CONVECTOR CN SERIES

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

Rotary Tool Buffing Wheel 15/16" MC13 180 grit Scotch BriteTM abrasive.Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA DLX & LX CAST CONTROL CAP KIT The best way to go to take all the guess work out of missing parts & way cheaper too! Important note! This Cast Control Cap Kit has a reverse thread & will only work on left...

OKUMA CONVECTOR CN-30CS SERIES CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Convector CN-30CS reel in only minutes by adding a new set of...

CARBON FIBER DRAG WASHER SET BY DRAGMASTERS   FOR OKUMA CONVECTOR CN 15 THRU 45 SERIES REELS Drastically increase the performance potential of any Okuma Convector CN series reel in only minutes by adding...

OKUMA CONVECTOR CN-55 SERIES CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Convector CN-55 series reel in only minutes by adding a new set of...

OKUMA 16000038 CAST CONTROL CAP KIT (11600014-03001) The best way to go to take all the guess work out of missing parts & way cheaper too! This updated kit consists of one each of a Cast Control Cap, Metal End Thrust...

OKUMA CAST CONTROL CAP KIT The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Cast Control Cap Kit uses only genuine Okuma O.E.M. parts to ensure a complete...

OKUMA 17150003, 17150004, 17150008, & 17150009 LINE GUIDE PAWL If you need a Line Guide Pawl for any Okuma 15, 20, 25, 30, or 45 Size level wind reel, this O.E.M. part is it & If your...

OKUMA 17150001 LINE GUIDE PAWL (11715002-06) CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN / CV-55L & 55LS STAR DRAG SD-55L SOLTERRA SLR / SLX-20 & 50L TITUS T-20L &...

OKUMA ROD BRACE CLAMP & HARDWARE KIT (LARGE) The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp & Hardware Kit uses...

OKUMA 15000212 POWER HANDLE ASSEMBLY *This Handle Assembly now replaces 15000214, 15000216, 15000219, 1150002304005, 1150002304006, & 1150002304006C. Even though this Handle Assembly was intended for use...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp &...

OKUMA 11050006 (11105003-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050009 WORM SHAFT BUSHING CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN-55L CONVECTOR CV-55L & 55LS STAR DRAG SD-55L SOLTERRA SLR-50L TITUS T-20L &...

OKUMA 11050007 (11105004-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11140036, 11140037, & 111400047 ROD & REEL BRACE / CLAMP (CLAMP ONLY) The Brace itself will fit reel seats with mounting hole dimensions from @ 1 1/4" to 1 3/8" (@ 32mm to 35mm) which does...

OKUMA 11140005, 11140006, 11140044, 111400048, & 11140068 ROD & REEL BRACE / CLAMP (CLAMP ONLY) This Brace itself will fit reel seats with mounting hole dimensions from @ 1 9/16" to 1 11/16" (@ 41mm to...

OKUMA 11150003 ROD BRACE CLAMP BOLT FLAT HEAD

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT

OKUMA 11170013 10mm HANDLE NUT (11117005-03002) This nut has a reverse thread & will only work on left hand retrieve model reels only. If you need a standard thread nut, please click here...

OKUMA 11170010, 11170012, & 41170001 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different...

OKUMA 11170011 & 11170017 HANDLE RETAINER NUT *Handle Retainer Nut numbers 11170011, 11170017, & 11117007-03001 are all the same part, just assigned a different production number. CATALINA CT-15C,...

OKUMA 11080013 HANDLE SIDE HANGER / HARNESS LUG (11108009-06001)  CATALINA CT-55C, 55N, & 55W CLARION CLR-553L & 553LS CLASSIC PRO CL-552 & 552W COLD...

OKUMA 11070021 LINE GUARD (11107018-06001) This is the steel bar with internal threads that is located inside the top of the Main Body Assembly that secures the Left Side & Right Side Hangers (#108 & #108-1) with...

OKUMA 11080012 HANDLE SIDE HANGER / HARNESS LUG (11108008-06001)  CATALINA CT-55C, 55N, & 55W CLARION CLR-553L & 553LS CLASSIC PRO CL-552 & 552W COLD...

