CT-30DA

OKUMA ARS-2 NEOPRENE REEL COVER FOR 10/15 LEVER DRAGS & 30/40/300/450 STAR DRAG REELS Okuma Reel Shield Neoprene Reel Covers are seam-sealed, waterproof, neoprene reel covers that keep reels and drags dry and...

DAIWA HB-1 PRECISION REEL OILER (64110100) Handy one drop lube in a convenient tube with a pocket clip and fits perfectly in your tackle...

SHIMANO A -DRAGGRC 1 OZ. DRAG GREASE

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

6.2:1 HIGH SPEED GEAR CONVERSION SET CATALINA CT-25C, 25D, 25L, 30C, 30D, 30L, 45C, 45D, 45D, 45L, 305Da, & 455Da CATALINA A SERIES CT-30DA & 45DA CLARION CLR-303L, 304D, 453L, & 454D COLD...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA 16000146 CAST CONTROL CAP & SHIM KIT CATALINA A SERIES CT-30DA & 45DA COLD WATER CW-153D, 203D, 303D, 303DS, 453D, & 453DS COLD WATER LADIES EDITION CW-203D-LE SCHEELS OUTFITTERS SX-153D...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA 11050019 WORM SHAFT BUSHING *Please note that product may arrive in black or white molded plastic...

OKUMA 11050006 WORM SHAFT BUSHING (11105003-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11170032 HANDLE RETAINER NUT CATALINA A SERIES CT-30DA & 45DA BIG LAKE TROLLING BLT-30D COLD WATER CW-153D, 153DLX, 153DLXm, 203D, 203DLX, 203DLXm, 303D, 303DS, 303DLX, 453D, & 453DS MAGDA AIR...

OKUMA 12040016 COMPRESSION SPRING (11204008-06001) *This is the long coil spring that resides at the base of the drive gear shaft that actuates the auto trip mechanism...

OKUMA 12010037 ANTI REVERSE PAWL (11201029-06002) CATALINA CT-305Da & 455Da CATALINA A SERIES CT-30DA & 45DA CEDROS CSD-10, 10S, 12S, & 15S CLARION CLR-303, 304D, 453L, 453LS, & 454D COLD WATER...

OKUMA 12430003 COMPRESSION SPRING This is the compression spring that resides between the threaded star drag Bushing & the star drag key washer. BIG LAKE TROLLING BLT-30D COLD WATER CW-153D, 153DLX, 153DLXm,...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12110021 ANTI REVERSE PAWL PIN

OKUMA 16120099 KEY...

OKUMA 16040011 DRAG CLICK

OKUMA 13020017 & 13020018 WASHER

OKUMA 16160012 STAR DRAG BUSHING CATALINA A SERIES CT-30DA & 45DA BIG LAKE TROLLING BLT-30D COLD WATER CW-153D, 203D, 203D-LE, 303D, 303DS, 453D, & 453DS CORTEZ CZ-5CS &...

OKUMA 46010004* & 46010005 COMPRESSION...

OKUMA 13030079 CLICK BUTTON  CATALINA A SERIES CT-30DA & 45DA COLD WATER CW-153DLX, 203DLX, 303D, 303DLX, 303DS, 453D, & 453DS COLD WATER LADIES EDITION CW-203DLX-LE SCHEELS EXTREME COLD WATER...

OKUMA 13040027 CLICK PAWL

OKUMA 13040001 CLICK PAWL (11304003-06)

OKUMA 13050003, 13050006, 13050012, & 13050015* CLICK SPRING (1130500201) *Please note that the stainless steel version of this click spring has been discontinued in some model Okuma reels & has been...

OKUMA 14010052 SPOOL CLICK GEAR  Please examine the part you are replacing closely & compare it to the one in the picture as there has been a recent design change. If it does not look like the one in the picture,...

OKUMA 16090002, 16090003, 16090004*, 16090009, & 16090024 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 16090024, 11609003-05907,11609003-06001, 11609003-06002,...

OKUMA 16110037 & 16110045 EARED WASHER (1161101201 &...

OKUMA 16120047 KEY WASHER (11612029-06001) This is the washer that resides on the drive shaft between the handle assembly & the black plastic drag click. This key washer is identified as Key...

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17010285 DRIVE GEAR SHAFT CATALINA A SERIES CT-30DA & 45DA COLD WATER CW-303D, 303DS, 453D, & 453DS * This drive gear shaft has an overall length of @ 2.15" (54...

