CONVECTOR CV SERIES

OKUMA 16120027 KEY...

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16120045 DOMED KEY WASHER (11612026-06001) This is the Domed metal "Keyed Drag Washer or "Drag Plate" that is always located on the very top of the drag sequence as shown in the...

OKUMA 16140003 DRAG SPRING WASHER This is the Spring Washer that prevents any binding issues between the Star Drag Knob & the Handle arm itself. *Washer numbers 16140001, 16140003, 11614001-06,...

OKUMA 16150132 INDEXED STAR DRAG KNOB ASSEMBLY (1161501801907) CATALINA CT-15C, CT-15D, CT-15L, CT-20C, CT-20D, & CT-20L (Second version) CONVECTOR CV-15C, CV-15CS, CV-15D, CV-15L, CV-20C, CV-20CS, CV-20D, &...

OKUMA 16150133 INDEXED STAR DRAG ASSEMBLY (1161501701907) This "Indexed" Star Drag Knob was intended to work on the second generation larger Convector & Catalina model reels starting in 2010 to present, but can be...

OKUMA 16150136 INDEXED STAR DRAG ASSEMBLY (1161501801907A) Important note! This Indexed Star Drag Knob has a reverse thread & will only work on left hand retrieve reels. CONVECTOR...

OKUMA 16150137 STAR DRAG ASSEMBLY (1161501701907A) *This reverse thread "Indexed" Star Drag Knob was intended to work on the second generation larger Convector model reels starting in 2010 to present, but can be easily...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides between the inside of the Cast Control Cap & the metal End Thrust Washer. We also include this in our Cast Control Kits...

OKUMA 17000027 DRIVE GEAR *Drive Gear numbers 17000027, 17000201, 17000202, 11700006-0321, 11700006-03003, & 1170000603003 are all the same part that were just assigned a different production number that will only...

OKUMA 17000212 DRIVE GEAR *Drive Gear numbers 17000212, 17000213, 11700008-03007, & 1170000803007 are all the same part that were just assigned a different production number. CLASSIC PRO XPD-20DLXa CONVECTOR CV-20DLX...

OKUMA 17000234 BRASS DRIVE GEAR 6.2:1 *Drive Gear numbers 17000234, 17000236, 17000237, & 1170002606002 are all the same part that were either assigned a different production number or have been replaced by...

OKUMA 17000241 DRIVE GEAR (11700027-03002) *This is the same Drive Gear as 17000243, 17000244, & 1170002706002 which is now only manufactured in brass...

OKUMA 17000247 STAINLESS STEEL DRIVE GEAR (1170002806002)

OKUMA 17000247, 17000248, & 17000312 BRASS DRIVE GEAR

OKUMA 17000250 & 17000251 BRASS DRIVE GEAR HIGH SPEED 6...

OKUMA 17000264 DRIVE GEAR *Drive gear numbers 17000261, 17000264, 17000266, 11700031-13002, & 1170003106002 are now all made in brass that are now all the same part, that are just assigned a different...

OKUMA 17010138 DRIVE GEAR SHAFT This Drive Gear Shaft has an overall length of 1.980" (50mm). CONVECTOR CV-45L & CV-55L (1st version pre...

OKUMA 17010144  DRIVE GEAR SHAFT Drive Gear Shaft numbers 17010142, 17010144, 17010146, 1170103406001, & 1170103416001 are all the same part that were just assigned a different production number that has an...

OKUMA 17010187 DRIVE GEAR SHAFT. Drive Gear Shaft numbers 17010187, 17010245, 17010246, 1170104516001, 1170103116001A, & 1170103116001B are all the same part, that were just assigned a different number...

OKUMA 17010194 DRIVE GEAR SHAFT (1170104903002) This Drive Gear Shaft has a reverse thread that will only work on left hand retrieve reels which has an overall length of @ 1.990" (48mm). CONVECTOR CV-30DLX...

OKUMA 17010202 DRIVE GEAR SHAFT (1170105103002) This Drive Gear Shaft has a reverse thread that will only work on left hand retrieve reels that has an overall length of @ 1.900" (48mm). CONVECTOR...

