SEARAY SR

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary Tool Buffing Wheel 15/16" MC13 180 grit Scotch BriteTM abrasive.Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA SEARAY SR-20L, 30L, & 45L CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Searay series reel in only minutes by adding a new set of...

OKUMA 16000038 CAST CONTROL CAP (11600014-03001) This cast control cap is for right hand retrieve reels only & will not work on any DLX or LX left hand retrieve reels. For that application click here. Also, this...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL If you need a Line Guide Pawl for any Okuma 15, 20, 25, 30, or 45 Size level wind reel, this O.E.M. part is it & If your...

OKUMA 15000105 SILVER TWIN HANDLE ARM ASSEMBLY (1150000504X) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, 202L, 300, 300C, 300L, 300LX, 302C, 302L, & 302LX MAGDA / MAGDA PRO MA-15D, 15DX, 20D,...

OKUMA 15000121*, 15000134, 15000157, & 15000159 HANDLE ASSEMBLY (1150000604006 & 1150001004907) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 452, 452C, 452L,...

OKUMA 15000171 & 15000173* TWO POSITION BALANCED HANDLE ASSEMBLY *Handle numbers 15000171, 15000173, 1150001304905A, & 1150001304907A are all the same part that were just assigned a different number...

OKUMA 15000105 BLACK TWIN HANDLE ARM ASSEMBLY (1150000504907) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, 202L, 300, 300C, 300L, 300LX, 302C, 302L, & 302LX MAGDA / MAGDA PRO MA-15D, 15DX,...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma rod brace clamp & hardware kit...

OKUMA 11050006 (11105003-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT

OKUMA 11170010, 11170012*, & 41170001 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different...

OKUMA  12010011 ANTI REVERSE PAWL (11201008-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200C, 200C, 202, 202C, & 202L CLASSIC PRO CLX (XT) CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L &...

OKUMA 12010001, 12010057, & 12010089 ANTI REVERSE PAWL (11201001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, &...

OKUMA 12070044 & 12070048 HOLD PLATE *Please note that due to availability, this product may arrive in brass or steel. AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450C, 450L ,452, 452C, & 452L (FIRST GEN...

OKUMA 12070046 HOLD PLATE (11207011-03001) AVENGER AV-300L (1st Generation) AURORA CLASSIC CL-30L CLASSIC PRO CL-300, 300C, 300L, 302C, & 302L (1st Generation) CONVECTOR CN-30C, 30D, & 30L DIEZEL DZ-30D &...

OKUMA 12070052 HOLD PLATE (11207017-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, & 20L DIEZEL DZ-20D & 20L SEARAY SR-20L  STAR...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12110009 ANTI REVERSE PAWL PIN (11211003-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-150L 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO...

OKUMA 12110002 & 12110006* ANTI REVERSE PAWL PIN *Part numbers 12110002, 12110006, 11211002-03001, 11211002-03, & 11211005-03001 are all the same part that were just assigned a different...

OKUMA 12160003 ANTI-RE PAWL SPRING (11216002-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-200L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, &...

OKUMA 12160004 ANTI-RE PAWL SPRING *Spring numbers 12160004, 11216001-06, & 11216001-06002 are all the same part that were just assigned a different production number. CATALINA CT-15C, 15D, 15L, 20C,...

OKUMA 13110023 SIDE PLATE COVER (11311005-06001) CLASSIC PRO CL-452, 452C, & 452L CATALINA CT-45C, 45D, & 45L CONVECTOR CN / CV 45C, 45CS, 45D, 45DS, 45L, & 45LS MAGDA MA-45DX SEARAY...

OKUMA 15160001 & 15160002* HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different...

OKUMA 13020005 SPOOL SHAFT BUSHING (11302005-03) This is the bronze bushing that supports the end of the spool shaft that resides in the click side cover...

OKUMA 13030045 & 13030048 CLICK BUTTON Click button numbers 13030045, 13030048, 11303010-13907, & 11303010-03907 are all the same part that were just assigned a different number & fit all the reels...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050002 & 13050007* CLICK PAWL SPRING (PLASTIC) *Click Pawl Spring numbers 13050002, 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different...

OKUMA 13050003 & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been replaced with this copper...

OKUMA 14000092 & 14000297 SPOOL ASSEMBLY Spool numbers 14000092, 14000297, 11400013-0112, & 114000130112 are all the same part, that were just assigned a different production number. CLASSIC PRO CL-450,...

OKUMA 14000304* & 14000309 SPOOL ASSEMBLY *Spool numbers 14000304, 14000309, 1140002901001C, & 11400029-01001C are all the same spool that were just assigned a different production...

