STAR DRAG SD SERIES

Rotary Tool Buffing Wheel 15/16" MC13 180 grit Scotch BriteTM abrasive.Check out the photos... You don't want to rebuild without...

Rotary Tool Buffing Wheel 15/16" MC13 240 grit Scotch BriteTM abrasive.Check out the photos... You don't want to rebuild without...

OKUMA STAR DRAG SD-55 SERIES CARBON FIBER DRAG WASHER SET BY DRAGMASTERSTM Drastically increase the performance potential of any Okuma Star Drag SD-55 series reel in only minutes by adding a new set...

CARBON FIBER DRAG WASHER SET FOR OKUMA SEA DEMON (SDO) & STAR DRAG (SD) 20 THRU 45 SERIES REELS BY DRAGMASTERSTM Drastically increase the performance potential of any Okuma Sea Demon (SDO) & Star Drag (SD) 20 thru...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERSTM 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERSTM 8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

OKUMA 16000055 CAST CONTROL CAP KIT & SHIM KIT The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Cast Control Cap Kit uses only genuine Okuma O.E.M...

OKUMA 16000052 CAST CONTROL CAP & SHIM KIT (11600015-03003) The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Cast Control Cap Kit that is...

OKUMA 16000040 CAST CONTROL CAP The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Cast Control Cap Kit uses only genuine Okuma parts that was designed to ensure a...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp &...

OKUMA 11140005 ROD BRACE CLAMP & HARDWARE KIT The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp & Hardware Kit uses only...

OKUMA 17150009 LINE GUIDE PAWL If you need a Line Guide Pawl for any Okuma 15, 20, 25, 30, or 45 Size level wind reel, this O.E.M. part is it & If your unsure, just check out the list below! Line...

OKUMA 17150001 LINE GUIDE PAWL (11715002-06) CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN-55L CONVECTOR CV-55L & 55LS STAR DRAG SD-55L SOLTERRA SLR-50L TITUS T-20L &...

OKUMA 0.25 OZ. REEL OIL

OKUMA 11050006 (11105003-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 (11105004-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11050009 WORM SHAFT BUSHING CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN-55L CONVECTOR CV-55L & 55LS STAR DRAG SD-55L SOLTERRA SLR-50L TITUS T-20L &...

OKUMA 11070021 LINE GUARD (11107018-06001) This is the steel bar with internal threads that is located inside the top of the Main Body Assembly that secures the Left Side & Right Side Hangers (#108 & #108-1) with...

OKUMA 11080014 HANGER...

OKUMA 11140005 ROD BRACE CLAMP This Brace itself will fit reel seats with mounting hole dimensions from @ 1 9/16" to 1 11/16" (@ 41mm to 43mm) (@ 32mm to 35mm) and does not include any hardware. If you need the...

OKUMA 11140037 ROD BRACE CLAMP This Brace itself will fit reel seats with mounting hole dimensions from @ 1 1/4" to 1 3/8" (@ 32mm to 35mm) and does not include any hardware. If you need the complete kit with...

OKUMA 11150003 ROD BRACE CLAMP BOLT FLAT HEAD

OKUMA 11150003 ROD BRACE CLAMP BOLT ROUND HEAD

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11160003 ROD BRACE CLAMP NUT SHORT...

OKUMA 11170002 ROD BRACE CLAMP NUT

OKUMA 11170010 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different production number over the years...

OKUMA 11170013 10mm HANDLE NUT (11117005-03002) This nut has a reverse thread & will only work on left hand retrieve model reels only. If you need a standard thread nut, please click here...

OKUMA 12010001 ANTI REVERSE PAWL...

OKUMA  12010011 ANTI REVERSE PAWL (11201008-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200C, 202, 202C, & 202L CLASSIC PRO CLX (XT) CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L & 202La...

OKUMA 12010018 ANTI REVERSE PAWL...

OKUMA 12070044 & 12070048 BRASS HOLD PLATE AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450C, 450L ,452, 452C, & 452L (FIRST GEN.) CONVECTOR CN-45C, 45D, & 45L DIEZEL DZ-45C & 45L MAGDA MA45D &...

OKUMA 12070046 HOLD PLATE (11207011-03001) AVENGER AV-300L (1st Generation) AURORA CLASSIC CL-30L CLASSIC PRO CL-300, 300C, 300L, 302C, & 302L (1st Generation) CONVECTOR CN-30C, 30D, & 30L DIEZEL DZ-30D &...

OKUMA 12070052 HOLD PLATE (11207017-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, & 20L DIEZEL DZ-20D & 20L SEARAY SR-20L  STAR...

OKUMA 12070056 STAINLESS STEEL HOLD PLATE...

OKUMA 12080036 SIDE PLATE COVER AVENGER AV-300L STAR DRAG SD-30C &...

OKUMA 12110008 ANTI REVERSE PAWL PIN...

OKUMA 12110009 ANTI REVERSE PAWL PIN...

OKUMA 12120009 DEPTH COUNTER COVER *Counter Cover numbers 12120009, 12120038, 1121200101, 1121200101X, & 11212003-01001 are all the same part that were just assigned a different number over the years...

