MG-30LS

EXCLUSIVELY USED BY TUNA'S REEL TROUBLES!    MADE IN USA This listing is for one cup of grease containing at least 1.5 oz. that we use as a great metal to metal lubricant that helps to aid in preventing...

Rotary tool buffing wheel 15/16" MC13 180 grit Scotch BriteTM abrasive. This will easily fit in any drill as well...Check out the photos... You don't want to rebuild without...

OKUMA 0.25 OZ. REEL OIL (19020001)

OKUMA 16000084 CAST CONTROL CAP *Cast control cap numbers 16000054, 16000055, 16000084, 11600016-03002, & 11600016-03003 are all the same part that were just assigned a different number with some "cosmetic" changes...

OKUMA 16000054 & 16000055 CAST CONTROL CAP KIT & SHIM KIT *Cast control cap numbers 16000054, 16000055, 16000084, 11600016-03002, & 11600016-03003 are all the same part that were just assigned a...

OKUMA 17150003, 17150004, 17150008, & 17150009* LINE GUIDE PAWL Line guide pawl numbers 17150003, 17150004, 17150008, 17150009, 111715003-06, 111715003-06001, 111715003-16001, & 111715003-16001C are all...

OKUMA 11050006 WORM SHAFT BUSHING (11105003-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the either end of the worm shield...

OKUMA 11050007 WORM SHAFT BUSHING (11105004-01) *Please note that this worm shaft bushing may arrive in either black or white molded plastic & is used for the "notched " end of the worm shield...

OKUMA 12010013 ANTI-RE PAWL (11201013-06001) BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, & 45L CONVECTOR CN CN-30CS CONVECTOR CV...

OKUMA 29010001 WASHER (12901001-06) This is also referred to as a "push nut" or "press on retainer"...

OKUMA 12070070 HOLD PLATE (1120703801) CATALINA CT-25C, 25CS, 25D, 25L, 305Da, 30C, 30CS, 30D, & 30L CLARION CLR-303L & 304D CONVECTOR CV-30C, 30CS, 30D, 30DS, & 30L CONTOURA CR-303CS CUSTOM...

OKUMA 12150013 & 12150015* HOLD PLATE BUSHING *Bushing numbers 12150013, 12150015, 11215009-03001, & 11215011-03001 are all the same part that were just assigned a different production...

OKUMA 12240004 & 12240017 ONE WAY BEARING CUP...

OKUMA 12110002 & 12110006* ANTI REVERSE PAWL PIN *Part numbers 12110002, 12110006, 11211002-03001, 11211002-03, & 11211005-03001 are all the same part that were just assigned a different...

OKUMA 12160006*, 12160007, & 12160011 ANTI REVERSE PAWL & CLICK SPRING *Spring numbers 12160006, 12160007, 12160011, & 1121600401 are all the same part that were just assigned a different...

OKUMA 12160004 ANTI-RE PAWL SPRING *Spring numbers 12160004, 11216001-06, & 11216001-06002 are all the same part that were just assigned a different production number. CATALINA CT-15C, 15D, 15L, 20C,...

OKUMA 13020002 & 43020018 WASHER (11302002-03001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 13020025 WASHER (1130201301) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 13030063 & 13030064 CLICK KNOB (1130301302 & 1130301402) CATALINA CT-205Da, 305Da, & 455Da MAGNETIX  MG-15CS, 15LS, 20CS, 20LS, 30CS, 30LS, 45CS, &...

OKUMA 13040011 CLICK PAWL (1130401301) CLARION CLR-203L, 303L, 453L, & 453LS CONTOURA CR-203CS. 303CS, & 453CS CORTEZ CZ-5CS, 5CSa, 10CS, 10CSa, 12CS, & 12CSa MAGNETIX  MG-15CS,...

OKUMA 13040013 CLICK PAWL (1130401201) CATALINA CT-305Da CLARION CLR303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS MAGNETICS MG-30CS, 30LS, 45CS, & 45LS MAG SYSTEM MS-15CS, 15LS, 20CS, 20LS,...

OKUMA 13050009 CLICK PAWL SPRING (1130500301) CATALINA CT-305Da & 455Da CEDROS CSD-10, 10S, 12, 12S, & 15S CLARION CLR-303L, 304D, 453L, 453LS, & 454D CONTOURA CR-303CS & 453CS CORTEZ CZ-10CS,...

OKUMA 14010030 STAR DRAG CLICK GEAR...

OKUMA 15150001 & 15150002* HANDLE NUT LOCK / RETAINER SCREW *Screw number 15150001, 15150002, 11515001-03907, & 11515001-06001 are all the same part that was just assigned a different production number...

OKUMA 16090002, 16090003, 16090004*, 16090009, & 16090024 DRAG SPRING WASHER *Drag spring washer numbers 16090002, 16090003, 16090004, 16090009, 16090024, 11609003-05907,11609003-06001, 11609003-06002,...

