CVL-30B

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA 11170032 HANDLE RETAINER NUT CATALINA 'A' SERIES CT-30DA & 45DA BIG LAKE TROLLING BLT-30D COLD WATER CW-153D, 153DLX, 153DLXm, 203D, 203DLX, 203DLXm, 303D, 303DS, 303DLX, 453D, & 453DS CONVECTOR 'B'...

OKUMA 12430003 COMPRESSION SPRING This is the compression spring that resides between the threaded star drag Bushing & the star drag key washer. BIG LAKE TROLLING BLT-30D COLD WATER CW-153D, 153DLX, 153DLXm,...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 16120099 KEY...

OKUMA 15160042 HANDLE NUT RETAINER BIG LAKE TROLLING BLT-30D & 30DX CATALINA A SERIES CT-30DA & 45DA COLD WATER CW-153D, 153DLX, 153DLXm, 203D, 203DLX, 203DLXm, 303D, 303DS, 303DLX, 453D, &...

OKUMA 16040011 DRAG CLICK

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16160012 STAR DRAG BUSHING CATALINA A SERIES CT-30DA & 45DA BIG LAKE TROLLING BLT-30D COLD WATER CW-153D, 203D, 203D-LE, 303D, 303DS, 453D, & 453DS CONVECTOR 'B' SERIES LINE...

OKUMA 13020025 WASHER (1130201301) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050003, 13050006, 13050012, & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been...

OKUMA 16090002, 16090003, 16090004*, 16090009, & 16090024 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 16090024, 11609003-05907,11609003-06001, 11609003-06002,...

OKUMA 16110037 & 16110045 EARED WASHER (1161101201 &...

OKUMA 16120087 KEY WASHER This is the key washer that resides between the star drag knob & the compression spring...

OKUMA 16120047 KEY WASHER (11612029-06001) This is the washer that resides on the drive shaft between the handle assembly & the black plastic drag click. This key washer is identified as Key...

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CATALINA CT-30D, 30L, & 305Da CATALINA A SERIES CT-30DA CLARION CLR-303L &...

OKUMA 17040036 WORM / LINE GUIDE SUPPORT BAR (11704025-06002) *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." CATALINA A SERIES CT-30DA CLASSIC PRO XT...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17070004 & 17070023 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is...

OKUMA 17120088 WORM SHAFT *Please examine the worm shaft you are replacing closely & compare it to the one in the photographs as there has been a design change on the Convector CV-30L. This worm shaft...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 17200005 DRIVE GEAR SHAFT...

OKUMA 18000012 & 18000014* CLUTCH CAM / CLUTCH SHAFT Clutch cam numbers 18000012, 18000014, 11800004-02002, & 11800004-12002 are all the same part, that were just assigned a different production...

OKUMA 18010007 & 18010012* CLUTCH SPRING (11801005-06001) AVENGER AV-300L CATALINA 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da CLASSIC PRO CLX (XT)...

OKUMA 0930732 CLUTCH BAR SCREW

OKUMA 18040008* &18040015 CLUTCH CAM SLIDER (011804008-06001) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 305Da, & 455Da CATALINA A SERIES CT-30DA & 45DA CEDROS CSD-10,...

OKUMA 18050004 PINION GEAR YOKE (11805004-06001) *On some parts diagrams this may also be referred to as the "clutch yoke". BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D,...

OKUMA 18060004 YOKE SPRING (1180600102)

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 0920076 WASHER (023.5x6x0.5-3) BAITCAST REELS: This is the washer that resides under the 'E' retainer that secures the clutch bar support in place. STAR DRAG REELS: This is the washer that is found...

OKUMA 0930060 SIDE PLATE SCREW (03122.6x9-61)

OKUMA 0920111 WASHER (025.1x11.5x.5-6) This is the washer that generally resides between the yoke brake plate & the hold plate bushing...

OKUMA 0930585 SCREW (03723x11.5-61) This is the Screw that secures the Handle Side Plate to the Main Body Assembly...

OKUMA 0930588 SCREW (03223x12-61) This is the screw that secures the vice side plate (click side cover) to the main body...

OKUMA 0930448 SCREW...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0920154 DRIVE GEAR WASHER (028.1x12x0.5-6)

OKUMA 0920326 STAR DRAG KNOB FRICTION WASHER (028.1x12x0.5-0) This is the washer that is located between the star drag knob & the click gear index...

OKUMA 0930194, 0930195, & 0930609* SCREW (03312X5-617 & 03312X3.5-61) *Screw numbers 0930194, 0930195, 0930609, 03312X5-617, & 03312X3.5-61 are all the same part that were just assigned a different...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...