OKUMA 12150013 HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production number over the years...

OKUMA 12160001 ANTI REVERSE PAWL SPRING *Part numbers 12160002, 11216001-06, & 11216001-06001 are all the same part that were just assigned a different number over the years...

OKUMA 12160003 ANTI-RE PAWL SPRING...

OKUMA 12160004 ANTI-RE PAWL SPRING *Spring numbers 12160004, 11216001-06, & 11216001-06002 are all the same part that were just assigned a different production number...

OKUMA 13020014 WASHER / SPACER *Spacer numbers 13020014, 13020015, 11302002-03, 11302002-06001, & 11302002-03002 are all the same part that were just assigned a different production number that may arrive in...

OKUMA 13030040 GOLD ANODIZED CLICK BUTTON *Click Button numbers 13030040, 13030041, 13030083, 11303004-03914, & 11303004-03929 are all the same part that were just assigned a different production...

OKUMA 13030046 & 13030082 CLICK BUTTON STAR DRAG SD SD-20D & 20L STRATAMASTER SM15D &...

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050003, 13050012, & 13050015 CLICK SPRING (1130500201) *Please note that the stainless steel version of this Click Spring has been discontinue & has been replaced with this copper version which works...

OKUMA 13050007 CLICK PAWL SPRING (PLASTIC) *Click Pawl Spring numbers 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different number over the years that may arrive...

OKUMA 13110021 SIDE PLATE COVER AVENGER AV-300L DIEZEL DZ-30D & 30L STAR DRAG SD-30C, 30D, &...

OKUMA 14010026 SPOOL CLICK GEAR  *Spool Click Gear numbers 14010026, 1140101101, & 11401001-05002 are all the same part that were just assigned a different production number over the years...

OKUMA 15000119 HANDLE ASSEMBLY (1150000604004A) DIEZEL DZ-30D, 30L, 45C, & 45L STAR DRAG SD-30C, 30D, 30L, 30LX, 45C, 45D, &...

OKUMA 15160002 HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different number which is also referred to...

OKUMA DRAG SPRING WASHER PAIR *Drag Spring Washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the same part that were just assigned a...

OKUMA 16110005 EARED WASHER  *Eared Washer numbers 16110005, 16110006, & 11611005-06 are all the same part that were just assigned a different production number...

OKUMA 16110040 METAL EARED WASHER This is the metal "Eared Drag Washer or "Drag Plate" that is always located in the middle of the drag sequence as shown in the photo below. Washer numbers...

OKUMA 16120027 KEY...

OKUMA 16120029 KEY...

OKUMA 16120045 DOMED KEY WASHER (11612026-06001) This is the Domed metal "Keyed Drag Washer or "Drag Plate" that is always located on the very top of the drag sequence as shown in the...

OKUMA 16140003 DRAG SPRING WASHER This is the Spring Washer that prevents any binding issues between the Star Drag Knob & the Handle arm itself. *Washer numbers 16140001, 16140003, 11614001-06,...

OKUMA 16150009 STAR DRAG KNOB (11615003-01001) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L, CLASSIC PRO CLX-150La, 200L, & 200La, CLASSIC PRO XT XP-202L, & 202La DIEZEL DZ DZ-20D...

OKUMA 16150021 STAR DRAG (11615005-01001) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, 452L, 552, & 552W CLASSIC PRO CLX (XT) CLX-300L, 300La, 302L,...

OKUMA 16150022 STAR DRAG *Star Drag numbers 16150022, 16150041, & 116150005-01001A are all the same part that were just assigned a different production number. This Star Drag Knob has reverse thread & is for left...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This Drive Gear Shaft Bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 16170013 DRIVE GEAR SHAFT BUSHING (11617012-03001)*This Drive Gear Shaft Bushing has an overall length of .2590" (just a hair over 1/4" or 6...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides between the inside of the Cast Control Cap & the metal End Thrust Washer. We also include this in our Cast Control Kits...

OKUMA  17000026 DRIVE GEAR  Drive gear numbers 17000199, 17000200, 11700006-032, 11700006-03002, & 1170000603002 are all the same part that were just assigned different production numbers over the years...

OKUMA 17000027 DRIVE GEAR *Drive Gear numbers 17000027, 17000201, 17000202, 11700006-0321, 11700006-03003, & 1170000603003 are all the same part that were just assigned a different production number that will only...

OKUMA 17000205 DRIVE GEAR *Drive gear numbers 17000205, 17000210, 17000211, 1170000803006, 11700008-03002, & 11700008-03006 are all the same part that were just assigned a different number over it's...

OKUMA 17000247 STAINLESS STEEL DRIVE GEAR (1170002806002) CATALINA CT-55C & 55W CLARION CLR-553L CLASSIC PRO CL-552 & 552W CONTOURA CR-553 & 603 CONVECTOR CN / CV-55, 55L, 55SS,...

OKUMA 17000247, 17000248, & 17000312 BRASS DRIVE GEAR CATALINA CT-55C & 55W CLARION CLR-553L CLASSIC PRO CL-552 & 552W CONTOURA CR-553 & 603 CONVECTOR CN / CV-55, 55L, 55SS,...