OKUMA 14000282 & 14000283 SPOOL ASSEMBLY Spool Assembly numbers 14000282, 14000283, 114000100112, & 11400010-0112 are all the same part that were just assigned a different production number...

OKUMA 14010002 & 14010026* SPOOL CLICK GEAR  *Spool Click Gear numbers 14010002, 14010026, 1140101101, 11401001-05001, & 11401001-05002 are all the same part that were just assigned a...

OKUMA 16090002, 16090003, 16090004*, & 16090009 DRAG SPRING WASHER SET *Drag Spring Washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all...

OKUMA 16110005 & 16110006 EARED WASHER  *Eared Washer numbers 16110005, 16110006, & 11611005-06 are all the same part that were just assigned a different production number...

OKUMA 16120029 KEY...

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the Spring Washer that prevents any binding issues between the Star Drag Knob & the Handle arm itself. *Washer numbers 16140001,...

OKUMA 16150028 & 16150030 STAR DRAG (11615005-01607) AVENGER AV-300L SEARAY SR-30L &...

OKUMA 16150009 & 16150202 STAR DRAG KNOB (11615003-01001) *Please note that this will work just fine as a replacement for the Okuma Searay SR-20L (#16150016) if you don't mind the color! AURORA...

OKUMA 16170018 DRIVE GEAR SHAFT BUSHING (INNER) *Drive Gear Shaft Bushing numbers 16170018, 11617006-01, & 11617015-03 are all the same part that were just assigned a different production number. **This Drive...

OKUMA 16170008 & 16170023 DRIVE GEAR SHAFT BUSHING (OUTER) Bushing numbers 16170008, 16170023, 11617005-03, 11617018-01001, & 11617006-01002 are all the same part that were just assigned a different...

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 13020014 & 13020015 WASHER (11302002-06001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides between the inside of the Cast Control Cap & the metal End Thrust Washer. We also include this in our Cast Control Kits...

OKUMA 17000205, 17000210, & 17000211* DRIVE GEAR *Drive gear numbers 17000205, 17000210, 17000211*, 1170000803006, 11700008-03002, & 11700008-03006 are all the same part that were just assigned a...

OKUMA 17000026, 17000199, & 17000200 DRIVE GEAR  Drive gear numbers 17000199, 17000200, 11700006-032, 11700006-03002, & 1170000603002 are all the same part that were just assigned different production...

OKUMA 17010077 & 17010078 DRIVE GEAR SHAFT Drive Gear numbers 1701077, 17010078, & 1170101603001A are all the same part, that were just assigned a different number which has an overall length of @ 1.700"...

OKUMA 17020023, 17020322, & 17020237 PINION GEAR *Pinion gear numbers 17020023, 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part,...

OKUMA 17020310 PINION GEAR (1170203603002) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L & 202La CLASSIC PRO XPD...

OKUMA 17030008 WORM SHAFT GUARD (11703009-03) AURORA CLASSIC CL-20L CATALINA CT-205Da, 20D, & 20L CLARION CLR-203L & 204D CLASSIC PRO CL-200L & 202L CLASSIC PRO CLX (XT) CLX-200L &...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CLARION CLR-453L, 453LS, & 454D CLASSIC PRO CL-450L & 452L CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L,...

OKUMA 17040008 WORM GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XPD LINE COUNTER XPD-30D, 30Da, 30DLX, &...

OKUMA 17040007 WORM GUIDE SUPPORT BAR (11704004-03907) AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450L, 452, & 452L CONVECTOR CN-45 & 45L CONVECTOR CV-45D & 45L DIEZEL DZ-45L MAGDA PRO MA-45D &...

OKUMA 17040012* & 17040021 LINE GUIDE SUPPORT BAR *Support Bar numbers 17040012, 17040021, 11704008-03, & 11704008-03907 are all the same part that were just assigned a different production...

OKUMA 17050011 WORM SHAFT TRANSMISSION GEAR (11705006-06) This is the steel Transmission Gear that resides on the end of the Worm Shaft that is located on the Clicker side of the reel. This is also referred to as the...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel Transmission Gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060003 TRANSMISSION GEAR (11706002-06) *This is the small Transmission Gear that resides on the end of the spool shaft on the clicker side of the reel. This Gear may arrive in either a cast steel or brass finish...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel Transmission Gear that resides on the end of the spool axle shaft on the clicker side of the reel that is secured be 'C' retainer #19000001...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the Transmission Gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17070009 TRANSMISSION GEAR (11707008-11) This is the "stepped" transmission gear that is located under the click pawl spring that is secured to the vice side plate with one small Phillips screw & is also referred...

