CLASSIC PRO XP SERIES

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA CLASSIC PRO CAST CONTROL CAP 16000093 & 16000108 (11600029-01001) This is the newer upgraded steel cap that replaces the older more "breakable" black plastic unit! CLASSIC PRO CLX XT CLX-150La,...

OKUMA 16000038 CAST CONTROL CAP (11600014-03001) This cast control cap is for right hand retrieve reels only & will not work on any DLX or LX left hand retrieve reels. For that application click here. Also, this...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA 11050006 WORM SHAFT BUSHING (11105003-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11170010, 11170012*, & 41170001 10mm HANDLE RETAINER NUT *Part numbers 11170010, 11170012, 41170001, 14117001-03, & 11117007-03001 are all the same part that were just assigned a different...

OKUMA  12010011 ANTI REVERSE PAWL (11201008-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-150, 200C, 200C, 202, 202C, & 202L CLASSIC PRO CLX (XT) CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L &...

OKUMA 12010001, 12010057, & 12010089 ANTI REVERSE PAWL (11201001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, 300C, 300L, 300LX, 300LXAG, 302C, 302L, 302LX,...

OKUMA 12070096 HOLD PLATE CLASSIC PRO XP-452C MAGDA PRO MA-45D, 45DX, & 45DXT STRATAMASTER...

OKUMA 12070095 HOLD PLATE CLASSIC PRO XT CLX-200L & 200La CLASSIC PRO XP XP-202L &...

OKUMA 12070092 HOLD PLATE (11207057-01001) CLASSIC PRO XT CLX-300L, 300La, 302L, & 302La CLASSIC PRO XP XP-302L &...

OKUMA 12070090 HOLDED PLATE (11207055-01001) CLASSIC PRO XT CLX-450L, 450La, 452L, & 452La CLASSIC PRO XP XP-452L &...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12110021 ANTI REVERSE PAWL PIN

OKUMA 12110009 ANTI REVERSE PAWL PIN (11211003-03001) AURORA CLASSIC CL-20L CLASSIC PRO CL-150L 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO...

OKUMA 12150029 HOLD PLATE BUSHING (11215031-0115) This is the small white or black bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12150030 HOLD PLATE BUSHING (11215031-0114) This is the white bushing that resides on the spool shaft on the drive side of the reel that is secured by 'C' retainer #29000006...

OKUMA 12160003 ANTI-RE PAWL SPRING (11216002-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-200L CONVECTOR CN-15C, 15D, 15L, 20C, 20D, &...

OKUMA 12160001, 12160002, 12160010, & 12160018* ANTI REVERSE PAWL SPRING *Part numbers 12160001, 12160002, 12160010, 12160018, 11216001-06, & 11216001-06001 are all the same part that...

OKUMA 15160001 & 15160002* HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different...

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This drive gear shaft bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 13030045 & 13030048 CLICK BUTTON Click button numbers 13030045, 13030048, 11303010-13907, & 11303010-03907 are all the same part that were just assigned a different number & fit all the reels...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050003, 13050006, 13050012, & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been...

OKUMA 14010051 SPOOL CLICK GEAR  Please examine the part you are replacing closely & compare it to the one in the picture as there has been a recent design change. If it does not look like the one in the picture,...

OKUMA 14010052 SPOOL CLICK GEAR  Please examine the part you are replacing closely & compare it to the one in the picture as there has been a recent design change. If it does not look like the one in the picture,...

OKUMA 16090002, 16090003, 16090004*, 16090009, & 16090024 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 16090024, 11609003-05907,11609003-06001, 11609003-06002,...

OKUMA 16110005 & 16110006 EARED...

OKUMA 16120027 KEY...

OKUMA 16120029 KEY...

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the spring washer that prevents any binding issues between the star drag knob & the handle arm itself. *Washer numbers 16140001,...

OKUMA 16150009 & 16150202 STAR DRAG KNOB (11615003-01001) *Please note that this will work just fine as a replacement for the Okuma Searay SR-20L (#16150016) if you don't mind the color! AURORA...

OKUMA 16150021 STAR DRAG (11615005-01001) AURORA CLASSIC CL-30L & 45L CLASSIC PRO CL-300, 300C, 300L, 302C, 302L, 450, 450C, 450L, 452, 452C, 452L, 552, & 552W CLASSIC PRO XT CLX-300L, 300La, 302L, 302La,...

OKUMA 16170018 DRIVE GEAR SHAFT BUSHING (INNER) *Drive gear shaft bushing numbers 16170018, 11617006-01, & 11617015-03 are all the same part that were just assigned a different production number. **This drive...

OKUMA 16170008 & 16170023 DRIVE GEAR SHAFT BUSHING (OUTER) Bushing numbers 16170008, 16170023, 11617005-03, 11617018-01001, & 11617006-01002 are all the same part that were just assigned a different...