OKUMA 16110037 & 16110045 EARED WASHER (1161101201 &...

OKUMA 16120035 KEY WASHER (11612015-06001)

OKUMA 16120032 KEY WASHER (11612012-06002)

OKUMA 16140001 & 16140003* DRAG SPRING WASHER This is the spring washer that prevents any binding issues between the star drag knob & the handle arm itself. *Washer numbers 16140001,...

OKUMA 13020014 & 13020015 WASHER (11302002-06001) *Please note that this product may arrive in either a steel or copper finish...

OKUMA 16180002 WASHER (1161800201) This is the black rubber spacer that resides inside the cast control cap between the inside of the cast control cap & the metal end thrust washer...

OKUMA 17030004 & 17030006* WORM SHAFT GUARD (11703007-03907) AURORA CLASSIC CL-30L AVENGER AV-300L BTL BTL-907 CATALINA CT-30D, 30L, & 305Da CATALINA A SERIES CT-30DA CLARION CLR-303L &...

OKUMA 17040008 LINE GUIDE SUPPORT BAR (11704005-03907) *This part may be referred to as the "Line guide support bar, Worm guide support bar, or Line guide pivot." AVENGER AV-300L CLARION CLR-303L & 304D CLASSIC PRO...

OKUMA 17050013 WORM SHAFT TRANSMISSION GEAR (11705008-06) This is the brass or steel transmission gear that is located at the end of the worm shaft on the on the click side of the reel frame that is...

OKUMA 17060006 TRANSMISSION GEAR (11706003-06) This is the brass or steel transmission gear that resides on the end of the spool shaft on the clicker side of the reel that is secured be 'C' retainer #19000001. AURORA...

OKUMA 17070004 & 17070023 TRANSMISSION GEAR (11707003-01) This is the transmission gear that is located on the clicker side of the reel that is secured with one Phillips screw to the side cover & is...

OKUMA 17120014, 17120019, 17120020*, & 17120055 WORM SHAFT *Worm shaft numbers 17120014, 17120019, 17120020, 17120055, 11712005-03, & 11712010-13907 are all the same part that were just...

OKUMA 17130001 & 17130002* LINE GUIDE PAWL CAP Pawl cap numbers 17130001, 17130002, & 11713001-03907 are all the same part that were assigned a different production number...

OKUMA 18000012 & 18000014* CLUTCH CAM / CLUTCH SHAFT Clutch cam numbers 18000012, 18000014, 11800004-02002, & 11800004-12002 are all the same part, that were just assigned a different production...

OKUMA 17200002 DRIVE GEAR SHAFT BUSHING (11720002-06001) *This drive gear shaft bushing has an overall length of .5165" (just a hair over 1/2" or 13...

OKUMA 18010007 & 18010012* CLUTCH SPRING (11801005-06001) AVENGER AV-300L CATALINA 25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 305Da, 45C, 45D, 45L, & 455Da CLASSIC PRO CLX (XT)...

OKUMA 18020001 CLUTCH BAR (11802003-01) CLASSIC PRO CL-150, 200C, 200L, 202, 202C, 202L, 300, 300C, 300L, 300LX, 302C, 302L, & 302LX CLASSIC PRO XT CLX-150La, 200L, 200La, 300L, 300La, 300LX, 300LXa, 300LXaG,...

OKUMA 0930732 CLUTCH BAR SCREW

OKUMA 18040008* &18040015 CLUTCH CAM SLIDER (011804008-06001) CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D, 30L, 45C, 45D, 45L, 305Da, & 455Da CATALINA A SERIES CT-30DA & 45DA CEDROS CSD-10,...

OKUMA 18050004 PINION GEAR YOKE (11805004-06001) *On some parts diagrams this may also be referred to as the "clutch yoke". BIG LAKE TROLLING BLT-30D & 30DX CATALINA CT-25C, 25CS, 25D, 25L, 30C, 30CS, 30D,...

OKUMA 18060004 YOKE SPRING (1180600102)

OKUMA 29000001 'E' RETAINER...

OKUMA 29000006 'C' RETAINER (12900006-06001)

OKUMA 19010001 'C' RETAINER (11901001-06) On Conventional Reels: This 'C' retainer is used on the clicker side of the spool shaft that secures either the brass, steel or white plastic transmission gear (#706) in...

OKUMA 46010003 DRAG CLICK INDEX COMPRESSION SPRING (14601002-06001) INDURON IDx-150, 150a, 250, 250a, 250LX, 250LXa, 400, & 400a MAGNETIX  MG-15CS, 15LS, 20CS, 20LS, 30CS, 30LS, 45CS, & 45LS RED...

OKUMA 46040006 CONTROL CLICK (14604004-06001) INDURON IDx-150, 150a, 250, 250a, 250LX, 400, 400a, & 400LX MAGNETIX MG-15CS, 15LS, 20CS, 20LS, 30CS, 30LS, 45CS, & 45LS RED ISIS Ri-400P &...