OKUMA 17020243 PINION GEAR *Pinion gear numbers 17020243, 17120244, 11702008032, & 1170200803002 are all the same part that were just assigned a different number that will only work on left hand retrieve...

OKUMA 17020258 STAINLESS STEEL PINION GEAR HIGH SPEED 6.2:1

OKUMA 17020264 BRASS PINION GEAR *This is the current brass version of Pinion Gear numbers 17020265, 17020266, 17020354, 11702030-06002, 11702030062, & 1170203003002. CATALINA CT-55C...

OKUMA 17020264 PINION GEAR *This is the current stailess steel version of Pinion Gear numbers 17020265, 17020266, 17020354, 11702030-06002, 11702030062, & 1170203003002. CATALINA CT-55C...

OKUMA 17020272 PINION GEAR 6.2:1 *Pinion Gear numbers 17020272, 17020275, 17020276, 17020485, 1170203203002, & 1170203206002 are all the same part that were either assigned a different production number...

OKUMA 17020272 STAINLESS STEEL PINION GEAR 6.2:1 *Pinion Gear numbers 17020272, 17020275, 17020276, 17020485, 1170203203002, & 1170203206002 are all the same part that were either assigned a different...

OKUMA 17020279 PINION GEAR *Pinion Gear numbers 17020279, 17020282, 17020285, 17020325, 17020477, 11702033062, 1170203303002, & 1170203306002  are all the same part that is now only manufactured in brass...

OKUMA 17020352 PINION GEAR *Pinion Gear numbers 17020298, 17020352, 17020476, 17020378, 1170203503B2, & 1170203516002 are now all made in brass that are now all the same part, that are just assigned a...

OKUMA 17020318 PINION GEAR *Pinion Gear numbers 17020318, 17020321, 17020329, 11702039032, & 11702039032A are all the same part that were just assigned a different production number that will only work on left hand...

OKUMA 17020383 & 17020489 BRASS PINION GEAR HIGH SPEED 6...

OKUMA 17030006 WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CLARION CLR-303L & CLR-304D CLASSIC PRO CL-300, CL-300L, CL-300LX, CL-302L-CL, & CL-302LX CLASSIC...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, CT45D, & CT-45L CLARION CL-453L, CL-453LS, & CL455D CLASSIC PRO CL-450L & CL-452L CLASSIC PRO XT CLX-450L, CLX-450...

OKUMA 17030008 WORM SHAFT GUARD (11703009-03) AURORA CLASSIC CL-20L CATALINA 205Da, CT-20D, & CT-20L CLARION CLR-203L & CLR-204D CLASSIC PRO CL-200L & CL-202L CLASSIC PRO CLX (XT) CLX-200L &...

OKUMA 17030009 WORM SHAFT GUARD (11703010-03907) CLARION CLR-553L & CLR-553LS COLD WATER CW-553LS CONVECTOR CN-55L, CV-55L, & CV-55LS STAR DRAG...

OKUMA 17030011 WORM SHAFT GUARD (11703011-03001) CATALINA CT-15D & CT-15L CLASSIC PRO CLX (XT) CLX-150La COLD WATER CW-153D CONVECTOR CN-15D, CN-15L, CV-15D, & CV-15L MAGDA PRO MA-15D, MA-15DT,...

OKUMA 17040007 WORM GUIDE SUPPORT BAR (11704004-03907) AURORA CLASSIC CL-45L CLASSIC PRO CL-450, 450L, 452, & 452L CONVECTOR CN-45 & 45L CONVECTOR CV-45D, 45L, & 45LS DIEZEL DZ-45L MAGDA PRO MA-45D &...

OKUMA 17040008 WORM GUIDE SUPPORT BAR (11704005-03907) AVENGER AV-300L CLARION CLR-303L & CLR-304D CLASSIC PRO CL-300, CL-300L, CL-300LX, CL-302L, & CL-302LX CLASSIC PRO XP XPD-30D, XPD-30Da, XPD-30DLX, &...