OKUMA 13020014 & 13020015 WASHER (11302002-06001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17010073 DRIVE GEAR SHAFT (170101623001C) This drive gear shaft has an overall length of approx. 1.735" (44mm). CLASSC PRO XT CLX-300L, 300La, 302L, 450L, 450La, & 452L CLASSIC PRO XP XP-302L,...

OKUMA 17010065 & 17010068 DRIVE GEAR SHAFT Drive gear shaft numbers 17010065, 17010068, 1170100903001, & 1170100913001 are all the same part, that were just assigned a different number which has an...

OKUMA 17010079 DRIVE GEAR SHAFT This drive gear shaft is equipped with the "Auto Trip®" lug & has an overall length of approx. 1.735" (44mm). CLASSC PRO CLX CLX-300L, 300La, 302L, 302La, 450L, 450La, 452L,...

OKUMA 17010071 & 17010075 DRIVE GEAR SHAFT Drive gear shaft numbers 17010071, 17010075, & 1170101603001 are all the same part that were just assigned a different production number that has an overall...

OKUMA 17020023, 17020322*, & 17020237 PINION GEAR *Pinion gear numbers 17020023, 170200322, 17020237, 11702005-061, 17020237, 11702005-061, 11702037-06001, & 1170203706002 are all the same part,...

OKUMA 17030008 WORM SHAFT GUARD (11703009-03) AURORA CLASSIC CL-20L CATALINA CT-205Da, 20D, & 20L CLARION CLR-203L & 204D CLASSIC PRO CL-200L & 202L CLASSIC PRO CLX (XT) CLX-200L &...

OKUMA 17030005 WORM SHAFT GUARD (11703006-03907) AURORA CLASSIC CL-45L CATALINA CT-455Da, 45D, & 45L CATALINA A SERIES CT-45DA CLARION CLR-453L, 453LS, & 454D CLASSIC PRO CL-450L & 452L CLASSIC...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CATALINA CT-30D, 30L, & 305Da CATALINA A SERIES CT-30DA CLARION CLR-303L &...

OKUMA 17040038 LINE GUIDE SUPPORT BAR *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." CLASSIC PRO CLX-200L & 200La CLASSIC PRO XP XP-202L &...

OKUMA 17040036 WORM / LINE GUIDE SUPPORT BAR (11704025-06002) *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." CATALINA A SERIES CT-30DA CLASSIC PRO XT...

OKUMA 17040037 WORM GUIDE SUPPORT BAR (11704025-06001) *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." CATALINA A SERIES CT-45DA CLASSIC...

OKUMA 17040025 LINE GUIDE SUPPORT BAR (11704016-03001) *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." CLASSIC PRO CL-450C & 452C CLASSIC PRO XP...

OKUMA 17050011 WORM SHAFT TRANSMISSION GEAR (11705006-06) This is the steel transmission gear that resides on the end of the worm shaft that is located on the clicker side of the reel. This is also referred to as...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060003 TRANSMISSION GEAR (11706002-06) *This is the small transmission gear that resides on the end of the spool shaft on the clicker side of the reel. This gear may arrive in either a cast steel or brass finish...

OKUMA 17060009 TRANSMISSION GEAR (11706005-0114) This is the transmission gear that resides on the end of the spool axle shaft on the clicker side of the reel that is secured be 'C' retainer #19000001. Please note...

OKUMA 17070004 & 17070023 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is...

OKUMA 17070009 TRANSMISSION GEAR (11707008-11) This is the "stepped" transmission gear that is located under the click pawl spring that is secured to the vice side plate with one small Phillips screw & is also referred...

OKUMA 17120026, 17120051, & 17120062 WORM SHAFT *Please examine the worm shaft you are replacing closely & compare it to the one in the photographs as there has been a design change on the Convector CV-20L...

OKUMA 17120021 WORM SHAFT (11712011-03907) *Please examine the worm shaft you are replacing closely & compare it to the one in the photographs as there has been a design change on the Convector CV-45L. This...

OKUMA 17120014, 17120019, 17120020*, & 17120055 WORM SHAFT *Worm shaft numbers 17120014, 17120019, 17120020, 17120055, 11712005-03, & 11712010-13907 are all the same part that were just...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 17130004 LINE GUIDE PAWL CAP (11713002-01001) CLASSIC PRO CLX SERIES CLX-200L, 300L, 300La, 300LX, 300LXa, 300LXaG, 302L, 302La, 302LX, 302LXa, 450L, 450La, 450LX, 452L, 452La, 452LX, & 452LXa CLASSIC PRO XP...

OKUMA 18000005 & 18000008* CLUTCH CAM Clutch cam numbers 18000005, 18000008, 11800002-02002, & 11800002-12002 are all the same part, that were just assigned a different production number which is also...