OKUMA 46170001 DRIVE GEAR BUSHING (14617001-03001) INDURON IDx-150, 150a, 250, 250a, 250LX, 400, 400a, & 400LX MAGNETIX MG-15CS, 15LS, 20CS, 20LS, 30CS, 30LS, 45CS, & 45LS RED ISIS Ri-400P & 400T SAN JUAN...

OKUMA 0930429 SCREW...

OKUMA 0920108 WASHER (025.1x10...

OKUMA 0930171 SCREW (03222.6X4.5-61) On conventional star drag reels this screw is used to secure the one way bearing cup to the handle side plate. On spinning reels this screw is used to secure the transmission...

OKUMA 0920076 WASHER (023.5x6x0.5-3) BAITCAST REELS: This is the washer that resides under the 'E' retainer that secures the clutch bar support in place. STAR DRAG REELS: This is the washer that is found...

OKUMA 0920282 WORM SHAFT WASHER (025.1x8x0.2-6) *This is the washer that generally resides on the worm shaft between the worm shaft bushing & 'E' clip on the handle side of the reel...

OKUMA 0920162 WASHER (028x10x0...

OKUMA 0920111 WASHER (025.1x11.5x.5-6) This is the washer that generally resides between the yoke brake plate & the hold plate bushing...

OKUMA 0920373 WASHER (023x8x0...

OKUMA 0930566 SCREW (03222...

OKUMA 0930501 SPOOL CLICK GEAR SCREW (03212x5-617) This is the small screw that attaches the spool click gear to the actual spool itself. Two are required...

OKUMA 0930928 SCREW...

OKUMA 0930651 SCREW (03327.5x2.6x7.5-61) This is the screw that secures the white or black transmission gear to the vice side plate (clicker side plate) & in some applications helps secure the hold plate to the...

OKUMA 0930176 SCREW (03222.6x9...

OKUMA 0920114* & 0920284 DRIVE GEAR SHAFT WASHER Washer numbers 0920114, 0920284, 025.1x10.5x0.2-6, & 025.1x9.5x0.2-6 are all the same part that were just assigned a different production number...

OKUMA 0910026, 0910248*, 0910249, 0910250, 0910251, & 0910349 BALL BEARING *Ball bearing numbers 0910026, 0910248, 0910249, 0910250, 0910251, 0910349, 01061335-6, 01061335-6, 01061335-601, 01061335-611,...

OKUMA 0920326 STAR DRAG KNOB FRICTION WASHER (028.1x12x0.5-0) This is the washer that is located between the star drag knob & the click gear index...

OKUMA 0930194, 0930195, & 0930609* SCREW (03312X5-617 & 03312X3.5-61) *Screw numbers 0930194, 0930195, 0930609, 03312X5-617, & 03312X3.5-61 are all the same part that were just assigned a different...

OKUMA 43040004 CLICK PAWL (14304006-03001) INDURON IDx-150, 150a, 250, 250a, 250LX, 250LXa, 400, & 400a MAGNETIX  MG-15CS, 15LS, 20CS, 20LS, 30CS, 30LS, 45CS, & 45LS RED ISIS Ri-250P, 250T, 400P, &...

OKUMA 0920066 & 6K148801 LINE GUIDE PAWL WASHER (022X4.9X0.2-3) This is the small brass or steel washer (or shim) that resides inside the pawl cap (or level wind nut) on all level wind equipped reels which is also...

OKUMA 0910012, 0910226, 0910227*, 0910228, 0910229, & 0910350 BALL BEARING Ball bearing numbers 0910012, 09100226, 0910227, 0910228, 0910229, 0910350, 01041104-61, 01041104-601, 01041104-611, &...

OKUMA 0920133 CLEAR HANDLE WASHER (026x13x0...

OKUMA 0920085 & 0920370 CLICK BUTTON WASHER *Washer numbers 0920085, 0920370, 024.05x10x0.2-8, & 024.05x10x0.3-8 are all the same part that were just assigned a different production number over the years. This...

OKUMA 0930196 & 0930894 CLICK BUTTON SCREW (03312x5-61) On Baitfeeder reels-This is the screw that generally secures the clutch slider to the clutch cam. On Star Drag reels-This is the screw that secures the click...

OKUMA 0930202 DRIVE GEAR SHAFT SCREW (03319.4x3x7-61) This is the screw that secures the drive gear shaft (#701) to the hold plate (#207). This drive gear shaft screw will work on all right hand retrieve conventional star...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS 4" wide by 3" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...

Decorate your Boat, Truck, Car, Laptop, or whatever else you can think of with this official DRAGMASTERS  8.5" wide by 3.75" high long-life vinyl decal. This sticker is of a high quality, U.V resistant, water resistant,...