CLARION CLR SERIES

Rotary Tool Buffing Wheel 15/16" MC13 180 grit Scotch BriteTM abrasive.Check out the enlarged photo... You don't want to rebuild without...

OKUMA CLARION CLR-203L & CLR-204D CARBON FIBER DRAG WASHER SET BY DRAGMASTERSTM Drastically increase the performance potential of any Okuma Clarion CLR-203L & CLR-204D series reel in only minutes...

6.2:1 HIGH SPEED GEAR CONVERSION KIT FOR ALL OKUMA 55, 553, & 603 SIZE REELS The best way to go to take all the guess work out of missing parts & way cheaper too! This complete High Speed Conversion Kit uses only...

CARBON FIBER DRAG WASHER SET F0R CLARION CLR 303 THRU 454 SERIES REELS BY DRAGMASTERSTM Drastically increase the performance potential of any Okuma Clarion CLR-303L, CLR-304D, CLR-453L, CLR-453LS, & CLR-454D...

OKUMA CLARION CLR-553L & CLR-553LS CARBON FIBER DRAG WASHER SET BY DRAGMASTERSTM Drastically increase the performance potential of any Okuma Clarion CLR-553L & CLR-553LS reel in only minutes by...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERSTM 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERSTM 8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

OKUMA 0.25 OZ. REEL OIL

OKUMA CAST CONTROL CAP KIT The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Cast Control Cap Kit uses only genuine Okuma O.E.M. parts to ensure a complete...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp &...

OKUMA 11140005 ROD BRACE CLAMP & HARDWARE KIT The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Rod Brace Clamp & Hardware Kit uses only...

OKUMA 15000212 POWER HANDLE ASSEMBLY *This Handle Assembly now replaces 15000214, 15000216, 15000219, 1150002304005, 1150002304006, & 1150002304006C. Even though this Handle Assembly was intended for use...

OKUMA 17150009 LINE GUIDE PAWL If you need a Line Guide Pawl for any Okuma 15, 20, 25, 30, or 45 Size level wind reel, this O.E.M. part is it & If your unsure, just check out the list below! Line...

OKUMA HANDLE INSTALLATION KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma Handle Installation Kit uses only genuine...

OKUMA 17150001 LINE GUIDE PAWL (11715002-06) CLARION CLR-553L & CLR-553LS COLD WATER CW-553LS CONVECTOR CN-55L CONVECTOR CV-55L & CV-55LS STAR DRAG SD-55L SOLTERRA SLR-50L TITUS T-20L &...

OKUMA 11050006  WORM SHAFT BUSHING *Worm shaft bushing numbers 11050006, 11050007, 11050014, 11105003-01, 11105004-01, 11105010-01001, 11105009-01001, & 11050017 are all the same part that were just...

OKUMA 11050009 WORM SHAFT BUSHING

OKUMA 11070021 LINE GUARD (11107018-06001) This is the steel bar with internal threads that is located inside the top of the Main Body Assembly that secures the Left Side & Right Side Hangers (#108 & #108-1) with...

OKUMA 11080012 HANDLE SIDE...

OKUMA 11080015 CLICKER SIDE HANGER...

OKUMA 11170011 HANDLE RETAINER NUT *Handle Retainer Nut numbers 11170011, 11170017, & 11117007-03001 are all the same part, just assigned a different production number. Click here for our complete Handle...

OKUMA 12010036 ANTI REVERSE PAWL (11201031-06002)

OKUMA 12010037 ANTI REVERSE PAWL...

OKUMA 12010038 ANTI REVERSE PAWL...

OKUMA 12040016 COMPRESSION SPRING (11204008-06001) *This is the long coil spring that resides at the base of the drive gear shaft that actuates the Auto Trip mechanism...

OKUMA 12070070 HOLD PLATE (1120703801) CATALINA CT-25C, CT-25CS, CT25D, CT-25L 305Da, CT-30C, CT-30CS, CT-30D, & CT-30L CLARION CLR-303L & CLR-304D CONVECTOR CV-30C, CV-30CS, & CV-30D  CONTOURA...

