XPD-30Da

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary Tool Buffing Wheel 15/16" MC13 180 grit Scotch BriteTM abrasive.Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA CLASSIC PRO XP & XPD SERIES CARBON FIBER DRAG WASHER SET BY DRAGMASTERS Drastically increase the performance potential of any Okuma Classic Pro XP or XPD series reel in only minutes by adding a new...

OKUMA CLASSIC PRO CAST CONTROL CAP & WASHER KIT 16000093 The best way to go to take all the guess work out of missing parts & way cheaper too! This complete Okuma Cast Control Cap Kit uses only genuine...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL If you need a Line Guide Pawl for any Okuma 15, 20, 25, 30, or 45 Size level wind reel, this O.E.M. part is it & If your...

OKUMA 15000467 & 15000470 HANDLE ASSEMBLY CLASSIC PRO CLX XT CLX-300La, 302La, 302LXa, 450La, 452La, & 452LXa CLASSIC PRO XP XP-302La & 452La CLASSIC PRO XPD  XPD-30Da & 30DLXa MAGDA PRO...

OKUMA ROD BRACE CLAMP & HARDWARE KIT Our kits are the best way to go that are designed to take all the guess work out of missing parts & way cheaper too! This complete Okuma rod brace clamp & hardware kit...

OKUMA 11050006 (11105003-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 (11105004-01) WORM SHAFT BUSHING *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11150003 ROD BRACE CLAMP BOLT FLAT HEAD

OKUMA 11160003 ROD BRACE CLAMP NUT LONG (1...

OKUMA 11170002 ROD BRACE CLAMP NUT

OKUMA 11170010, 11170012, & 41170001 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different...

OKUMA 12070097 HOLD PLATE AVENGER AV-300L CLASSIC PRO CL-300L & 302L CLASSIC PRO LINE COUNTER XPD-30D & 30Da MAGDA PRO MA-30D, 30DT, 30DX, & 30DXT MAGDA PRO XPD XPD-30D & MA-30DB ROX...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production number...

OKUMA 12110008 & 12110034 ANTI REVERSE PAWL PIN (11211002-03001) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C,...

OKUMA 12120009*, 12120038, & 12120009 DEPTH COUNTER COVER *Counter Cover numbers 12120009, 12120038, 12120063, 1121200101, 1121200101X, & 11212003-01001 are all the same part that were just assigned a...

OKUMA 12150029 HOLD PLATE BUSHING (11215031-0115) This is the small white or black bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12150030 HOLD PLATE BUSHING (11215031-0114) This is the white bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12160001, 12160002, 12160010, & 12160018* ANTI REVERSE PAWL SPRING *Part numbers 12160001, 12160002, 12160010, 12160018, 11216001-06, & 11216001-06001 are all the same part that...

OKUMA 15160001 & 15160002 HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different number which...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This Drive Gear Shaft Bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050002 & 13050007 CLICK PAWL SPRING (PLASTIC) *Click Pawl Spring numbers 13050002, 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different...

OKUMA 13050003 & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinue & has been replaced with this copper version which works equally as...

OKUMA 14010052 SPOOL CLICK GEAR  Please examine the part you are replacing closely & compare it to the one in the picture as there has been a recent design change. If it does not look like the one in the picture,...

OKUMA 14010002 & 14010026* SPOOL CLICK GEAR  *Spool Click Gear numbers 14010002, 14010026, 1140101101, 11401001-05001, & 11401001-05002 are all the same part that were just assigned a...

OKUMA 16090002, 16090003, 16090004*, & 16090009 DRAG SPRING WASHER SET *Drag Spring Washer numbers 16090002, 16090003, 16090004, 16090009, 11609003-05907,11609003-06001, 11609003-06002, & 11609003-06003 are all...

OKUMA 16110005 & 16110006 EARED WASHER  *Eared Washer numbers 16110005, 16110006, & 11611005-06 are all the same part that were just assigned a different production number...

OKUMA 16120027 KEY...

OKUMA 16120029 KEY...

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the Spring Washer that prevents any binding issues between the Star Drag Knob & the Handle arm itself. *Washer numbers 16140001,...

OKUMA 16150021 STAR DRAG (11615005-01001) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, 452L, 552, & 552W CLASSIC PRO XT CLX-300L, 300La, 302L, 302La,...

OKUMA 17000026, 17000199, & 17000200 DRIVE GEAR  Drive gear numbers 17000199, 17000200, 11700006-032, 11700006-03002, & 1170000603002 are all the same part that were just assigned different production...

OKUMA 17010077 & 17010078 DRIVE GEAR SHAFT Drive Gear numbers 1701077, 17010078, & 1170101603001A are all the same part, that were just assigned a different number which has an overall length of @ 1.700"...

OKUMA 17020023, 17020322, & 17020237 PINION GEAR *Pinion gear numbers 17020023, 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part,...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XT...

OKUMA 17040008 WORM GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO CL-300, 300L, 300LX, 302L, & 302LX CLASSIC PRO XPD LINE COUNTER XPD-30D, 30Da, 30DLX, &...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel Transmission Gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel Transmission Gear that resides on the end of the spool axle shaft on the clicker side of the reel that is secured be 'C' retainer #19000001...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the Transmission Gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is also referred to as...