OKUMA 17040010 WORM GUIDE SUPPORT BAR...

OKUMA 17040012 LINE GUIDE SUPPORT BAR *Support Bar numbers 17040012, 17040021, 11704008-03, & 11704008-03907 are all the same part that were just assigned a different production number AURORA CLASSIC...

OKUMA 17040013 WORM GUIDE SUPPORT BAR *Part numbers 17040013, 17040022, 11704009-03, & 11704009-03907 are all the same part, that were just assigned a different production number. CLASSIC PRO CL-200C &...

OKUMA 17040019 WORM GUIDE SUPPORT BAR (11704004-03001)

OKUMA 17040025 LINE GUIDE SUPPORT BAR...

OKUMA 17040026 WORM GUIDE SUPPORT BAR (11704017-03001) CONVECTOR CV-15D & CV-15D MAGDA PRO MA-15D, MA-15DT, MA-15DX, & MA-15DXT MAGNETICS MG-15LS STRATAMASTER...

OKUMA 17040028 WORM GUIDE SUPPORT BAR (11704019-03001) CLARION CLR-553L & CLR-553LS COLD WATER CW-553LS CONVECTOR CN-55L, CV-55L, & CV-55LS  STAR DRAG...

OKUMA 17050011 WORM SHAFT TRANSMISSION GEAR (11705006-06) This is the steel Transmission Gear that resides on the end of the Worm Shaft that is located on the Clicker side of the reel. This is also referred to as the...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel Transmission Gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17050015 TRANSMISSION GEAR (11705009-32) *This is the Transmission Gear that is secured to the end of the Worm Shaft by 'E' Retainer 29000001 that is located on the clicker side of the reel. CLARION CLR-553L...

OKUMA 17050016 WORM SHAFT TRANSMISSION GEAR (11705011-06001) This is the metal Transmission Gear that is located on the drive side of DLX Left Hand Retrieve series reels that resides under black plastic conical...

OKUMA 17050017 TRANSMISSION GEAR (11705010-06001) *On level wind equipped reels, this is the Transmission gear that resides on the Spool shaft on the clicker side of the reel that is secured with 'C' Retainer 29000006...

OKUMA 17060003 TRANSMISSION GEAR (11706002-06) *This is the small Transmission Gear that resides on the end of the spool shaft on the clicker side of the reel. This Gear may arrive in either a cast steel or brass finish...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel Transmission Gear that resides on the end of the spool axle shaft on the clicker side of the reel that is secured be 'C' retainer #19000001...

OKUMA 17060007 TRANSMISSION GEAR (11706004-06001) This is the steel Transmission Gear that resides on the end of the spool axle shaft above the spool click gear on depthcounter equipped left hand retrieve reels. COLD...

OKUMA 17070004 TRANSMISSION GEAR (11707003-01) This is the Transmission Gear that is located on the clicker side of the reel that is secured with one Phillips Screw to the side cover & is also referred to as...

OKUMA 17070009 TRANSMISSION GEAR (11707008-11) This is the "stepped" Transmission Gear that is located under the Click Pawl Spring that is secured to the Vice Side Plate with one small Phillips screw & is also referred...

OKUMA 17070010 TRANSMISSION GEAR (11707009-06001) This is the "stepped" metal Transmission gear that is secured to the clicker side plate that drives the steel gear secured to the Worm Shaft. CLARION CLR-553L...

OKUMA 17070011 TRANSMISSION GEAR (11707010-01001) This Transmission Gear was made specifically for the left hand retrieve DLX Series reels & may arrive in either black or white molded plastic. COLD WATER CW-153DLX,...

OKUMA 17080007 TRANSMISSION GEAR (11708007-06001) This is the Transmission gear that drives the "stepped" metal Transmission gear that are secured to the clicker side plate that drives the steel gear secured...

OKUMA 17080014 TRANSMISSION GEAR *Transmission Gear numbers 17080014, 17080015, 1708008-01001, & 1708009-01001 are all the same part that were just assigned different numbers over the years. **This is the...