OKUMA 12010018 ANTI REVERSE PAWL (11201010-06001) CATALINA CT-55C, 55N, & 55W CLASSIC PRO CL-552 & 552W CONVECTOR CN / CV-55, 55L, 55LS, 55S, 55SS, & 55W DIEZEL DZ-55 STAR...

OKUMA 12010013 ANTI-RE PAWL (11201013-06001) BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, & 45L CONVECTOR CN CN-30CS CONVECTOR CV...

OKUMA  12010011 ANTI REVERSE PAWL (11201008-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200C, 200C, 202, 202C, & 202L CLASSIC PRO CLX (XT) CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L &...

OKUMA 12010001 ANTI REVERSE PAWL (11201001-06) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, & 452L CLASSIC PRO XT CLX-300L, 302L, 450L, 450LX,...

OKUMA 12040016 COMPRESSION SPRING (11204008-06001) *This is the long coil spring that resides at the base of the drive gear shaft that actuates the Auto Trip mechanism...

OKUMA 12070056 STAINLESS STEEL HOLD PLATE (11207022-06001) CATALINA CT-55C, 55N, & 55W CLASSIC PRO CL-552 & 552W CONVECTOR (CN) CN-55, 55L, 55S, 55SS, & 55W CONVECTOR (CV) CV-55, 55L,...

OKUMA 12070044 & 12070048 HOLD PLATE *Please note that due to availability, this product may arrive in brass or steel. AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450C, 450L ,452, 452C, & 452L (FIRST GEN...

OKUMA 12070046 HOLD PLATE (11207011-03001) AVENGER AV-300L (1st Generation) AURORA CLASSIC CL-30L CLASSIC PRO CL-300, 300C, 300L, 302C, & 302L (1st Generation) CONVECTOR CN-30C, 30D, & 30L DIEZEL DZ-30D &...

OKUMA 12070062 HOLD PLATE (11207027-06001) CATALINA CT-25C, 25CS, 25D, 25L, 305Da, 30C, 30CS, 30D, & 30L CONVECTOR CV-30C, 30CS, 30D &...

OKUMA 12070052 HOLD PLATE (11207017-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, & 20L DIEZEL DZ-20D & 20L SEARAY SR-20L  STAR...

OKUMA 12150013 & 12150015 HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production number...

OKUMA 12240004 & 12240017 ONE WAY BEARING CUP...

OKUMA 12080024 SIDE PLATE COVER (11208012-06001) CATALINA CT-55C, 55N, & 55W CLARION CLR-553L & 553LS CONVECTOR CN / CV-55, 55L, 55LS, 55S, 55SS, &...

OKUMA 12110009 ANTI REVERSE PAWL PIN (11211003-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-150L 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO...

OKUMA 12110008 & 12110034 ANTI REVERSE PAWL PIN (11211002-03001) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C,...

OKUMA 12110002 ANTI REVERSE PAWL PIN *Part numbers 12110002, 12110006, 12110008, 11211002-03001, 11211002-03, & 11211005-03001 are all the same part that were just assigned a different production...

OKUMA 14000542 SPOOL ASSEMBLY (1140004414005) CATALINA CT-55W CONVECTOR...

OKUMA 12120019 COUNTER COVER (112120010183) CONVECTOR CN-15D, 20D, 30D, &...

OKUMA 14180002 & 14180007 SPOOL BEARING FIXED PLATE (11418002-01001) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, & 30L CONVECTOR CN-30CS CONVECTOR CV-30C, 30CS, &...

OKUMA 14180004 SPOOL BEARING FIXED PLATE (11418004-01001) CATALINA CT-55C, 55N, & 55W CONVECTOR CN / CV-55, 55L, 55LS, 55S, 55SS, &...

OKUMA 16080006 BALL BEARING RETAINER...

OKUMA 12160003 ANTI-RE PAWL SPRING (11216002-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-200L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, &...

OKUMA 12160001, 12160002, 12160010, & 12160018 ANTI REVERSE PAWL SPRING *Part numbers 12160001, 12160002, 12160010, 12160018, 11216001-06, & 11216001-06001 are all the same part that...

OKUMA 15160001 & 15160002 HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different number which...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This Drive Gear Shaft Bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 13020025 WASHER...