OKUMA 12070077 HOLD PLATE (11207043-01001) ALC MAG SURF ALC-20CS CATALINA CT-15C, CT-15D, CT-15L, CT-205Da, CT-20C, CT-20D, & CT-20L CLARION CLR-203L & CLR-204D CONTOURA CR-203CS CONVECTOR CV-15C,...

OKUMA 12070078 HOLD PLATE (11207044-01001) CLARION CLR-553L & CLR-553LS CONTOURA CR-553 CONVECTOR CV-55, CV-55L, CV-55LS, CV-55S, &...

OKUMA 12070083 HOLD PLATE (11207049-01001) CATALINA CT-455Da, CT-45C, CT-45D, & CT-45L CLARION CLR-453L, CLR-453LS, & CLR-454D CONTOURA CR-453CS CONVECTOR CV-45C, CV-45D, CV-45DS, CV-45L, &...

OKUMA 12110012 ANTI REVERSE PAWL PIN (11211005-03002)

OKUMA 12150013 HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production number over the years...

OKUMA 12160001 ANTI REVERSE PAWL SPRING *Part numbers 12160002, 11216001-06, & 11216001-06001 are all the same part that were just assigned a different number over the years...

OKUMA 12160006 ANTI REVERSE PAWL & CLICK SPRING *Spring numbers 12160006, 12160011, & 1121600401 are all the same part that were just assigned a different production number...

OKUMA 12160006 CLICK PAWL...

OKUMA 12240019 ONE WAY BEARING CLUTCH CAP (11224017-02002)

OKUMA 12280002 TROLLING SPOOL CONTROL (TSC) CLICK...

OKUMA 12290001 & 12290002 TROLLING SPOOL CONTROL (TSC) CLICK SPRING / WASHER

OKUMA 12300001 TROLLING SPOOL CONTROL (TSC) DRAG WASHER...

OKUMA 13020002 WASHER (11302002-03001) This is the metal end thrust washer that resides behind or under the ball bearing or bronze bushing located on the click side or vice  side plate...

OKUMA 13020025 WASHER...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13030052 CLICK BUTTON...

OKUMA 13040011 CLICK PAWL (1130401301)

OKUMA 13040013 CLICK...

OKUMA 13040014 CLICK PAWL (1130401401) CATALINA CT-205Da CLARION CLR-203L & CLR-204D CONTOURA CR-203CS MAGNETIX MG-20CS &MG-20LS...

OKUMA 13050003 & 13050012 COPPER CLICK SPRING...

OKUMA 13050009 CLICK PAWL SPRING (1130500301) CATALINA CT-305Da & CT-455Da CEDROS CSD-10, CSD-10S, CSD-12, CSD-12S, & CSD-15S CLARION CLR-303L, CLR-304D, CLR-453L, CLR-453LS, & CLR-454D CONTOURA...

13050010 CLICK  PAWL SPRING (1130500401)

OKUMA 14010026 SPOOL CLICK GEAR  *Spool Click Gear numbers 14010026, 1140101101, & 11401001-05002 are all the same part that were just assigned a different production number over the years...

OKUMA 14010029 CLICK GEAR CLARION CLR-453L & CLR-453LS CONTOURA CR-453CS MAG SYSTEM MS-45CS & MS-45LS MAGNETICS MG-45CS &...

OKUMA 14010030 STAR DRAG CLICK GEAR...

OKUMA 15000298 "Ergo Grip®" HANDLE ASSEMBLY (1150002701927A) CLARION CLR-203L & CLR-204D CONTOURA...

OKUMA 15000299 "Ergo Grip®" HANDLE ASSEMBLY (1150002801927A) CLARION CLR-303L, CLR-304D, CLR-453L, CLR-453LS, &...

OKUMA 15150001 HANDLE NUT LOCK SCREW *Screw number 15150001, 15150002, 11515001-03907, & 11515001-06001 are all the same part that was just assigned a different production number...