OKUMA 17020282*, 17020285, 17020325* PINION GEAR *Pinion gear numbers 17020282, 17020285, 17020325, , 11702033062, 1170203303002, & 1170203306002  are all the same part that were assigned different part...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CATALINA CT-30D, 30L, & 305Da CATALINA A SERIES CT-30DA CLARION CLR-303L &...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17080014* & 17080015 TRANSMISSION GEAR *Transmission gear numbers 17080014, 17080015, 1708008-01001, & 1708009-01001 are all the same part that were just assigned different numbers over the...

OKUMA  17100045* & 17100046 LINE GUIDE ASSEMBLY This line guide assembly is now the replacement or upgrade for numbers 17100045, 17100046, 1171001306917, & 1171001306002. *Please note that in some...

OKUMA 17120037 & 17120080* WORM SHAFT *Worm shaft numbers 17120037, 17120080, & 11712029-03001 are all the same part that were just assigned a different production number. CATALINA CT-30D &...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 17200005 DRIVE GEAR SHAFT...

OKUMA 18000015 CLUTCH CAM (11800004-12003) *Please note that product may arrive in an anodized black or gray finish as shown in photographs. CATALINA CT-15C, 15D, 15L, 20C, 20D, 20L, 25C, 25CS, 25D, 25L, 30C, 30CS,...

OKUMA 18010021 CLUTCH SPRING CATALINA A SERIES CT-30DA & 45DA COLD WATER CW-303D & 453D COLD WATER HIGH SPEED WIRE LINE CW-303DS & 453DS COLD WATER A SERIES CW-45DA &...

OKUMA 09301058 CLUTCH BAR SCREW (0331042-01)

OKUMA 18040008* &18040015 CLUTCH CAM SLIDER (011804008-06001) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 305Da, & 455Da CATALINA A SERIES CT-30DA & 45DA CEDROS CSD-10,...

OKUMA 18050004 PINION GEAR YOKE (11805004-06001) *On some parts diagrams this may also be referred to as the "clutch yoke". BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D,...

OKUMA 18060004 YOKE SPRING (1180600102)

OKUMA 18070001 & 18070002* YOKE BRAKE PLATE *Part numbers 18070001, 18070002, 11807001-06001, & 11807001-06001 are all the same part that were just assigned different production numbers...

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19000002 WORM SHAFT TRANSMISSION GEAR 'E' RETAINER (11900002-06) This is the very small 'E' retainer located at the end of the worm shaft on the counter side that secures the small conical plastic gear that...

OKUMA 0910080, 0910152, 0910153, 0910694, & 0910695* ONE WAY BALL BEARING *Ball bearing numbers  0910080, 0910152, 0910153, 0910694, 0110160901, 01101609-6, & 01101609-61 are all the same part...

OKUMA 0930438 SCREW (03122x8-61) On spinning reels, this is one of several screws that secure the side plate to the main body & once the rotor is removed, is located above the one way ball bearing. On star drag line...

OKUMA 09301304 COUNTER COVER SCREW (LONG)

OKUMA 0920076 WASHER (023.5x6x0.5-3) BAITCAST REELS: This is the washer that resides under the 'E' retainer that secures the clutch bar support in place. STAR DRAG REELS: This is the washer that is found...

OKUMA 0930060 SIDE PLATE SCREW (03122.6x9-61)

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the washer that generally resides on the worm shaft between the worm shaft bushing & 'E' clip on the handle side of the reel...

OKUMA 0920111 WASHER (025.1x11.5x.5-6) This is the washer that generally resides between the yoke brake plate & the hold plate bushing...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 09301335 HANDLE NUT RETAINER...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0930219 CLICK PAWL SPRING & HOLD PLATE MOUNTING SCREW (03327.5x2...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0920157 WASHER (028.1x12x0.8-6)

OKUMA 0920117 WASHER (025x6.2x0.2-6)

OKUMA 26120056 KEY...

OKUMA 0920326 STAR DRAG KNOB FRICTION WASHER (028.1x12x0.5-0) This is the washer that is located between the star drag knob & the click gear index...

OKUMA 0930194, 0930195, & 0930609* SCREW (03312X5-617 & 03312X3.5-61) *Screw numbers 0930194, 0930195, 0930609, 03312X5-617, & 03312X3.5-61 are all the same part that were just assigned a different...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

OKUMA 0940025* & 12210001 "O" RING (11221001-07) This is the 'O' ring that is seated at the base of the threaded brass boss on the main drive side plate for the cast control knob...