OKUMA 17100009 LINE GUIDE ASSEMBLY (1171000506) CLASSIC PRO CL-300L, 300LX, 302L, & 302LX DIEZEL DZ-30D MAGDA PRO MA-30D, 30DLT, 30DT, 30DX, 30DLX, 30DLXT, & 30DXT ROX 30DX SCHEELS OUTFITTERS SO-30LC,...

OKUMA 17100040* & 17100070 LINE GUIDE ASSEMBLY (1171000906) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200L, & 202L CLASSIC PRO XT CLX-150La & 200La DIEZEL DZ-20L MAGDA MA-15D, 15DLT, 15DT-T,...

OKUMA 17120026, 17120051, & 17120062 WORM SHAFT *Please examine the worm shaft you are replacing closely & compare it to the one in the photographs as there has been a design change on the Convector CV-20L...

OKUMA 17120021 WORM SHAFT (11712011-03907) *Please examine the worm shaft you are replacing closely & compare it to the one in the photographs as there has been a design change on the Convector CV-45L. This...

OKUMA 17120014, 17120019, 17120020*, & 17120055 WORM SHAFT *Worm Shaft numbers 17120014, 17120019, 17120020, 17120055, 11712005-03, & 11712010-13907 are all the same part that were just...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl Cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 18000012 & 18000014* CLUTCH CAM / CLUTCH SHAFT Clutch Cam numbers 18000012, 18000014, 11800004-02002, & 11800004-12002 are all the same part, that were just assigned a different production...

OKUMA 18010007* & 18010012 CLUTCH SPRING (11801005-06001) AVENGER AV-300L CATALINA 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da CLASSIC PRO CLX (XT)...

OKUMA 18020015 CLUTCH BAR (11802004-01) *Please note that due to availability this product may arrive in either black or dark blue color... Pretty hard to tell the difference! CLASSIC PRO CL-450, 450C, 450L, 452, 452C,...

OKUMA 18020001 CLUTCH BAR (11802003-01) *Please note that due to availability this product may arrive in either black or dark blue. CLASSIC PRO CL-150, 200C, 200L, 202, 202C, 202L, 300, 300C, 300L, 300LX, 302C, 302L, &...

OKUMA 18040004 CLUTCH CAM SLIDER (11804004-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, C200L, 202, 202C, & 202L CLASSIC PRO XT CLX-200L CLASSIC PRO XP XP-202L CONVECTOR CN-15C, 15L, 20C, & 20L DIEZEL...

OKUMA 18040001 CLUTCH CAM SLIDER (11804001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L, 302LX, 450, 450C, 450L, 452, 452C, & 452L CLASSIC...

OKUMA 18050002 PINION GEAR YOKE (11805002-01) AURORA CLASSIC CL-20L CLASSIC PRO CL-150L, 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L & 202La CLASSIC PRO XPD...

OKUMA 18050001 PINION GEAR YOKE (11805001-06) *On some parts diagrams this may also be referred to as the "clutch yoke". AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L,...

OKUMA 18060001, 18060002, & 18060003* YOKE SPRING 1 PAIR *Yoke Spring numbers 18060001, 18060002, 18060003, 11806001-06, & 11806001-061 are all the same part that were just assigned a different...

OKUMA 29000001 'E' RETAINER...

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' Retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic Transmission Gear (#706) in...

OKUMA 0920151* & 0920317 DRIVE GEAR WASHER

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

OKUMA 0920108 TRANSMISSION GEAR WASHER (025.1x10.5x5-6) This is the washer that is located on the clicker side of the spool that resides between the small transmission gear & the spool click gear itself...

OKUMA 0930586 SCREW (03723X11...

OKUMA 0930210* & 0930633 TRANSMISSION GEAR SCREW (11707008-11) This is the Screw that Secures the white or black plastic Transmission Gear #707 to the Vice Side plate...

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the Washer that generally resides on the Worm Shaft between the Worm Shaft Bushing & 'E' Clip on the Handl side of the reel...

OKUMA 0920162 WASHER (028x10x0...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930753 SCREW (03422...

OKUMA 0930589 SCREW...

OKUMA 0930734 GOLD ANODIZED CLUTCH BAR SCREW...

OKUMA 0930696 & 09301225 HANDLE NUT RETAINER SCREW (03412...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0920157 WASHER (028.1x12x0.8-6)

OKUMA 0930194, 0930195, & 0930609* CLUTCH CAM SLIDER & CLICK BUTTON SCREW *Screw numbers 0930194, 0930195, 0930609, 03312X5-617 & 03312X3.5-61 are all the same part that were just assigned a...

OKUMA 0930575 SCREW (03222X4.5-61) ON CONVENTIONAL STAR DRAG REELS- This is the screw used to secure the spool click gear to the actual spool itself. two are required for this application. ON SPINNING REELS- This is...