OKUMA 16000098 CAST CONTROL CAP (11600032-04001) CATALINA CT-205Da CLARION CLR-203D &...

OKUMA 16000099 & 16000140 TROLLING SPOOL CONTROL (TSC) CAST CONTROL CAP CATALINA CT-305Da & CT-455Da CLARION CLR-304D &...

OKUMA DRAG SPRING WASHER PAIR *Drag Spring Washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all the same part that were just assigned a...

OKUMA 16110040 METAL EARED WASHER This is the metal "Eared Drag Washer or "Drag Plate" that is always located in the middle of the drag sequence as shown in the photo below. Washer numbers...

OKUMA 16110045 EARED WASHER...

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16120039 FLAT METAL KEY WASHER (11612019-06001) This is the flat metal "Keyed Drag Washer or "Drag Plate" that is always located on the bottom of the drag sequence & on top of the...

OKUMA 16120045 DOMED KEY WASHER (11612026-06001) This is the Domed metal "Keyed Drag Washer or "Drag Plate" that is always located on the very top of the drag sequence as shown in the...

OKUMA 16130018 TROLLING SPOOL CONTROL WASHER (1161301901)

OKUMA 16140003 DRAG SPRING WASHER This is the Spring Washer that prevents any binding issues between the Star Drag Knob & the Handle arm itself. *Washer numbers 16140001, 16140003, 11614001-06,...

OKUMA 16150156 INDEXED STAR DRAG KNOB ASSEMBLY (1161501702927) CLARION CLR-303L, CLR-453L, & CLR-453LS CONTOURA CR-303CS &...

OKUMA 16150158 & 16250178 INDEXED STAR DRAG KNOB CLARION CLR-203L &...

OKUMA 16150164 STAR DRAG ASSEMBLY (1161501701927) CATALINA CT-305Da & CT-455Da CLARION CLR-304D, CLR-454D, CLR-553L, & CLR-553LS CONTOURA CR-553 &...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides between the inside of the Cast Control Cap & the metal End Thrust Washer. We also include this in our Cast Control Kits...

OKUMA 17000241 DRIVE GEAR (11700027-03002) *This is the same Drive Gear as 17000243 & 1170002706002 which is now manufactured in brass...

OKUMA 17000264 DRIVE GEAR (11700031-13002)

OKUMA 17010144  DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010142, 17010144, 17010146, 1170103406001, & 1170103416001 are all the same part that were just assigned a different production number that has an...

OKUMA 17010187 DRIVE GEAR SHAFT. Drive Gear Shaft numbers 17010187, 17010245, 17010246, 1170104516001, 1170103116001A, & 1170103116001B are all the same part, that were just assigned a different number...

OKUMA 17020258 STAINLESS STEEL PINION GEAR HIGH SPEED DRIVE GEAR 6...

OKUMA 17020264 BRASS PINION GEAR *This is the current brass version of Pinion Gear numbers 17020265, 17020266, 17020354, 11702030-06002, 11702030062, & 1170203003002. CATALINA CT-55C, CT-55N,...

OKUMA 17020264 PINION GEAR *This is the current stailess steel version of Pinion Gear numbers 17020265, 17020266, 17020354, 11702030-06002, 11702030062, & 1170203003002. CATALINA CT-55C, CT-55N,...

OKUMA 17020272 PINION GEAR *Pinion Gear numbers 17020272, 17020275, 17020276, 17020485, 1170203203002, & 1170203206002 are all the same part that were either assigned a different production number or have...

OKUMA 17020279 PINION GEAR *Pinion Gear numbers 17020279, 17020282, 17020285, 17020477, 11702033062, 1170203303002, & 1170203306002  are all the same part that is now only manufactured in brass. BIG LAKE...

OKUMA 17020352 PINION GEAR *Pinion Gear numbers 17020298, 17020352, 17020476, 17020378, 1170203503B2, & 1170203516002 are now all made in brass that are now all the same part, that are just assigned a...