OKUMA 17080003 TRANSMISSION GEAR (11708003-11) This is the small "conical" Transmission Gear that is located on the drive side of Depth Counter equipped reels mounts to the end of the Worm Shaft secured by a...

OKUMA 17120023 WORM SHAFT (11712014-03) CLASSIC PRO LINE COUNTER XPD-30D & 30Da CONVECTOR CN-30D DIEZEL DZ-30D MAGDA PRO MA-30D & 30DX MAGDA PRO XPD SERIES XPD- & 30DB ROX...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl Cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 18000005 & 18000008 CLUTCH CAM Clutch Cam numbers 18000005, 18000008, 11800002-02002, & 11800002-12002 are all the same part, that were just assigned a different production number which is also...

OKUMA 18010023 CLUTCH SPRING CLASSIC PRO XPD-30Da MAGDA PRO MA-30DT & 30DXT MAGDA PRO XPD SERIES XPD-30 & 30DB ROX ROX-30DX SCHEELS OUTFITTERS SO-30LCA & 30LCB STRATAMASTER...

OKUMA 18020038 CLUTCH BAR *Clutch Bar numbers 18020038, 11802005-01, 11802005-01X are all the same part that were just assigned a different production number. ** If you need a Clutch Bar for a CN-30D, please...

OKUMA 18040001 CLUTCH CAM SLIDER (11804001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L, 302LX, 450, 450C, 450L, 452, 452C, & 452L CLASSIC...

OKUMA 18050001 PINION GEAR YOKE (11805001-06) *On some parts diagrams this may also be referred to as the "clutch yoke". AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L,...

OKUMA 18060001 YOKE SPRING 1 PAIR *Yoke Spring numbers 18060001, 18060002, 18060003, 11806001-06, & 11806001-061 are all the same part that were just assigned a different production number. **Even though...

OKUMA 19100004, 19100028, 19100072, & 19100100 DEPTH COUNTER *Depth Counter numbers 19100004, 19100028, 19100072, 19100100, 11910001-01, 11910001-01003, & 1191000101003 are all the same part that...

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19000002 WORM SHAFT TRANSMISSION GEAR 'E' RETAINER (11900002-06) This is the very small 'E' Retainer located at the end of the Worm Shaft (Counter Side) that secures the small conical plastic gear that drives the...

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' Retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic Transmission Gear (#706) in...

OKUMA 0920151* & 0920317 DRIVE GEAR WASHER

OKUMA 0930438 SCREW (03122x8-61) On spinning reels, this is one of several screws that secure the side plate to the main body & once the rotor is removed, is located above the one way ball bearing. On star drag line...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

OKUMA 0930614 SCREW (03314x2x5-617) On lever drag reels: This screw is used to fasten the spool cover to the actual spool itself. On spinning reels: This screw is used to fasten the bearing fixed plate to the main...

OKUMA 0920166 DRIVE GEAR SHAFT...

OKUMA 0920076 WASHER (023.5x6x0.5-3) BAITCAST REELS: This is the washer that resides under the 'E' retainer that secures the clutch bar support in place. STAR DRAG REELS: This is the washer that is found...

OKUMA 0930501 SPOOL CLICK GEAR SCREW (03212x5-617) This is the small screw that attaches the spool click gear to the actual spool itself. Two are required...

OKUMA 0930799 SCREW (03423x12-62)

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930588 SCREW (03223x12-61) This is the screw that secures the vice side plate (click side cover) to the main body...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0930219 CLICK PAWL SPRING & HOLD PLATE MOUNTING SCREW (03327.5x2...

OKUMA 0910096, 0910097, 0910099, 0910103, 0910104, 0910280, 0910327, & 0910365 BALL BEARING *Ball Bearing numbers 0910096, 0910097,  0910099, 0910103, 0910104, 0910280, 0910327, 0910365, 01081605-5,...

OKUMA 0920157 WASHER (028.1x12x0.8-6)

OKUMA 0930426 COUNTER COVER SCREW, LARGE (03122x26-61) This is the larger Screw that is used to secure the Counter Cover to the Handle side Plate. Two are required...

OKUMA 0930194, 0930195, & 0930609 CLUTCH CAM SLIDER & CLICK BUTTON SCREW *Screw numbers 0930194, 0930195, 0930609, 03312X5-617 & 03312X3.5-61 are all the same part that were just assigned a...

OKUMA 0930732 CLUTCH BAR SCREW

OKUMA 29000002 & 63205901 'E' RETAINER *For baitcast reels, this is the 'E' Retainer that is located on the drive side of the Worm Shaft that secures the entire level wind assembly in place. *For conventional star drag...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or silver washer (or shim) that resides inside the Pawl Cap on all level wind equipped reels & is also referred to as the...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball Bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930226 & 0930230 HANDLE NUT PLATE SCREW *Screw numbers 0930226, 0930230, 03412.6x4-61, & 03412.6x5-61 are all the same part that were just assigned a different number over the years. This is...

OKUMA 0930196 CLICK BUTTON SCREW (03312x5-61) This is the Screw that secures the Click pawl to the Click Button. If you intend to use this screw or if your schematics call for use of this screw as a Slider Screw, your...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear Shaft (#701) to the hold plate (#207). This drivegGear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025 & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...