CN-30LX

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA 16000050* CONTROL CAP (11600015-03001) *Please note that this cast control cap has reverse threads & will not work on any right hand retrieve reels. CONVECTOR CN / CV-30DLX & 30LX MAGDA MA-30DLX SCHEELS...

OKUMA 16000023, 16000035, & 16000039* CAST CONTROL CAP Cast control cap numbers 16000023, 16000035, 16000039*, & 11600014-03001B are all the same part that were just assigned a different...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA 11050006 WORM SHAFT BUSHING (11105003-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 11170013 10mm HANDLE NUT (11117005-03002) This nut has a reverse thread & will only work on left hand retrieve model reels only. If you need a standard thread nut, please click here...

OKUMA 12010001, 12010057, & 12010089 ANTI REVERSE PAWL (11201001-06) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, 300C, 300L, 300LX, 300LXAG, 302C, 302L, 302LX,...

OKUMA 12070046 HOLD PLATE (11207011-03001) AVENGER AV-300L (1st Generation) AURORA CLASSIC CL-30L CLASSIC PRO CL-300, 300C, 300L, 302C, & 302L (1st Generation) CONVECTOR CN-30C, 30D, & 30L DIEZEL DZ-30D &...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12240004 & 12240017 ONE WAY BEARING CUP...

OKUMA 12110008 & 12110034 ANTI REVERSE PAWL PIN (11211002-03001) AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C,...

OKUMA 12160001, 12160002, 12160010, & 12160018* ANTI REVERSE PAWL SPRING *Part numbers 12160001, 12160002, 12160010, 12160018, 11216001-06, & 11216001-06001 are all the same part that...

OKUMA 15160001 & 15160002* HANDLE NUT RETAINER Retainer numbers 15160001, 15160002, 11516001-01 & 11516001-011 are all the same part that were just assigned a different...

OKUMA 13020002 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16170002 DRIVE GEAR SHAFT BUSHING (11617005-03) *This drive gear shaft bushing has an overall length of .1875" (@ 3/16" or 4...

OKUMA 13030005 CLICK BUTTON (11303004-03907)

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050002 & 13050007* CLICK PAWL SPRING (PLASTIC) *Click pawl spring numbers 13050002, 13050007, 11305001-01001, & 11305001-01003 are all the same part that were just assigned a different...

OKUMA 13050003, 13050006, 13050012, & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been...

OKUMA 16110005 & 16110006 EARED...

OKUMA 46120002 DOMED KEY WASHER (11612007-06001)

OKUMA 16120027 KEY...

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the spring washer that prevents any binding issues between the star drag knob & the handle arm itself. *Washer numbers 16140001,...

OKUMA 16150048 STAR DRAG CONVECTOR CN-30LX *Star Drag numbers 16150048, 16150056, 11615007-04004B, & 11615007-04002B are all the same part that were just assigned a different number that will only work on the...

OKUMA 13020014 & 13020015 WASHER (11302002-06001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17010103 DRIVE GEAR SHAFT (1170102313001) This drive gear shaft has a reverse thread that will only work on left hand retrieve reels which has an overall length of @ 1.890" (48mm). CONVECTOR...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CATALINA CT-30D, 30L, & 305Da CATALINA A SERIES CT-30DA CLARION CLR-303L &...

OKUMA 17040008 LINE GUIDE SUPPORT BAR (11704005-03907) *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel transmission gear that resides on the end of the spool shaft on the clicker side of the reel that is secured be 'C' retainer #19000001. AURORA...

OKUMA 17070004 & 17070023 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is...

OKUMA 17120014, 17120019, 17120020*, & 17120055 WORM SHAFT *Worm shaft numbers 17120014, 17120019, 17120020, 17120055, 11712005-03, & 11712010-13907 are all the same part that were just...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 18000009 CLUTCH CAM / CLUTCH SHAFT *Clutch cam numbers 18000009, 18000011, 11800003-02002, & 11800003-12002 are all the same part that were just assigned a different production number. CLASSIC PRO CL-300LX...

OKUMA 17200002 DRIVE GEAR SHAFT BUSHING (11720002-06001) *This drive gear shaft bushing has an overall length of .5165" (just a hair over 1/2" or 13...

OKUMA 18010003 CLUTCH SPRING (11801003-06) CLASSIC PRO CL-300LX & 302LX CONVECTOR CN-30LX STAR DRAG...

OKUMA 18020011 CLUTCH BAR (11802003-0183) CONVECTOR CN-15C, 15L, 20C, 20L, 30C, 30CS, 30L, &...

OKUMA 0930732 CLUTCH BAR SCREW

OKUMA 18040006 CLUTCH CAM SLIDER (11804006-06) CLASSIC PRO CL-300LX & 302LX CLASSIC PRO XT CLX-300LX, 302LX, 300LXa, 300LXaG, 450LX, 452LX, & 452LXa CLASSIC PRO XPD XPD-30DLX, 30DLXa, & 30DLXG CONVECTOR...

OKUMA 18050001 PINION GEAR YOKE (11805001-06) *On some parts diagrams this may also be referred to as the "clutch yoke". AURORA CLASSIC CL-30L & 45L AVENGER AV-300L CLASSIC PRO CL-300, CL-300C, 300L, 300LX, 302L,...

OKUMA 18060001, 18060002, & 18060003* YOKE SPRING *Yoke spring numbers 18060001, 18060002, 18060003, 11806001-06, & 11806001-061 are all the same part that were just assigned a different...

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic transmission gear (#706) in...

OKUMA 0930171 SCREW (03222.6X4.5-61) On conventional star drag reels this screw is used to secure the one way bearing cup to the handle side plate. On spinning reels this screw is used to secure the transmission...

OKUMA 0920283 WASHER (025.1x8x0.5-6) *On star drag reels: this is the washer that resides between the base of the drive gear shaft & the bronze hold plate bushing. *On lever drag reels: this is the washer that resides...

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the washer that generally resides on the worm shaft between the worm shaft bushing & 'E' clip on the handle side of the reel...

OKUMA 0920162 WASHER (028x10x0...

OKUMA 0920111 WASHER (025.1x11.5x.5-6) This is the washer that generally resides between the yoke brake plate & the hold plate bushing...

OKUMA 0930501 SPOOL CLICK GEAR SCREW (03212x5-617) This is the small screw that attaches the spool click gear to the actual spool itself. Two are required...

OKUMA 0930799 SCREW (03423x12-62)

OKUMA 0930618 DRIVE GEAR SHAFT SCREW (03319.4x3x7-611) This Screw has a reverse or left hand thread which was made exclusively for the left hand retrieve DLX & LX model reels...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930588 SCREW (03223x12-61) This is the screw that secures the vice side plate (click side cover) to the main body...

OKUMA 0920291 WASHER (025.9x10x0...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0930219 CLICK PAWL SPRING & HOLD PLATE MOUNTING SCREW (03327.5x2...

OKUMA 0910321 BALL BEARING (01030625-61) Inner Dia.. 3mm  Outer Dia. 6mm   Thickness 2...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0930194, 0930195, & 0930609* SCREW (03312X5-617 & 03312X3.5-61) *Screw numbers 0930194, 0930195, 0930609, 03312X5-617, & 03312X3.5-61 are all the same part that were just assigned a different...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930226* & 0930230 HANDLE NUT PLATE SCREW *Screw numbers 0930226, 0930230, 03412.6x4-61, & 03412.6x5-61 are all the same part that were just assigned a different number over the years. This is...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...