OKUMA 17090004 TRANSMISSION GEAR BUSHING *Bushing numbers 17090004, 17090017, 11709002-03, & 1170900201 are all the same part that were just assigned a different production number...

OKUMA 17090014 TRANSMISSION GEAR...

OKUMA 17090015 TRANSMISSION GEAR...

OKUMA 17100019 "WIDE MOUTH" LINE GUIDE ASSEMBLY (117100110691) A FULL 1/8" CLEARANCE FOR COPPER RIGS! CLARION CLR-553L & CLR-553LS COLD WATER CW-553LS CONVECTOR CN-55L, CV-55L, & CV-55LS STAR DRAG...

OKUMA 17100045 WIDE MOUTH LINE GUIDE ASSEMBLY This Line Guide Assembly is now the replacement or upgrade for numbers 17100030, 17100045, 17100046, 1171001306917, 1171001306002, & 1171001406002. A full...

OKUMA 17100032 "WIDE MOUTH" LINE GUIDE ASSEMBLY (1171001406917) A FULL 1/8" CLEARANCE FOR COPPER RIGS! CATALINA CT-455Da, CT-45D, & CT-45L CLARION CLR-453L, CLR-453LS, & CLR-454D COLD WATER...

OKUMA 17100044 LINE GUIDE (1171001206917) A full 1/8" clearance for copper rigs! CATALINA CT-15D & CT-15L CLARION CLR-203L & CLR-204D CLASSIC PRO XPD-20D COLD WATER CW-153D, CW-153DLX, CW-153DLXm, CW-203D,...

OKUMA 17120014 WORM SHAFT *Worm Shaft numbers 17120019, 17120020, 17120055, 11712005-03, & 11712010-13907 are all the same part that were just assigned different production numbers. AURORA CLASSIC CL-30L...

OKUMA 17120021 WORM SHAFT *Worm Shaft numbers 17120021, 17120089, & 11712011-03907 are all the same part that were just assigned a different number over the years. AURORA CLASSIC CL-45L CATALINA...

OKUMA 17120026 WORM SHAFT *Worm Shaft numbers 17120026, 17120051, 17120062, 1171203701, & 11712019-03 are all the same part that were just assigned a different production number over the years. AURORA...

OKUMA 17120032 WORM SHAFT (11712023-03001) CATALINA CT-15L CLASSIC PRO CLX-150La CONVECTOR CN-15L &...

OKUMA 17120035 WORM SHAFT (11712026-03001) If you need a Worm Shaft for any Okuma 55 or 553 Series level wind reel, this is it! CLARION CLR-553L & CLR-553LS COLD WATER CW-553LS CONVECTOR CN-55L CONVECTOR CV-55L...

OKUMA 17120037 WORM SHAFT *Worm Shaft numbers 17120037, 17120080, & 11712029-03001 are all the same part that were just assigned a different production number. CATALINA CT-30D & CT-305Da CLARION...

OKUMA 17120038 WORM SHAFT *Worm Shaft numbers 17120038, 17120081, & 11712030-03001 are all the same part that were just assigned a different production number. Contrary to what our competitors may claim, this Worm...

OKUMA 17120039 WORM SHAFT (11712031-03001) CATALINA CT-15D  CONVECTOR...

OKUMA 17120040 & 17120083 WORM SHAFT (11712032-03001) CATALINA CT-205Da & CT-20D CLARION CLR-204D CONVECTOR...

OKUMA 17120042 WORM SHAFT (11712034-03001) *This Worm Shaft will only work on left hand retrieve model reels only. CONVECTOR CV-20DLX MAGDA...

OKUMA 17120043 & 17120079 WORM SHAFT (11712035-03001) *This Worm Shaft will only work on left hand retrieve model reels. CLASSIC PRO XPD XPD-30DLX & XPD-30DLXa COLD WATER...

OKUMA 17130001 LINE GUIDE PAWL CAP Pawl Cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 17200005 DRIVE GEAR SHAFT...

OKUMA 17200006 DRIVE GEAR SHAFT BUSHING (11720006-06001) *This Drive Gear Shaft Bushing has an overall length of .563" (@ 9/16" or 14...