OKUMA 13030045 & 13030048 CLICK BUTTON Click button numbers 13030045, 13030048, 11303010-13907, & 11303010-03907 are all the same part that were just assigned a different number & fit all the reels...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13110033 & 13110034 SIDE PLATE COVER (11311009-06001) CONVECTOR CN-55L CV-55L &...

OKUMA 13050007 CLICK PAWL SPRING (PLASTIC) *Click Pawl Spring numbers 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different number over the years that may arrive...

OKUMA 13050003 & 13050015 CLICK SPRING (1130500201) *Please note that the stainless steel version of this Click Spring has been discontinue & has been replaced with this copper version which works equally as...

OKUMA 14000367 SPOOL ASSEMBLY *Spool numbers 14000367, 14000402, 14000409, 1140003304003, 1140003314003A, & 1140003314005A are all the same part that were just assigned a different production number. CATALINA...

OKUMA 14000607 SPOOL ASSEMBLY (1140005016003) CONVECTOR CN-55SS &...

OKUMA 14000477 SPOOL ASSEMBLY Spool numbers14000477, 14000480, 14000482, 14000492, 14000495, 1140004204003, 1140004204005, 1140004214005, 1140004214003, & 1140004204005A are all the same part that...

OKUMA 14010002 & 14010026 SPOOL CLICK GEAR  *Spool Click Gear numbers 14010002, 14010026, 1140101101, 11401001-05001, & 11401001-05002 are all the same part that were just assigned a...

OKUMA 15150001 HANDLE NUT LOCK SCREW *Screw number 15150001, 15150002, 11515001-03907, & 11515001-06001 are all the same part that was just assigned a different production number. CATALINA CT-15C, 15D,...

OKUMA 16110040 METAL EARED WASHER This is the metal "Eared Drag Washer or "Drag Plate" that is always located in the middle of the drag sequence as shown in the photo below. Washer numbers...

OKUMA 16110005 & 16110006 EARED WASHER  *Eared Washer numbers 16110005, 16110006, & 11611005-06 are all the same part that were just assigned a different production number...

OKUMA 16110037 EARED WASHER...

OKUMA 46120002 DOMED KEY WASHER (11612007-06001)

OKUMA 16120045 DOMED KEY WASHER (11612026-06001) This is the Domed metal "Keyed Drag Washer or "Drag Plate" that is always located on the very top of the drag sequence as shown in the...

OKUMA 16120027 KEY...

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 16140001 & 16140003 DRAG SPRING WASHER This is the Spring Washer that prevents any binding issues between the Star Drag Knob & the Handle arm itself. *Washer numbers 16140001,...

OKUMA 16150132 INDEXED STAR DRAG KNOB ASSEMBLY (1161501801907) CATALINA CT-15C, 15D, 15L, 20C, 20D, & 20L (Second version) CONVECTOR CV-15C, 15CS, 15D, 15L, 20C, 20CS, 20D, & 20L *Please examine the drag...

OKUMA 16150048 STAR DRAG CONVECTOR CN-30LX *Star Drag numbers 16150048, 16150056, 11615007-04004B, & 11615007-04002B are all the same part that were just assigned a different number that will only work on the...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides between the inside of the Cast Control Cap & the metal End Thrust Washer. We also include this in our Cast Control Kits...

OKUMA 17000205, 17000210, & 17000211 DRIVE GEAR *Drive gear numbers 17000205, 17000210, 17000211, 1170000803006, 11700008-03002, & 11700008-03006 are all the same part that were just assigned a...

OKUMA 17000247 STAINLESS STEEL DRIVE GEAR (1170002806002) CATALINA CT-55C & 55W CLARION CLR-553L CLASSIC PRO CL-552 & 552W CONTOURA CR-553 & 603 CONVECTOR CN / CV-55, 55L, 55SS,...

OKUMA 17000026, 17000199, & 17000200 DRIVE GEAR  Drive gear numbers 17000199, 17000200, 11700006-032, 11700006-03002, & 1170000603002 are all the same part that were just assigned different production...

OKUMA 17010144  DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010135, 17010142, 17010144, 17010146, 1170103106001, 1170103406001, & 1170103416001 are all the same part that were just assigned a different production...