OKUMA 17010065 DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010065, 17010068, 1170100903001, & 1170100913001 are all the same part, that were just assigned a different number which has an overall length of @ 1...

OKUMA 17010071 DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010071, 17010075, & 1170101603001 are all the same part that were just assigned a different production number that has an overall length of approx. 1...

OKUMA 17010084 DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010084, 17010086, 17010087, 17010274, 1170102003001, 1170102013001A, & 1170102013001B are all the same part, that were just assigned a different number which...

OKUMA 17010132 DRIVE GEAR SHAFT This Drive gear Shaft has an overall length of approx. 1.820" (46mm). CLASSIC PRO CL-552 & 552W DIEZEL DZ-55 STAR DRAG SD-55, 55L, &...

OKUMA 17020023 PINION GEAR *Pinion gear numbers 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part, but were just assigned...

OKUMA 17020243 PINION GEAR *Pinion gear numbers 17020243, 17120244, 11702008032, & 1170200803002 are all the same part that were just assigned a different number that will only work on left hand retrieve...

OKUMA 17020264 PINION GEAR *This is Pinion Gear numbers 1702264, 17020265, 17020266, 17020354, 11702030-06002, 11702030062, & 1170203003002.   CATALINA CT-55C & 55W CLARION...

OKUMA 17020264 PINION GEAR *This is the current stailess steel version of Pinion Gear numbers 17020264, 17020265, 17020266, 17020354, 11702030-06002, 11702030062, & 1170203003002. CATALINA CT-55C...

OKUMA 17020310 PINION GEAR (1170203603002) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L & 202La CLASSIC PRO XPD XPD-20D...

OKUMA 17030006 WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CLARION CLR-303L & 304D CLASSIC PRO CL-300, CL-300L, 300LX, 302L, & 302LX CLASSIC PRO XT CLX-300L, 300La,...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CLARION CLR-453L, 453LS, & 455D CLASSIC PRO CL-450L & 452L CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L,...

OKUMA 17030008 WORM SHAFT GUARD (11703009-03) AURORA CLASSIC CL-20L CATALINA CT-205Da, 20D, & 20L CLARION CLR-203L & 204D CLASSIC PRO CL-200L & 202L CLASSIC PRO CLX (XT) CLX-200L &...

OKUMA 17030009 WORM SHAFT GUARD (11703010-03907) CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN / CV-55L & 55LS STAR DRAG...

OKUMA 17040007 WORM GUIDE SUPPORT BAR (11704004-03907) AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450L, 452, & 452L CONVECTOR CN-45 & 45L CONVECTOR CV-45D & 45L DIEZEL DZ-45L MAGDA PRO MA-45D &...

OKUMA 17040008 WORM GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XP XPD-30D, 30Da, 30DLX, & 30DLXa CONVECTOR CN /...

OKUMA 17040010 WORM GUIDE SUPPORT BAR...

OKUMA 17040012 LINE GUIDE SUPPORT BAR *Support Bar numbers 17040012, 17040021, 11704008-03, & 11704008-03907 are all the same part that were just assigned a different production number AURORA CLASSIC...

OKUMA 17040025 LINE GUIDE SUPPORT BAR...

OKUMA 17040028 WORM GUIDE SUPPORT BAR (11704019-03001) CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN / CV-55L & 55LS  STAR DRAG...

OKUMA 17050011 WORM SHAFT TRANSMISSION GEAR (11705006-06) This is the steel Transmission Gear that resides on the end of the Worm Shaft that is located on the Clicker side of the reel. This is also referred to as the...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel Transmission Gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17050015 TRANSMISSION GEAR (11705009-32) *This is the Transmission Gear that is secured to the end of the Worm Shaft by 'E' Retainer 29000001 that is located on the clicker side of the reel. CLARION CLR-553L...

OKUMA 17050017 TRANSMISSION GEAR (11705010-06001) *On level wind equipped reels, this is the Transmission gear that resides on the Spool shaft on the clicker side of the reel that is secured with 'C' Retainer 29000006...

OKUMA 17060003 TRANSMISSION GEAR (11706002-06) *This is the small Transmission Gear that resides on the end of the spool shaft on the clicker side of the reel. This Gear may arrive in either a cast steel or brass finish...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel Transmission Gear that resides on the end of the spool axle shaft on the clicker side of the reel that is secured be 'C' retainer #19000001...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the Transmission Gear that is located on the clicker side of the reel that is secured with one Phillips Screw to the side cover & is also referred to as...

OKUMA 17070009 TRANSMISSION GEAR (11707008-11) This is the "stepped" Transmission Gear that is located under the Click Pawl Spring that is secured to the Vice Side Plate with one small Phillips screw & is also referred...

OKUMA 17070010 TRANSMISSION GEAR (11707009-06001) This is the "stepped" metal Transmission gear that is secured to the clicker side plate that drives the steel gear secured to the Worm Shaft. CLARION CLR-553L...

OKUMA 17080003 TRANSMISSION GEAR (11708003-11) This is the small "conical" Transmission Gear that is located on the drive side of Depth Counter equipped reels mounts to the end of the Worm Shaft secured by a...