OKUMA 18000021 CLUTCH CAM / CLUTCH SHAFT (11800006-01001) CLASSIC PRO XT CLX-300L, 302L, 450L, & 452L CLASSIC PRO XP-202L, 302L, &...

OKUMA 18000012 & 18000014* CLUTCH CAM / CLUTCH SHAFT Clutch cam numbers 18000012, 18000014, 11800004-02002, & 11800004-12002 are all the same part, that were just assigned a different production...

OKUMA 18010001 CLUTCH SPRING (11801001-06) AURORA CLASSIC CL-20L, 30L, & 45L CATALINA CT-55C, 55N, & 55W CATALINA 'A' SERIES CTL-55HA CLARION CLR-553L & 553LS CLASSIC PRO CL-150, 200C, 200L,...

OKUMA 18010007 & 18010012* CLUTCH SPRING (11801005-06001) AVENGER AV-300L CATALINA 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da CLASSIC PRO CLX (XT)...

OKUMA 18020015 CLUTCH BAR (11802004-01) CLASSIC PRO CL-450, 450C, 450L, 452, 452C, 452L, 552, & 552W CLASSIC PRO XT CLX-450L, 450La, 450LX, 452L, 452La, 452LX, & 452LXa CLASSIC PRO XP XP-452C, 452L &...

OKUMA 18020001 CLUTCH BAR (11802003-01) CLASSIC PRO CL-150, 200C, 200L, 202, 202C, 202L, 300, 300C, 300L, 300LX, 302C, 302L, & 302LX CLASSIC PRO XT CLX-150La, 200L, 200La, 300L, 300La, 300LX, 300LXa, 300LXaG,...

OKUMA 0930732 CLUTCH BAR SCREW

OKUMA 18040013 CLUTCH CAM SLIDER *Please examine the part you are replacing closely & compare it to the one in the photos, If it doesn't look like the on in the pictures, click here for the correct part as there are two...

OKUMA 18040004 CLUTCH CAM SLIDER (11804004-06) AURORA CLASSIC CL-20L CLASSIC PRO CL-200C, C200L, 202, 202C, & 202L CLASSIC PRO XT CLX-200L CLASSIC PRO XP XP-202L CONVECTOR CN-15C, 15L, 20C, & 20L DIEZEL...

OKUMA 18040001 CLUTCH CAM SLIDER (11804001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L, 302LX, 450, 450C, 450L, 452, 452C, & 452L CLASSIC...

OKUMA 18050002 PINION GEAR YOKE (11805002-01) AURORA CLASSIC CL-20L CLASSIC PRO CL-150L, 200C, 200L, 202, 202C, & 202L CLASSIC PRO XT CLX-150La, 200L, & 200La CLASSIC PRO XP XP-202L & 202La CLASSIC PRO XPD...

OKUMA 18050001 PINION GEAR YOKE (11805001-06) *On some parts diagrams this may also be referred to as the "clutch yoke". AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L,...

OKUMA 18060001, 18060002, & 18060003* YOKE SPRING *Yoke spring numbers 18060001, 18060002, 18060003, 11806001-06, & 11806001-061 are all the same part that were just assigned a different...

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic transmission gear (#706) in...

OKUMA 0920151* & 0920317 DRIVE GEAR WASHER

OKUMA 0920105 WASHER (025.1X10.5X...

OKUMA 0920279 TRANSMISSON GEAR WASHER (025.1x10.5x.1-6) This is the washer that resides between the spool click gear & the small transmission gear...

OKUMA 0920108 WASHER (025.1x10...

OKUMA 0930229 SCREW (03412.6x5.5-617) On star drag reels this is the screw that secures the handle nut retainer to the actual handle itself. On spinning reels this is the screw that secures the pinion bearing fixed...

OKUMA 0930900 SIDE PLATE SCREW 03423.0x10...

OKUMA 0920166 DRIVE GEAR SHAFT...

OKUMA 0920076 WASHER (023.5x6x0.5-3) BAITCAST REELS: This is the washer that resides under the 'E' retainer that secures the clutch bar support in place. STAR DRAG REELS: This is the washer that is found...

OKUMA 09301022 SCREW (03325.2x2x3-61)

OKUMA 09301140 CLUTCH CAM SCREW (03429...

OKUMA 0930211 SCREW (03325.2x2x5-61)

OKUMA 0920315 WASHER (027x8x0...

OKUMA 0920283 WASHER (025.1x8x0.5-6) *On star drag reels: this is the washer that resides between the base of the drive gear shaft & the bronze hold plate bushing. *On lever drag reels: this is the washer that resides...

OKUMA 0930501 SPOOL CLICK GEAR SCREW (03212x5-617) This is the small screw that attaches the spool click gear to the actual spool itself. Two are required...

OKUMA 0930799 SCREW (03423x12-62)

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930588 SCREW (03223x12-61) This is the screw that secures the vice side plate (click side cover) to the main body...

OKUMA 0930448 SCREW...