OKUMA 17010103 DRIVE GEAR SHAFT (1170102313001) This Drive Gear Shaft has a reverse thread that will only work on left hand retrieve reels which has an overall length of @ 1.890" (48mm). CONVECTOR...

OKUMA 17010067, 17010070, & 17010122 DRIVE GEAR SHAFT  Drive Gear Shaft numbers 17010067, 17010070, 17010122, 1170102813001A, 1170100913001A & 1170100903001A are all the same part, that were just...

OKUMA 17010093 DRIVE GEAR SHAFT DRIVE GEAR SHAFT NUMBERS 17010094, 17010096, 1170102113001, & 1170102113001A are all the same part, that were just assigned a different number which has an overall length of...

OKUMA 17020272 STAINLESS STEEL PINION GEAR 6.2:1 *Pinion Gear numbers 17020272, 17020275, 17020276, 17020485, 1170203203002, & 1170203206002 are all the same part that were either assigned a different...

OKUMA 17020258, 17020383, & 17020489 STAINLESS STEEL PINION GEAR HIGH SPEED 6.2:1 Pinion gear numbers 17020258, 17020383, 17020489, 1170202803002, & 1170202806002 are all the same part that...

OKUMA 17020264 PINION GEAR *This is the stainless steel version of pinion gear numbers 17020264, 17020265, 17020266, 17020354, 17020482, 11702030-06002, 11702030062, & 1170203003002  which...

OKUMA 17020243 & 17120244 PINION GEAR *Pinion gear numbers 17020243, 17120244, 11702008032, & 1170200803002 are all the same part that were just assigned a different number that will only work on left...

OKUMA 17020023, 17020322, & 17020237 PINION GEAR *Pinion gear numbers 17020023, 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part,...

OKUMA 17020246 PINION GEAR (1170201103002) Before you buy this gear... Please examine the Pinion Gear you are replacing closely & compare it to the one in the photographs. If the spool shaft does not look...

OKUMA 17020310 PINION GEAR (1170203603002) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L & 202La CLASSIC PRO XPD...

OKUMA 17030009 WORM SHAFT GUARD (11703010-03907) CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN / CV-55L & 55LS STAR DRAG SD-55L TITUS...

OKUMA 17030008 WORM SHAFT GUARD (11703009-03) AURORA CLASSIC CL-20L CATALINA CT-205Da, 20D, & 20L CLARION CLR-203L & 204D CLASSIC PRO CL-200L & 202L CLASSIC PRO CLX (XT) CLX-200L &...

OKUMA 17030011 WORM SHAFT GUARD (11703011-03001) CATALINA CT-15D & 15L CLASSIC PRO CL-150 CLASSIC PRO CLX (XT) CLX-150La COLD WATER CW-153D CONVECTOR CN / CV-15D & 15L MAGDA PRO MA-15D, 15DLT, 15DT, 15DX,...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CLARION CLR-453L, 453LS, & 454D CLASSIC PRO CL-450L & 452L CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L,...

OKUMA 17030004 & 17030006 WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XT...

OKUMA 17040013 WORM GUIDE SUPPORT BAR *Part numbers 17040013, 17040022, 11704009-03, & 11704009-03907 are all the same part, that were just assigned a different production number. CLASSIC PRO CL-200C &...

OKUMA 17040024 & 17040042 LINE GUIDE SUPPORT BAR (11704015-03001) CATALINA CT-15D & 15L CLASSIC PRO CL-150 CLASSIC PRO CLX (XT) CLX-150La COLD WATER CW-153D CONVECTOR CN-15D & 15L MAG SYSTEM...

OKUMA 17040008 WORM GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XPD LINE COUNTER XPD-30D, 30Da, 30DLX, &...

OKUMA 17040026 WORM GUIDE SUPPORT BAR (11704017-03001) CONVECTOR CV-15D & 15D MAGDA PRO MA-15D, 15DT, 15DX, & 15DXT MAGNETICS MG-15LS SCHEELS OUTFITTERS SO-15LC & 15LCA STRATAMASTER...

OKUMA 17040028 WORM GUIDE SUPPORT BAR (11704019-03001) CLARION CLR-553L & 553LS COLD WATER CW-553LS CONVECTOR CN / CV-55L & 55LS  STAR DRAG...