OKUMA 17240001 CLICK PAWL RATCHET (11724001-06001) This is the "Click Pawl or "Click Ratchet" that is mounted on the clicker side of the Spool that is located just under the Transmission Gear #17050017...

OKUMA 18000014 CLUTCH CAM / CLUTCH SHAFT Clutch Cam numbers 18000012, 18000014, 11800004-02002, & 11800004-12002 are all the same part, that were just assigned a different production number...

OKUMA 18000018 CLUTCH CAM *Clutch Cam numbers 18000016, 18000017, 18000018, 11800005-02001, 11800005-02002, & 111800005-12001 are all the same part, that were just assigned a different production number...

OKUMA 18010001 CLUTCH SPRING...

OKUMA 18010007 CLUTCH SPRING...

OKUMA 18010009 CLUTCH SPRING *Clutch Spring numbers 18010009, 18010010, & 11801007-06001 are all the same part that were just assigned a different number that will only work on Left Hand retrieve model reels...

OKUMA 18010011 CLUTCH SPRING (11801008-06001) CLASSIC PRO XPD-20DLXa CONVECTOR CV-20DLX MAGDA MA-20DLX &...

OKUMA 18010013 CLUTCH...

OKUMA 18020001 CLUTCH BAR (11802003-01) CLASSIC PRO CL-200C, CL-200L, CL-202, CL-202C, CL-202L, CL-300, CL-300C, CL-300L, CL-300LX, CL-302C, CL-302L, & CL-302LX CLASSIC PRO XT CLX-150La, CLX-200L, CLX-200La, CLX-300L,...

OKUMA 18020015 CLUTCH BAR (11802004-01) CLASSIC PRO CL-450, CL-450C, CL-450L, CL-452, CL-452C, CL-452L, CL-552, & CL-552W CLASSIC PRO XT CLX-450L, CLX-450La, CLX-450LX, CLX-452L, CLX-452La, CLX-452LX, &...

OKUMA 18040006 CLUTCH CAM SLIDER (11804006-06) CLASSIC PRO CL-300LX & CL-302LX CLASSIC PRO XT CLX-300LX, CLX-302LX, CLX-300LXa, CLX-450LX, CLX-452LX, & CLX-452LXa CLASSIC PRO XPD XPD-30DLX &...

OKUMA 18040007 CLUTCH CAM SLIDER (11804007-06001) CATALINA CT-55C, CT-55N, & CT-55W CLARION CLR-553L & CLR-553LS CLASSIC PRO CL-552 & CL-552W COLD WATER CW-553LS CONTOURA CR-553 & CR-603...

OKUMA 18040008 CLUTCH CAM SLIDER (011804008-06001) CATALINA CT-25C, CT-25CS, CT-25D, CT-25L, CT-30C, CT-30CS, CT-30D, CT-30L, CT-45C, CT-45D, CT-45L, CT-305Da, & CT-455Da CLARION CLR-303L, CLR-304D, CLR-453L,...

OKUMA 18040009 CLUTCH CAM SLIDER (11804009-06001) ALC-MAG ALC-20CS CATALINA CT-15C, CT-15D, CT-15L, CT-20C, CT-20D, & CT-20L CLARION CLR-203L & CLR-204D COLD WATER CW-153D & CW-203D CONTOURA...

OKUMA 18040010 CLUTCH CAM SLIDER (11804012-06001) CLASSIC PRO XPD XPD-20DLX CONVECTOR CV-15DLX & CV-20DLX MAGDA PRO MA-15DLXT, MA-20DLX, &...

OKUMA 18050001 PINION GEAR YOKE (11805001-06) AURORA CLASSIC CL-30L & CL-45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, CL-300L, CL-300LX, CL-302L, CL-302LX, CL-450, CL-450C, CL-450L, CL-452, CL-452C,...

OKUMA 18050003 PINION GEAR YOKE If you are intending to use this part on any reel other than a 55, 553, or 603 size reel, please click here instead. The number that is shown on most of the parts diagrams is incorrect &...

OKUMA 18050004 PINION GEAR YOKE...