDROS CSD-10, 10S, 12S, & 15S CLARION CLR-303L,...

OKUMA 18050004 PINION GEAR YOKE (11805004-06001) *On some parts diagrams this may also be referred to as the "clutch yoke". BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D,...

OKUMA 18060004 YOKE SPRING (1180600102)

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic transmission gear (#706) in...

OKUMA 0910080, 0910152, 0910153, 0910694, & 0910695* ONE WAY BALL BEARING *Ball bearing numbers  0910080, 0910152, 0910153, 0910694, 0110160901, 01101609-6, & 01101609-61 are all the same part...

OKUMA 0930963 REEL FOOT SCREW...

OKUMA 0920108 WASHER (025.1x10...

OKUMA 0930171 SCREW (03222.6X4.5-61) On conventional star drag reels this screw is used to secure the one way bearing cup to the handle side plate. On spinning reels this screw is used to secure the transmission...

OKUMA 0930626 SCREW...

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the washer that generally resides on the worm shaft between the worm shaft bushing & 'E' clip on the handle side of the reel...

OKUMA 0920162 WASHER (028x10x0...

OKUMA 0920111 WASHER (025.1x11.5x.5-6) This is the washer that generally resides between the yoke brake plate & the hold plate bushing...

OKUMA 0920373 WASHER (023x8x0...

OKUMA 0930566 SCREW (03222...

OKUMA 0930501 SPOOL CLICK GEAR SCREW (03212x5-617) This is the small screw that attaches the spool click gear to the actual spool itself. Two are required...

OKUMA 0930928 SCREW...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930176 SCREW (03222.6x9...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0910096, 0910097, 0910099*, 0910103, 0910104, 0910280, & 0910327 BALL BEARING *Ball bearing numbers 0910096, 0910097,  0910099, 0910103, 0910104, 0910280, 0910327, 01081605-5, 01081605-6,...

OKUMA 0930194, 0930195, & 0930609* SCREW *Screw numbers 0930194, 0930195, 0930609, 03312X5-617 & 03312X3.5-61 are all the same part that were just assigned a different production number...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920133 CLEAR HANDLE WASHER (026x13x0...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...

OKUMA 46010002 COMPRESSION SPRING (14601001-16) CATALINA CT-15C, 15D, 15L, 20C, 20D, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 55C, 55N, & 55W CHROMER CR-250, 250LX, 400, &...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...