OKUMA 17020383 BRASS PINION GEAR HIGH SPEED DRIVE GEAR 6...

OKUMA 17030006 WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L CLARION CLR-303L & CLR-304D CLASSIC PRO CL-300, CL-300L, CL-300LX, CL-302L-CL, & CL-302LX CLASSIC PRO XT...

OKUMA 17030005 WORM SHAFT GUARD...

OKUMA 17030008 WORM SHAFT GUARD (11703009-03) AURORA CLASSIC CL-20L CATALINA 205Da, CT-20D, & CT-20L CLARION CLR-203L & CLR-204D CLASSIC PRO CL-200L & CL-202L CLASSIC PRO CLX (XT) CLX-200L &...

OKUMA 17030009 WORM SHAFT GUARD (11703010-03907) CLARION CLR-553L & CLR-553LS COLD WATER CW-553LS CONVECTOR CN-55L, CV-55L, & CV-55LS STAR DRAG...

OKUMA 17040008 WORM GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & CLR-304D CLASSIC PRO CL-300, CL-300L, CL-300LX, CL-302L, & CL-302LX CLASSIC PRO XP XPD-30D, XPD-30Da, XPD-30DLX, &...

OKUMA 17040012 LINE GUIDE SUPPORT BAR *Support Bar numbers 17040012, 17040021, 11704008-03, & 11704008-03907 are all the same part that were just assigned a different production number AURORA CLASSIC...

OKUMA 17040019 WORM GUIDE SUPPORT BAR (11704004-03001)

OKUMA 17040028 WORM GUIDE SUPPORT BAR (11704019-03001) CLARION CLR-553L & CLR-553LS COLD WATER CW-553LS CONVECTOR CN-55L, CV-55L, & CV-55LS  STAR DRAG...

OKUMA 17050011 WORM SHAFT TRANSMISSION GEAR (11705006-06) This is the steel Transmission Gear that resides on the end of the Worm Shaft that is located on the Clicker side of the reel. This is also referred to as the...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel Transmission Gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17050015 TRANSMISSION GEAR (11705009-32) *This is the Transmission Gear that is secured to the end of the Worm Shaft by 'E' Retainer 29000001 that is located on the clicker side of the reel. CLARION CLR-553L...

OKUMA 17050017 TRANSMISSION GEAR (11705010-06001) *On level wind equipped reels, this is the Transmission gear that resides on the Spool shaft on the clicker side of the reel that is secured with 'C' Retainer 29000006...

OKUMA 17060003 TRANSMISSION GEAR (11706002-06) *This is the small Transmission Gear that resides on the end of the spool shaft on the clicker side of the reel. This Gear may arrive in either a cast steel or brass finish...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel Transmission Gear that resides on the end of the spool axle shaft on the clicker side of the reel that is secured be 'C' retainer #19000001...

OKUMA 17070009 TRANSMISSION GEAR (11707008-11) This is the "stepped" Transmission Gear that is located under the Click Pawl Spring that is secured to the Vice Side Plate with one small Phillips screw & is also referred...

OKUMA 17070010 TRANSMISSION GEAR (11707009-06001) This is the "stepped" metal Transmission gear that is secured to the clicker side plate that drives the steel gear secured to the Worm Shaft. CLARION CLR-553L...

OKUMA 17080007 TRANSMISSION GEAR (11708007-06001) This is the Transmission gear that drives the "stepped" metal Transmission gear that are secured to the clicker side plate that drives the steel gear secured...

OKUMA 17080014 TRANSMISSION GEAR *Transmission Gear numbers 17080014, 17080015, 1708008-01001, & 1708009-01001 are all the same part that were just assigned different numbers over the years. **This is the...

OKUMA 17090004 TRANSMISSION GEAR BUSHING *Bushing numbers 17090004, 17090017, 11709002-03, & 1170900201 are all the same part that were just assigned a different production number...

OKUMA 17090014 TRANSMISSION GEAR...